Your cart is empty.
Your cart is empty.Product Description
Quickly and easily change accessories on a Dremel rotary tool without changing collets with the Dremel Keyless Chuck. The 4486 Keyless Chuck eliminates the need for a collet and wrench when changing accessories. The steel 3-jaw chuck can be used with all Dremel rotary tools and can be used with all bits with a 1/32 In. to 1/8 In. shank. Ideal for light-duty accessories including drill bits, sanding drums, polishing wheels, wire & bristle brushes, cut-off wheels, and more. Can be used with Dremel 225 Flex Shaft and the 575 Right Angle attachment.
From the Manufacturer
Now have wrench-free accessory changes. The Dremel Chuck holds accessories without using a collet eliminating having to use a wrench and creating quick and easy accessory changes. Ideal when the application requires numerous accessory changes.
No name thanks
2025-07-19 11:17:40
Is the best keyless chick for this dremel size I know, holds the bits really tight, I’ve never had issues and is nice and small out of the way for fine detail work. And you don’t have to deal with using the wrench to tighten anymore just your fingers is all you need, also it’s really great it fits all size bits so no more dealing with switching out the collets makes things nice and easy when doing projects that require frequent changing of bits which if your like me is every project lol
Seahawks4life
2025-06-11 13:01:41
Works amazing with the M12 Milwaukee Rotary tool. I didn't know there was an accessory like this but I just stumbled upon it. It was cheap enough for me to buy it. The quality seems good. I have used it to cut some metal with precision.
Tyfighter
2025-06-07 11:39:43
Saw this in a YouTube video and bought it hoping it would fit my Milwaukee rotary tool. It did and now it's so much easier to change out tools and accessories. It's so good. They should make the standard on all rotary tools so you don't have to use that stupid mini wrench. Highly recommend getting this for your rotary tool.
Robbyg
2025-05-18 13:06:53
About the only thing i hate with my Dremel is the original chuck head. So you can imagine how excited I was to see they had a fix.Well it's an improvement but it still has some issues.Right out of the box I found the the advice in some of these reviews very helpful because the instructions are in micro size print and don't really explain the process properly. As stated in reviews it is a spring loaded head and the bit grips are tightened inward by the head being screwed down on the Dremel. So it is not like a traditional Drill chuck!The second issue is that the head width takes away some of the versatility that I had with the original head. It's still a better design but I wish they had come up with something even better. I would gladly pay a bit more for a slimmer version that could be tightened and loosen by hand like this one.The third issue is that the small area they provided underneath the chuck for the Dremel wrench to tighten the head down is very small edge and hard to see and use.Luckily for most applications hand tightening is good enough.Overall it's a vast improvement for some applications like using Drill Bits and cutting disks. I am not all that thrilled about using it with the Drum sanding bits as the Chuck is almost as wide as the largest Drum and way bigger than the small drums. It is pretty easy when working at 90 degrees to hit the material with the chuck and damage the item. Also they don't recommend using it with the router bits and I can see why.Basically a must have Item for high usage Dremel users, but it's not a singular Fix for the old chuck head.
Beach Bum
2025-04-26 10:50:19
Works good and so far good Quality
indianajohn
2025-04-21 18:32:22
There was a lot of confusion (for me) as to which keyless chuck will fit which rotary tool. But I rolled the dice and hoped this would fit my Wen 23072 cordless rotary tool. It fits perfectly!! Now I can put ANY of my bits into the tool regardless of their shaft size. Makes things so much easier.Took seconds to install and appears to be of very good quality too.
Rodrigo F.
2025-03-31 20:12:56
VERY GOOD QUALITY, HIGHLY RECOMMENDED
Dan M.
2025-03-25 14:03:13
So much better than the one you have to use a tool to change bits.
André Desmarais
2025-03-18 16:54:41
Why not include the chuck in the initial purchase of a Dremel. The chuck is a must. Easy loading and changing of bits. Why make it an extra item that you have to purchase separately.
Aykut Turkoglu
2025-02-25 16:17:02
Fiyatına göre bir ürün orijinali gibi beklentiye girmeyin
Mr. K
2025-02-14 15:34:39
Happy
gsquadchronicles
2025-02-12 16:16:06
Purchased this to utilize on my cordless Milwaukee rotary tool and it is a perfect fit!
S. D. Spicer
2025-02-06 13:00:12
Not much reason to hate it really. It's an original made by Dremel chuck and it works perfectly. Bit annoyed there wasn't one with the Dremel I brought, but that doesn't fault the chuck, just the marketing. Some of the knock-offs are fine, but others simply don't fit. I've had ones that worked and those which were a waste of time. If the price difference isn't huge - stick to the original.
Recommended Products
$12.99
$ 6 .99 $6.99