Shopping Cart

Your cart is empty.

Your cart is empty.

Epoxy Resin Kit 1Gallon, Clear Crystal Resina Epoxica Food Safe, Casting Resin for Art Craft, Jewelry Making, DIY

Free shipping on orders over $29.99

$29.99

$ 13 .99 $13.99

In Stock

1.Size:16oz


About this item

  • [Crystal Clear Resin]: Professional formula makes our epoxy resin reach food safe grade. After curing, the surface will be highly glossy and bring a more vivid lasting effect. It resists heat, scratches and yellowing, ideal for protecting your craft article.
  • [Bubble Free & Self Leveling]: Defoaming agent is added to release the residual air bubbles. The air bubbles of liquid resin will disappear within 2 hours, and the poured epoxy glue will be leveled automatically.
  • [Fast Curing]: 1 hour operating time, 8 hours of molding and 24 hours of full curing at room temperature. Friendly to both beginners and professionals, makes it easy to create amazing art project.
  • [Easy Mix 1:1 Ratio]: The epoxy resin kit contains the basic applicable tools and you can work according to the instructions. Just pour the clear resin A and fiberglass resin hardener B at 1:1 ratio, stir the mixture for at least 3 minutes then pour it onto the molds.
  • [Wide Applications]: Ideal for various DIY project: craft, coaster, wooden furniture, flower preservation, candle or soap molds, Jewelry making (earring, ring, necklace), etc.



Product Description

Bond Craftor Epoxy Resin
High quality
easy to use
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

Unleash Your Creativity!

Working Condition


Epoxy resin is sensitive to temperature, it is recommended to operate at room temperature (about 77°F).

If the temperature is too low, the defoaming ability will be reduced and the curing will be slow; (Please preheat the product before use when the temperature is too low in winter)

If the temperature is too high, the resin will solidify quickly, leading to deformation and cracking.

  • This Crystal epoxy resin itself does not have air bubbles, air bubbles are usually generated by mixing or pouring. The resin has good self defoaming properties, and it is easy to defoam for small and medium-sized items.

  • 1. Stir at an even speed, too fast will produce more bubbles.

    2. After mixing, let it stand for 5 minutes.

    3. Use a torch or heat gun remove bubbles.

    4. Large air bubble, use a pin or needle to get the air out.

  • 1. Mix resin A and B exactly at 1:1 volume ratio.

    2. Stir thoroughly to ensure that AB is fully mixed and there is no flocculent in the liquid after stirring.

    3. Too low temperature will affect the curing effect.

    4. Don't add too much color powder.

  • Our bottle caps are designed with a safety cap that needs to be gently pressed down before rotating, so that they can be better stored and avoided from being touched by children.


OPAGEEK
2025-08-20 14:12:36
Used this material for coating a golf ball return at a driving range and it worked perfect. Great price and the epoxy was set up in under18 hours so we could use the return. The self leveling properties also worked well and filled in the holes and crack on the return, such that the golf balls rolled like they were on ice. Suggest they you warm up the epoxy, after mixing for about 15 min in hot tap water. This gets the reaction going so that the material sets up a little faster.
Liz Daniels
2025-06-28 15:36:37
I'm a big fan of this resin. I cannot say anything negative about it. I do a lot of resin pouring, as I have an etsy store full of resin decor.The quality is great. The viscosity is perfect, the bubbles are minimal (I have noticed when you use the pump, you tend to have a reasonably larger amount of bubbles FYI)It cures pretty quickly, I use a resin heating mat and I can usually demold in about 4 to 6 hours. All of my creations have turned out beautiful with this product.Most resin fails are due to human error. Improper measuring, not mixing long enough, not letting the resin sit to degas...if you know how to do these 3 things properly then your resin should turn out fine. It's usually not the product itself that's bad, it's the people that don't know how to follow instructions on the product that make the product seem bad.
Shane Alldredge
2025-06-24 19:33:02
Great kit for beginners. Easy instructions, great results.
Customer
2025-06-23 11:51:40
This is by far my favorite resin. So easy to use cures beautifully. No smell and it doesn’t yellow.
Blackhat73v
2025-05-14 09:10:06
Product arrived in good condition but all 4 mixing cups were cracked/unusable. Packaging needs to protect cups better.Resin mixed well and set up as expected.
Placeholder
2025-04-26 11:51:09
Came out crystal clear and level, handle within a day and a bit. Followed the instructions, unbeatable price also. Used it to cover 3/4in newly fabricated oak plywood bathroom and cabinet doors on Casita camper. Old MDF doors all blown. Pleased.. recommend. Multiple gloves.. mixing containers spatula's and spreaders included.
Customer
2025-03-29 11:09:45
I've made 3 projects with this brand and had to throw out all 3, It wont get hard. I mixed it for over 5 minutes made sure it was measured right and still wont harden.
Samuel Siegel
2025-01-29 15:18:01
Mixing cups received broken, everything else in the package was fine. Not sure if manufacturers fault or someone dropped it when shipping.
Recommended Products