Your cart is empty.
Your cart is empty.Product Description
Thaekuns 2pcs 4 In 1 Drill Chuck Key Hand Drill Key Drill Chuck Wrench
Thaekuns 2pcs 4 In 1 Drill Chuck Key Hand Drill Key Drill Chuck Wrench
- Muye 4 In 1 Drill Chuck Key Hand Drill Key Drill Chuck Wrench For Tighten Drills Chuck Universal Combination Hand 3/8 1/2 3/4 1 Inch Chuck Key
- Features: 4 in 1, multi-function, more convenient. Wear resistance, durable antioxidation, long time for use.
- Notes: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-3cm measuring deviation due to manual measurement.
Jim Elvis
2025-09-04 21:00:36
What I like is that it has the four most common size pilot hole chuck keys. It did not fix my problem, I am trying to replace a lost chuck key from an old Craftsman. But it fits a few other drivers/drill motors in my box. I will say that the manufacturer dips these keys in enamel, so the pilot shaft is slightly larger until the lacquer wears off. In my case it was immediately after heavy use. Then what I did was take the next key that was slightly larger and re-drilled the pilot hole + 1/64's. It works good now. I knew I was going to need to modify the Chuck so for $5, it was worth the risk.
Richard Joseph Vaughan
2025-08-21 14:52:41
Returned did not fit drill press
Momentary
2025-07-03 16:10:17
These are kind of sloppy, but the dimensions are close enough to get the job done. Honestly wouldn't buy again though.
Dennis H.
2025-05-16 12:41:17
Working great
CJack
2025-04-19 14:51:55
I bought a used drill press at garage sale--good price but no chuck key. I figured this set of chuck keys would have something that would fit because none of the random keys we had lying around our workshop fit very well. I was pleased to find a perfect fit! With 8 distinct sizes, one of these is bound to fit your device.
Ken Young
2025-03-25 20:42:55
Out of all the sizes , none fit my Makita hammer drill. I put the largest one on my metal lathe and turn on off the cheucks down so it would fit, only too discover they are coated with a heavy layer of paint, apparently to cover up poor casting and no machining. I got it functional for my drill but not every one has a metal lathe.
Jeremy
2025-03-13 17:41:58
Metal is not hardened, it's too soft and the terth just keep breaking off. They have a heavy layer of paint that just peels off.
Juan Jose Pena Villa
2024-11-19 21:39:56
La llave cumple con sus medidas, sin embargo esta hecha de un metal muy suave. Cuando lo usamos en un mandril inmediatamente presento deformaciones en los dientes y perdida de la pintura de recubrimiento.
Recommended Products