Your cart is empty.
Your cart is empty.Product Description
The B1 Binocular Adapter was designed to be the sleekest digiscoping system available on the market. No longer do you have to make the choice between stomping around your spotting scope to film or leaving it behind but missing the opportunity to capture footage at a distance.
Impossibly small yet impressively strong, the B1 Adapter seamlessly integrates with your binocular of choice. Slip it onto the eyecup and tighten the retaining screw. That’s it. A set it and forget it design does not impede normal use of the binocular, making this tool an efficient and practical addition to your kit. Together with the MAGVIEW Phone Plate, this system creates the ultimate light and fast digiscoping platform for steady, sharp photo and video, every time.
B1 – Fits eyepiece sizes 38.5mm-43mm (1.5in-1.7in).
B1 XL – Fits eyepiece sizes 44mm-48mm (1.73in-1.89in)
Larry Kapigian
2025-08-25 13:48:55
Would be nice if it came with a lens cover as the one that come with your binoculars won’t fit , so I’m constantly taking the magnet off….. Edit after a few weeks of use I would not recommend it at all…. The lack of cover means I’m having to remove it after using and the magnet is not strong enough IMO for iPhone 15 to keep it from moving ….Final edit , pure garbage
Chandler Hoisington
2025-06-23 14:03:19
For the price these need to be easier to use or they need better instructions. It’s a pain in the rear to line them up with the camera. Once it’s lined up it’s fine. Good luck. By the time you line it up your animal is likely in the next county.
Sarah Long
2025-05-21 18:44:09
Adapter ring does not fit real secure on binoculars (Vortex vipers). Once you get the ring on it is very hard to line up the phone for a full field of view. I will go back to my phone scope and send this junk back.
Big D
2025-05-07 09:57:57
Great Idea, tough to get it to work with any speed or consistency. Bought it to take on a mountain horseback trip in Wyoming. Set up on mountainside on a tripod with my Swarovski EL range binos. I'm prepping for the same trip this fall for mule deer. Tough to line up the lens, binos are too heavy to leave flat, it spins your other eyecup immediately. Well built though. Maybe under the right circumstances it will work for some folks.
Abraham Esparza Valverde
2025-05-06 14:34:43
I wanted to work like the S1 on the spotting scope but seems like the magnet not strong enough
DbleAron
2025-05-01 13:33:53
As you can see in the picture I removed the mechanism because it simply doesn’t work as advertised.Magnetic plate was correctly installed onto phone. No case in between B1 and plate.When lining up the camera there isn’t enough magnetic “grip†to keep the phone in place and it starts to slowly slide or droop. This is inside with no wind, no movement of the ball head, so would only be worse in the field.Will be returning and advising fellow hunters of the poor design and execution on the B1.
Lee
2025-01-15 11:09:05
Works good
Recommended Products