Your cart is empty.
Your cart is empty.Product Description
32mm 36mm Automotive Fan Clutch Nut Wrench
Applicable
Compatible with, but not limited to the following applications: M10, M20, M30, M50, M52, M60, M70, M73, S14, etc
Applicable Vehicle:
- for 318i 1984-1985,1991-1998, 318is 1991-997, 318ti 1995-1999, 323i 1998-2000, 323is 1998-1999, 323Ci 2000, 325 1986-1988, 325Ci 2001-2006, 325e 1984-1987, 325es 1986-1987, 325i 1987-1995,2001-2005, 325is 1987-1995, 325iX 1988-1991, 325xi 2001-2005, 328i 1996-2000, 328Ci 2000, 328is 1996-1999, 330Ci 2001-2006, 330i 2001-2005, 330xi 2001-2005;
- for 524td 1985-1986, 525i 1989-1995,2001-2003, 525iT 1993, 528e 1982-1988, 528i 1997-2000, 530i 1994-1995,2001-2003, 533i 1983-1984, 5351i 1985-1993, 535is 1988, 540i 1994-1995,1997-2003;
- for 735i 1987-1992, 735iL 1988-1992, 740i 1993-2001, 740iL 1993-2001, 750iL 1988-2001;
- for M3 1988-1991,1995-2006, M5 1988,1991-1993,2000-2003.
Water Pump Holder Tool
use to easily hold the water pump pulley in place while loosening the radiator fan.
Fan Clutch Wrench
designed to easily remove the lock nuts on a temperature dependent thermo-viscous fan.
Size
the wrench opening is 32mm and 36mm, if you don't know this tool wether fit your car, please measure the nut size of you car fan , if is 32mm 36mm, that will fit
htgrimmi
August 26, 2025
The tool works just fine, you're going to have to rotate the fan with the wrench to get the bolts in the right spot. BMW really left one area, straight up by the water hose, to fit the tool in.Get the bolts lined up right and it's a done deal.
Richard Martin
August 16, 2025
works well on screw on fan clutches
kgreenrich
July 7, 2025
I bought this for my sons 1998 540i. We tried removing the fan without the tool with zero luck. The tool slipped over the 2 bolt heads and I had the 32 mm nut spinning off in seconds. Great fit. easy to use and worked exactly as it was was supposed to. The tools themselves are thick and hefty. They did the job.I cant speak to a nut that is frozen on. We had to use some force but not a ton of it. We hit ours with some penetrant and let it sit for a few minutes and the nut freed up easily. The tool was definitely with the money.
Johnny B
June 25, 2025
Works very well, used on an '01 330i and an '01 Z3 2.5i. Holes fit around the water pump bolts, so just angle it right. Need to take off the upper radiator hose too but it pops right off.
Mike Leonard
June 14, 2025
Looks fine, should work on the correct application.
Short Family
June 2, 2025
This wrench fits the BMW m62 V8 perfectly, however, you'll have a much harder time with a m54 motor as the stud grabber wrench (the one with the little holes) isn't really the right size. I know because I used this wrench on my e39 525i and my friend's e39 540i.
jettgear1
April 24, 2025
Excellent
King C
April 15, 2025
This tool works great. Easy to use. Saved me from having to rent one from the parts store.
E30 Dude
April 2, 2025
Great quality and priceAnd don’t fool yourself, this is way better than needle nose vise grips
Daddy
March 20, 2025
Schnell und gut qualitativ top.
Customer
March 10, 2025
Enlever la fan clutch
M.Y.
February 18, 2025
Wer denkt, dass er den Viskolüfter beim M54 mit diesem Werkzeug ganz einfach im Handumdrehen lösen kann, liegt falsch.Wenn man von oben arbeitet, passt das Werkzeug nur in einer einzigen Position.Bei dem M54 muss man quasi genau senkrecht zum Boden und genau rechts an der Vanos vorbei das Blockierwerkzeug anbringen (nicht einfach) und dann im Uhrzeigersinn den Lüfter lösen.Wenn man es erst ein mal raus hat, geht es relativ einfach.
DJ
December 27, 2024
it does what it says
Recommended Products
$68.50
$ 27 .99 $27.99
$25.95
$ 10 .99 $10.99