Shopping Cart

Your cart is empty.

Your cart is empty.

Dorman 610-566 M12-1.25 Serrated Wheel Stud - 14.38mm Knurl, 43.5mm Length Compatible with Select Scion / Subaru / Toyota Models, 10 Pack

Free shipping on orders over $29.99

$24.40

$ 12 .99 $12.99

In Stock

About this item

  • Durable material - carbon steel meets SAE automotive industry standards for strength and hardness
  • Corrosion tested - 72-hour salt spray testing simulates three years of corrosion resistance
  • Tensile tested - lug studs undergo industry-standard proof-load testing to ensure strength
  • Trustworthy quality - backed by team of professional engineers and quality control specialists in the United States
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage


These wheel lug studs are made of carbon steel and tested to demanding automotive industry standards to ensure strength, longevity and safety. Vehicle model years this part fits (be sure to check your vehicle trim using the Amazon garage) - [Scion FR-S: 2013, 2014, 2015, 2016] - [Subaru Ascent: 2019, 2020, 2021] - [Subaru B9 Tribeca: 2006, 2007] - [Subaru BRZ: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020] - [Subaru Crosstrek: 2016, 2017, 2018, 2019, 2020, 2021] - [Subaru Forester: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021] - [Subaru Impreza: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021] - [Subaru Legacy: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022] - [Subaru Outback: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022] - [Subaru Tribeca: 2008, 2009, 2010, 2011, 2012, 2013, 2014] - [Subaru WRX STI: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021] - [Subaru WRX: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021] - [Subaru XV Crosstrek: 2013, 2014, 2015] - [Subaru XV: 2013, 2014, 2015, 2016, 2018, 2019, 2020, 2021] - [Toyota 86: 2017, 2018, 2019, 2020]


Pedro Gonzalez
2025-09-02 16:04:07
Needed to replace 2 lug studs and these studs installed pretty easy on a 2014 Subaru Impreza.
The Cedar Roost
2025-08-30 10:12:32
I bought 30 of these when I only needed 20 just incase I broke one putting it in, or a few were defective. But I didnt need them what so ever. They arrived right on time and were all in good condition, no damage. I bought these to replace the weak stock studs and they are way better. I bought a stud installer because I was replacing all 20 on the Car, and it was well worth it. All 20 fit perfectly and snug. They held up 100% during install and fit smoothly on the new lug nuts
Steve
2025-08-23 12:58:55
Fits 2017 STI front hub, will see if it last longer than OEM against rust.Subaru dealer cross thread one lug and failed to admit it, didn't want to drive around with 4lug nut so I got these and a OEM lug nut, installation was quite easy watch a few youtube videos, an impact wrench is good to have to make install alot easier.
J T
2025-08-12 11:32:38
I bought these when the OEM studs on a 2016 Forester kept snapping. It's possible a shop over tightened the lugs at some point and killed the OEM studs, but at this point I have replaced about 15 OEM studs with these and they are holding up much better. If you snap even one stud on your Forester buy enough of these to do all the studs on the car, because it will only be a matter of time....
P.R.A.
2025-07-27 13:27:11
I have never broken a wheel stud before - so I was quite surprised when I removed the wheel to replace the breaks and busted one off on a Saturday afternoon. I was able to get a replacement at the dealership but then busted 2 off trying to take the next wheel off. All total I have replaced over half of all the wheel studs on this car. I don't know if it's cheap material, someone told me Subaru uses thin for wheel studs, or if they were just tightened to tight with an impact drill. My guess is its probably a combination of both. So I started telling the tire shop the torque spec and not to just ram the lug nuts on and rotating them myself. If you are ordering don't forget the lug nuts - chances are you need them too.
Bob Hanlon
2025-07-18 17:16:56
Had new tires installed on a 2015 Subaru Forester and several of the lug nuts/studs got cross-threaded. The weekend was approaching and I didn’t want to wait to take it back in to the shop that mounted the tires so I just ordered these and swapped them out myself. Installation is a snap. Parts from Dorman Products meet (and usually exceed) OEM specifications and I use their parts often.
TK
2025-06-08 13:08:01
When my mechanic rotates my tires, his high torque drill sometimes snaps a stud or two, so I keep these in my trunk. I also have the wheel nuts for them.
john e palmatier iii
2025-04-07 19:12:44
Added spacers to my golf cart and needed longer studs. These worked perfectly and a lot cheaper than I could’ve gotten locally.
Nik
2025-03-28 16:47:29
worked well as replacement studs on my Forester 2009
Yurii Puchkov
2025-03-24 10:09:44
Got a full set. Dorman stands behind its name.
Carlos B
2025-03-03 13:37:07
Llegaron rápido, y fácil su instalacion
Gerardo Tetlalmatzi
2025-02-18 15:58:00
El producto es igual al original para mi modelo, estoy satisfecho.
Josh
2025-01-24 13:39:40
Fit my 2020 Subaru wrx hubs, both front and rear with no issue. Make sure to buy the lug tool if you are going to change your lugs!
Recommended Products

$31.84

$ 16 .99 $16.99

4.7
Select Option

$38.39

$ 16 .99 $16.99

4.6
Select Option