Your cart is empty.
Your cart is empty.For over 30 years, Energy Suspension continues to be the World leader in performance polyurethane suspension technology. Dedication to manufacturing and developing superior products has established Energy Suspension as the most asked-for name in performance polyurethane components today.
RH
2025-09-06 21:00:59
Installed on my 2011 GT convertible. All bushings fit nice and tight. Please be aware though, this isn’t a beginner project. Pro tip... To install the large bushings in the end links, temporarily install a hose clamp around the end of the link. This prevents the poly bushing squeezing out around and will guide it in. To be successful at doing this job you will need a lift, a good bench vise, a hydraulic press, at least one helper. You may also need an induction heater and an air hammer to get the top bolts out of the end links. If they’re seized, this is the only way you will get them out. I promise you this kit works 100%, but you do need to be fairly experienced and have a decently equipped shop to make it happen.
W. Jeff Bertrand
2025-08-11 11:38:32
The OEM rear sway bar bushings on my 2013 Mustang were squeaking like crazy. Installing these bushings totally solved it.
mj seyer
2025-07-20 13:37:10
Make sure you get the right bushings for your Mustang as there are different sizes of sway bars. All four bushings that go around the sway bar fit perfectly! BUT the bushing that fits around the link where it mounts to the chassis has a metal sleeve that is LOOSE. I did NOT end up replacing that bushing because of this. Product has enough lubricant included.
Edgar
2025-05-04 18:48:01
Stock Bushings failed at 55k miles and was getting a clunk sound. These were a good replacement and noise is gone. I had to get creative when pressing them on to the swaybar links because my vice was too small but they fir perfectly!
Client d'
2025-04-24 18:24:37
These bushings seem good at first view but make sure to measure your sway bar.They added a message now to try preventing you from buying the wrong one.. but these are 24mm and is not standard. It would say it will fit your car even if does not. For instance... on a 2013 GT convertible mustang you need 22mm... Ford does not provide any endlink bushings and couldn't find any online.. you have to buy the whole endlink for something like 25$ the unit ( not bad ).The grease in the package is good, the bushings are nice.Only issue is the size.... I destroyed my previous bushings and had to press theses one in.. I ended up buying all of it at ford for 120$.... what a waste of money.
Dale
2025-01-09 15:53:47
did not fit shaft, was very lose
Erin Smith
2025-01-06 13:12:07
Perfect fit for my 2012 mustang gt. Very durable. Love how they give you plenty of grease!
Tyler
2024-12-10 14:54:10
The bushing mounts and upper link mounts were the correct size, but the lower link mounts were not 24mm
Recommended Products
$24.55
$ 11 .99 $11.99