Your cart is empty.
Your cart is empty.Product Description
HIGH ACCURACY AND WIDE RANGE
Performance tested & certified accurate to ±1% (Relative Humidity Temperature 25°C) with display resolution of 0.5 psi; FOUR different measuring units to choose for a wide range of measurement: 5 ~ 200 PSI, 0 .35~ 14 BAR, 0.35 ~ 14 KG/CM2, 35 ~ 1400KPA.
HEAVY DUTY DESIGN
The digital gauge will withstand impacts and keep its accuracy over the service life even if the they are subject to impacts. Shock resistance, vibration resistance and durable. Solid Construction, Universal Standard thread Connection 1/8" NPT thread.
Convenient Connection Way
1/8" NPT . easy to install and disassemble,
Potable to measure at anytime and anywhere.
BATTERY SAVING
Easy to replace. After measuring, the pressure gauge will turn off automatically after 150s of inactivity to preserve battery life.
WIDE APPLICATION
WIDE APPLICATION for measuring gas, air pressure. It applies to these fields of pressure container, automation equipment, matching with laboratory equipment and all vehicles tires including heavy duty ones.
The part was a perfect fit, and easy to install!
2025-09-05 16:25:18
I was replacing my old gauge that failed with this new one from Amazon. It works really well, and registers the correct psi, with a backlit display that makes it easy to read.
A system integrator
2025-09-01 13:06:39
One review says it doesn't work for auto tires out of the box and required a $10 adapter purchase, and that the seller should have been more forthcoming.LOL! It's right there in the title - the gauge comes with 1/8" NPT, or National Pipe Taper. This is 1/8" inside diameter with tapered threads that are 27 per inch, or 1/8-27TPI. Since it is male, this means the gauge comes with 1/8" MNPT threads.Tire valves are 5/16" with parallel threads that are 32 per inch, or 5/16-32TPI (M8x0.8 in metric). In other words, the tire is a Schrader valve.The plumbing and HVAC world is rife with seemingly conflicting (or compatible) fittings that appear to conflate inside and outside diameters. Don't mess with them unless you know what you're doing. For example, a tapered 1/8" NPT is not the same as a tapered 1/8" BSP (which is the British Standard Pipe). Then there's G1/8", which is BSPP, or British Standard Parallel Pipe, where the threads are not tapered. Good Luck!Meanwhile I used it to replace the analog gauge on a Masterflow MF-1050, a high-volume auto inflator (57 LPM) that hooks directly to the battery. This gauge is a bit larger in diameter than the original gauge, so I had to reverse the direction of the handle, but not too big to prevent screwing it into the unit.Getting to the batteries will be a slight challenge, but hopefully won't need to be changed often.
Sherry R
2025-08-11 17:37:05
Purchased to repair a damaged inflation tool. Gauge had been smashed but rest of the tool was intact. Replaced smashed gauge with this product and it’s now better than new! Excellent value.
baxter the basset hound
2025-07-19 17:35:07
I wanted to use this on a portable air tank to monitor the pressure, but I soon realized that it never turns off when there is pressure present. The back light turns off, but not the unit itself. This drains the batteries and would require them to be replaced every couple of weeks or so. This is better suited to be used on air tools rather than as a pressure gauge on tanks.
DonL
2025-07-10 10:02:54
I replace an analog gauge with this one and am very pleased.
Laurel Ebanks
2025-07-04 14:39:45
It works well for me. I replaced my analog with this digital unit.
Manzo
2025-06-13 21:19:31
See photo. The terminals to "series the batteries" is missing on one side. The replacement came in today. It has the terminal that is needed. So far I like the gauge...I will re-rate after I use it a few times. This one just happened to be missing a piece.
Ryan M Wilson
2025-05-23 14:07:16
This replaced a dial gauge and it fit perfectly. It’s easy to use, easy to read and bright enough to read in the daylight.
frank
2025-04-27 11:33:52
Quality item
mia1
2025-03-17 21:20:58
Accurate to 0.2lbs at 35psi
Mcgyvr
2025-02-13 10:25:54
and nicely built.
Recommended Products
$34.06
$ 16 .99 $16.99