Shopping Cart

Your cart is empty.

Your cart is empty.

Electric Wall Grooving Cutting Machine Chaser 110V for Slotting Brick Granite Marble Concrete Grooves With 5Pcs 5Inch 133mm Diameter Saw Blades Dustproof and Line Infrared Sighting

Free shipping on orders over $29.99

$186.99

$ 90 .99 $90.99

In Stock

About this item

  • 【RAPID PROTOTYPING NO DEAD CORNERS】Fast automatic grooving wall tank,suitable for quick and clean cutting of wall chases . Used for concrete pouring walls, black-hearted red bricks, cinder bricks and other super-hard walls.Maximum depth: 41 mm. Maximum width: 42 mm. Saw blade diameter: 133 mm.Saw blade inner hole diameter: 20mm.
  • 【ADJUSTABLE DEPTH and WIDTH 】 This wall groove cutting machine equipped with 2 handles, on can rotate 180° and the other can rotate 90°, to meet different work needs. Groove cutting depth can be set. An Angle of 90 degrees can also be cut.It is easy to install the saw blades(1 to 7pcs).There is an automatic lock button at the switch to prevent the machine from stopping when the switch is touched during use.
  • 【INFRARED DESIGN and MCVEABLE COVER】The electric wall cutter machine is designed with an infrared lighting and moveable cover. The infrared rays make positioning and cutting more accurate. The protective cover, which can block dust, is also moveable to achieve no dead angle slotting.
  • 【WATER PUMP FOR DUST-FREE ENVIRONMENT】There are two dust removal way of this wall slotting machine, water-wet dedusting and wing-absorb dedusting. This wall chaser comes with a water pump, using this pump when slotting, to atomize dust, protect health.
  • 【WIDE APPLICATION】 This Wall slotting machine can used for decoration and industrial wall/floor grooves. You can cut grooves in concrete, brick, marble



Product Description

110V Electric Wall Grooving

electric concrete saw

The handle of the tile saw can be rotated by 180°, and the direction can be adjusted according to needs, which is convenient, fast and flexible to use.

Grooving Cutting Machine

The cutting cover of the concrete cutting machine can be adjusted by 90° to realize right-angle cutting.

concrete cutter

The electric wall cutter is designed with infrared lighting and a removable cover. Infrared rays make positioning and cutting more accurate. The dust cover can also be moved to realize slotting without dead ends.

wall chaser

The electric concrete saw can flexibly adjust the slotting depth of 0-42mm, and it can be adjusted after loosening it.

wall chaser

The dust removal methods of the wall slotting machine include water wet dust removal and wing suction dust removal. This wall chaser is equipped with a water pump. Use this pump when slotting can atomize dust and protect your health.

concrete cutting machine

Different slotting directions are more convenient to hold the slotting machine, and the operation is labor-saving. The concrete cutting machine adopts a folding handle, which can be rotated and slotted.

Electric Wall Grooving Cutting Machine

1. Press and hold the switch to turn on the wall chaser.

chaser

2. Concrete cutter adopts the design of automatic lock button. After the machine is turned on, press the switch button with a hand and press the lock button with the other hand. The machine will lock the open state to prevent the switch from being touched when using the machine, so you can use it normally.

electric wall chaser

3. When turning off the concrete saw, press the switch button to turn off the machine.

Electric Wall Grooving Cutting Machine

Features:

  • 1. Magnesium alloy head shell, 4200W high power
  • 2. 360 ° slotted without dead ends
  • 3. Clean slotted, safe to use
  • 4. Slot width adjustable
  • 5. Light handle, easy to operate

Parameter:

  • Voltage: AC110V
  • Power: 4200W
  • Speed: 6500r/min
  • Maximum slot width: 42mm
  • Cutting depth: 41mm
  • 5pcs saw blade diameter: 133mm Saw blade
  • Net weight: 6.5kg
electric hand tools

What can you get?

1. wall slotting machine*1,hexagonal helper*1,manual*1

2. water pump*1

3. 133 mm saw blade*5

4. 3 m water pipe*1

5. vacuum cleaner adapter (Vacuum cleaner is not included )*1


Robert S.
2025-09-02 13:40:27
Was needing to install at my mother in laws kitchen island electrical. The house is on a slab so I had to slot the concrete to do the job. I ordered diamond blades if needed. I used the saw with the blades it came with. Never needed the diamond blades. The saw did an excellent job. I would highly recommend!
justcallmedan
2025-08-14 19:32:20
The water pump kept the dust to a minimum, so cleanup was easy with a shop vac. Instructions were written by a non-English speaker, but I figured it out. It cut a straight groove for my conduit to run to my new kitchen island. Money well spent. The rental company would have charged almost as much for a one day rental of a gasoline powered behemoth with a single blade, hence multiple grooves to lay a conduit. This machine, on the other hand had five parallel blades and made a meet groove in one pass. Laser guide. We’ll built. Heavy.
Customer
2025-08-13 16:37:33
I used this tool for a remodel and I needed to run 3/4 pvc electrical conduit in the floors. This tool is awesome and gets the job done with no dust! I would recommend using ear and eye protection while using the tool. Be prepared to spray out or use a wet shop vac to get rid of the excess water that is discharged from the pump. I placed the small water pump in a 5 gallon bucket and then just kept filling up the bucket when it would get low. Word of advice while using this tool, patients … it gets the job done, but slowly. Overall I am very happy with this tool.
Eric Rasmussen
2025-08-08 17:11:19
Did a good job and held up for eight 10-foot grooves in concrete slab. Draws a lot of power, you need a 20 amp circuit. Not fancy, but everything worked. My only criticism would be that the stated "41 mm" cutting depth is more than what we got, more like 35 mm at most.Totally disagree with the other reviewer who removed the water pump system after ten minutes. We found it makes a huge difference and works well (comes with an extra nozzle, which we didn't need) -- five blades working at once kicks up a lot of dust. No instructions, though (submerge the pump in a bucket).
Michael S. Cox
2025-08-07 12:31:27
I had a drainage problem with my driveway flooding my new barn, and I was looking for a way to divert the water away from the barn. Using this tool I was able to cut a 1" x1" (25x25mm) channel, about 57 ft (17.4m) across the concrete driveway, in about seven hours of work. I'm pretty happy with that, as I am fairly sure that any other solution would have been more expensive. The good: it came with minimal instructions, tubing and pump for water cooling, and (unexpectedly) a set of 5 blades! The bad: it came with minimal instructions, required a lot of force to cut through the concrete, and there was no provision to vary the depth of the cut at all. The shoe on the bottom does not adjust to make shallower cuts. It will tend to wander as it cuts, so you need to fashion a guide fence. I used a 2x8 board with a lot of weight on top of it. I powered it on its own 20A breaker, which it popped twice under heavy load. That may sound like a lot of criticism, but it was a hard job, and it performed. All in all, I am pretty happy with the results, and it's a pretty good tool.
Jose Diaz
2025-07-21 13:50:46
Heavy duty, great work
Nathan Barnes
2025-07-20 17:10:26
The tool was strong enough to cut approximately 300 8’ long recesses at its first job. These openings were perfect for a 2x4 stud to be installed. We saved a lot of time and money with this tool, allowing us to frame and install drywall over heavily uneven mortared areas. I will say that the water sprayer that comes with the saw makes more of a mess than is helpful. We only used it for about 10 minutes before throwing the line and water pump away. I would strongly advise the use of a full face respirator during operation.
Steve
2025-07-17 16:50:40
You can only cut at the depth the saw is at. No adjustments can be made.
ERIK CASTILLO MAGAÑA
2025-07-03 14:08:37
Muy fácil de usar y resuelve mis problemas 10/10 recomendable
Saico
2025-06-22 13:11:40
Este equipo es lo que esperaba, no te engañan con las dimensiones, eso es lo que más me ha preocupado de un producto, sin buenas dimensiones no hay buena utilidad.
elias s.
2025-06-03 17:21:49
 
MARIO FRANCISCO FLOTA GORIA
2024-12-18 15:25:04
MUY PESADA, AVANCE LENTO, RUIDOSA
Ruth
2024-11-14 16:37:19
Llegó rota la caja de plástico donde venía y al conectar y seguir instrucciones no sirvió.
Recommended Products