Your cart is empty.
Your cart is empty.Our LED third brake light is a quick and easy way to dress up your pickup truck. When lit, the bright LEDs (Light Emitting Diodes) are illuminated, and shine up to ten times brighter than standard light bulbs. The LED third brake light has a durable Polycarbonate Lens with free form reflector, and available with either the Clear lens or custom Smoked lens.
Mcotto
2025-09-05 10:47:22
These lights are pretty good, bright and easy to install
Jenae singleton
2025-08-28 15:06:36
This is only been installed for a month or two first big rain moistures inside also this is my second one first one I cracked by over tightening the screw should have been a red flag for me but I like the way they looked
Ugh
2025-08-27 17:19:12
Install was easy, would be great if you could install it flipped. Either way when this deletes the cab lights for some reason it also kills the Cruze control. Also lights up 3 times when the break pedal is depressed and then stays solid. Put my old stock one back in and everything works fine. The clear plastic bubble lens is also HUGE. It sticks out a good couple of inches and looks kinda goofy from the side. Makes it much easier to crack as well.
Don Michael Corbin
2025-08-13 11:02:51
This will not fit the opening for the third breaklight, the plug is not the same so it's not"plug and play", nor do the bolt holes come anywhere close to lining up with the original. This light may fit something, but it doesn't fit a 2004 Chevy Colorado.
Patrick L.
2025-08-11 12:30:30
The oem screws barely reach and makes for a sketchy connection to the body of the truck. Not much of the screw is biting into the fastener hole. If the holes were more recessed in it’d be a 4 star product. Also it’s not that bright at all and the lense is foggy/hazy at the bottom
MDM
2025-08-07 16:03:57
It has what looks like small scratches at the edges that aren't noticeable when installed but are apparently cracks because the first time it rained the housing got water in it very poor quality
Mike Harrington
2025-07-28 21:43:26
I received the light in excellent condition. Removed my old assembly, plugged this one in and checked it. Worked great. Looks good. Went to attach it to the truck. Set one screw part way in, started the second. As soon as the gasket made contact, the plastic around the screw broke. Using just a hand screwdriver. Was hoping for better. Will try something else.
Mandy T
2025-07-26 17:51:06
I have a 06 chevy colorado the cargo lights work just fine but my brake light doesnt work
The Browns
2025-07-22 17:05:17
The housing itself looks great and is sealed properly. The lights are bright and work like they should. Beware though that (at least for my 07 Chevy Colorado LT) the computer uses this light as a signal for the cruise control. Because these lights are led there is not enough resistance for the computer to recognize that it is working therefore it will not allow cruise control to activate. You must splice in a resistor or find a solution that adds enough resistance to the circuit to allow for cruise control to activate. Also make sure to have automotive use silicone to seal it the the body properly.
Bren L
2025-06-28 17:00:21
A year later and it's still working well.Much better than oem
PAULO SERGIO DIAZ ESPARZA
2025-06-24 10:38:31
Quedan exacto, y brilla bien, esperemos con el tiempo que asà siga
Javier R.
2025-06-08 20:27:10
Seve genial
Customer
2025-05-15 16:52:44
Product receive was not exactly as pictured. There was no resistor which led to cruise control not working.. Seems it will not work on a 2010 chevy anyway.. Lights up and everything, but leaves other features not functioning…
Mcotto
2025-04-26 14:29:17
These lights are pretty good, bright and easy to install
Jenae singleton
2025-04-16 11:03:44
This is only been installed for a month or two first big rain moistures inside also this is my second one first one I cracked by over tightening the screw should have been a red flag for me but I like the way they looked
Ugh
2025-04-10 10:58:35
Install was easy, would be great if you could install it flipped. Either way when this deletes the cab lights for some reason it also kills the Cruze control. Also lights up 3 times when the break pedal is depressed and then stays solid. Put my old stock one back in and everything works fine. The clear plastic bubble lens is also HUGE. It sticks out a good couple of inches and looks kinda goofy from the side. Makes it much easier to crack as well.
Don Michael Corbin
2025-03-25 17:00:14
This will not fit the opening for the third breaklight, the plug is not the same so it's not"plug and play", nor do the bolt holes come anywhere close to lining up with the original. This light may fit something, but it doesn't fit a 2004 Chevy Colorado.
Patrick L.
2025-03-22 14:57:45
The oem screws barely reach and makes for a sketchy connection to the body of the truck. Not much of the screw is biting into the fastener hole. If the holes were more recessed in it’d be a 4 star product. Also it’s not that bright at all and the lense is foggy/hazy at the bottom
MDM
2025-03-21 11:02:21
It has what looks like small scratches at the edges that aren't noticeable when installed but are apparently cracks because the first time it rained the housing got water in it very poor quality
Mike Harrington
2025-03-01 15:59:13
I received the light in excellent condition. Removed my old assembly, plugged this one in and checked it. Worked great. Looks good. Went to attach it to the truck. Set one screw part way in, started the second. As soon as the gasket made contact, the plastic around the screw broke. Using just a hand screwdriver. Was hoping for better. Will try something else.
Mandy T
2025-02-22 12:06:38
I have a 06 chevy colorado the cargo lights work just fine but my brake light doesnt work
The Browns
2025-02-06 15:06:54
The housing itself looks great and is sealed properly. The lights are bright and work like they should. Beware though that (at least for my 07 Chevy Colorado LT) the computer uses this light as a signal for the cruise control. Because these lights are led there is not enough resistance for the computer to recognize that it is working therefore it will not allow cruise control to activate. You must splice in a resistor or find a solution that adds enough resistance to the circuit to allow for cruise control to activate. Also make sure to have automotive use silicone to seal it the the body properly.
Bren L
2025-02-02 15:01:04
A year later and it's still working well.Much better than oem
PAULO SERGIO DIAZ ESPARZA
2025-01-29 13:40:40
Quedan exacto, y brilla bien, esperemos con el tiempo que asà siga
Javier R.
2025-01-15 16:11:17
Seve genial
Customer
2024-12-27 12:41:51
Product receive was not exactly as pictured. There was no resistor which led to cruise control not working.. Seems it will not work on a 2010 chevy anyway.. Lights up and everything, but leaves other features not functioning…
Recommended Products
