Your cart is empty.
Your cart is empty.ENERGY SUSPN Energy Suspension 2.5111R 16mm Rear Sway Bar Set for Jeep
Nickel's
2025-08-19 16:29:27
Good kit. Pretty easy to install. The big bushings that use the brackets and bolt to the axle were already split and slipped onto the sway bar easily. The bushings that go into the sway bar connecting links took me a bit to figure out..I ended up using a big C-clamp and a couple blocks of wood as a makeshift press, and they popped right in. Make sure everything stays centered though, or they will pop right out! And perhaps right towards you! Seems you cannot distort or misshape the urethane bushings...when pressing them in they will look like they are getting smashed beyond recognition, and they go right back to their normal shape when the pressure is off.
H&H Custom Fab
2025-07-20 12:55:41
I love these bushing. Easy to install. Fast shipping, great quality, no fabbing, or cutting involved. I will buy more for the other parts of the jeep. THANKS!
Michael D.
2025-05-31 17:13:51
I bought these mainly to replace the factory sway bar end links on my 2002 Wrangler X due to them clunking around every time I went over a speed bump. The actual sway bar bushings are super easy to install if you use an appropriate amount of grease, which is supplies in the packaging. The end link bushings are NOT the kind with the metal inserts that go through the middle. DO NOT waste your time on those as the bolts that go through them are tapered and will not fit snugly, causing a horrible clunking sound. To get the bushings inside the end links, you will have to cut the bushings in half and push them through on either side. Why they didn't just use a two-piece design is beyond me, but hey it is a quick 5 minute fix with a hack saw. I have already recommended these to a few Jeep buddies of mine, and I wouldn't have a second thought in purchasing them if I needed to.
AK Don
2025-03-20 17:43:41
Good, solid items, but the only way the link end bushing can be installed is to slice them in two. Probably won't make any different in the long run, but why not make them that way in the first place?
Jerry
2025-03-12 18:08:08
Fit perfectly. You need to press the bushings in the stabilizing bars.
Shane Posey
2025-03-06 14:01:28
I liked the product.
Scott McKendry
2025-02-25 16:26:21
Difficult to press bushings into sway bar but once installed the rattling noise from the loose rear sway bar stopped and Jeep definitely corners better on the road. Good thing I have a press. A vice would probably work too. I started with my vice but bushing kept popping out.
handfree
2025-02-07 16:04:17
bought front and rear for a jeep tj they seem to be a little loose but i guess thats how they fit time will tell on wear
Recommended Products
$20.95
$ 10 .99 $10.99