Your cart is empty.
Your cart is empty.Product Description
R&F Auto Smoked Lens LED Third Brake Lights Replacement for Tacoma 2016-2023 High Mount Stop Lamp F1 Style Strobe
Fitment:
Compatible with Tacoma (2016 2017 2018 2019 2020 2021 2022 2023 );
Replacement for Tacoma Limited, SR, SR5, TRD Off-Road, TRD Sport
For double cab ONLY, NOT Fit for Models w/ Original LED Third Brake Light, Does NOT fit to Tacoma has existing exterior screws on OEM 3rd Brake Light
Replace OEM Part Number:
81570-04051, 81570-04040, 81570-04050
Powered by High power red LED chips
High performance and super bright long-lasting LED chips ensure that you remain highly visibility on the road, better enhance the safety of driving in daytime and nighttime.
Red for brake lights; white for roof cargo light
- LED 3rd Third Brake Light ( Red), Red light current 0.200-0.220A when the F1 style hyper flash;
- LED roof cargo light (White), White light current 0.200-0.220A
Materials:
- High Gloss Clear Polycarbonate lens and ABS housing for high durability.
Package Include:
1pcs LED third brake light (Smoked Lens)
Features:
- Bulb Type: LED
- Voltage: DC 12V
- Lens Color: Smoked
- Light color: Red+White
- Position: Rear Upper
- Super Bright: High-quality lamp beads with longer life.
- Installation: Plug and play
Upgraded Design:
- Ventilation Hole: 2-in-1 ventilation hole for third brake lamp's gasket, under the purpose of achieving waterproofing, it can also facilitate heat dissipation and discharge water vapor.
- Sealed Foam Padded: LED third brake light with foam padded prevents water from any sand, water, dirt, snow or dust leaking in.
- Integrated Strobe Switch: when you initially step on the brake, it flashes 5 times quickly then stays fully on until you lift your foot off the brake. The quick flash can be activated or deactivated with the switch.
- OE Socket, Plug & Play: Plug and play installation, direct replacement of the OEM factory CHMSL light.
Perfect update or replacement for original third brake light, give your car a cool fashion look!
Katie
August 31, 2025
This light looks awesome and the strobe on first press of the brake pedal is what I was looking for. This looks way cleaner than the factory one, no chrome showing. Only downside is this project is the biggest pain in the butt. This is the 2nd time I have done this and will pay someone to do in the future, I did all my lighting on my truck, bumpers, skid plates winch and this was the hardest. Just keep that in mind. I would buy again and pay to have it installed. Great product, great seller!
Sergio Fragoso Jr
August 12, 2025
Gives much better light than the OEM verson fit perfectly on my 2003 tundra
Lisa Gwyn
August 10, 2025
I like the product and LEDs should last a long time. It looks good and I don’t think it is too hard to install. A little more than changing a bulb but only took about 15 minutes. Wjat would make it better is if the cargo light was pointed down where the cargo is and not up where my eyes are. Send me an updated version and I’ll test it for you! ;). And the rubber seal that fits against the top of the cab should be included. The switch on mine for the strobe option was the opposite of what the instructions say. With the switch ‘off’ the strobe is working.
Michael M.
June 16, 2025
The media could not be loaded.
Chrispy
April 6, 2025
After a few weeks it’s half full of water and the brake light function has shorted out. The water is getting in between the base and the lens cover. Not between the truck and the base.
DoggySurfer
February 25, 2025
High quality product, sits flush after bolts are tight, install is pretty difficult
Scott Surratt
January 22, 2025
Good fit and works perfectly
Scott Harris
December 5, 2024
Great upgrade. Significantly brighter than the stock brake light. The strobe feature is why I purchased. It demands attention once you hit the brakes as it flashes for a second before turning solid red. The dark color of the lens matches my blacked out Tundra perfectly.Easier to install than most videos suggest. Use tape to hold the nuts more securely on your socket while reinstalling. Access is limited however easy to get to once you drop the rear window all the way down and simply use a panel removal tool to pop down 4 pin clips the hold the headliner in place. No need to remove anything to drop the headliner down a little.2/5 for install difficulty, 5/5 for product quality.
Recommended Products