Your cart is empty.
Your cart is empty.Product Description
SIZE
Spanner Wrench:
- Length: 11.5in/ 29.2cm;
- Arms Opening Width: 0.75in/ 1.9cm - 4.3in/ 11cm;
Pins:
- 0.35 inch/ 9mm on the large side;
- 0.28 inch/ 7mm on the small side.
Material
Our spanner wrench is made of high-quality iron, which is not easy to bend.
Manufacturing
With good manufacturing, fine workmanship and in reliable quality, it is durable and strong.
Wide Applications
Adjustable Screw and two sizes of pin on either side make this spanner wrench suitable for different distances between slots and different sizes of slots.
How to use?
Adjust the arms to a suitable distance through the screw, then insert pins into the corresponding slots.
What does it work for?
Used to fix, install, disassemble, screw and unscrew any accessories or part on a vehicle in the proper size.
Fit any bike, motorbike, moped and scooter.
Great for scooter clutch, trim cylinder, motorcycle flywheel, hydraulic gland, transmission gear, variator, hub, etc.
Is this useful?
Of course. With one spanner wrench, repair will become much easier! You can say goodbye to a pair pliers and free your two hands!
Will the spanner wrench rust after use?
Our spanner wrench is made of solid iron instead of stainless steel, because stainless steel is less strong and easy to bend, which cannot bear strong forces.
Iron performs better under extreme pressure.
Our spanner wrench will not rust if you put it in a dry place after use.
Will the spanner wrench wobble in use?
No. All the parts of our spanner wrench are made of solid iron and strongly connected.
Perfet Quality
Every piece of product has been carefully checked before packaging.
Jlo
September 7, 2025
The pins were the right size but too large for my hydraulic cylinder. I used some screws, nuts and washers and made a work around. Nice tool seems well made.
Dakota Caler
September 7, 2025
A little combersom using this to remove the clutch fan from my 4.7L Dodge V8 but I eventually got it in to hold the pulley. The larger pegs on the opposite side of the arms are what made the clearance tight but otherwise once it was in it was cake. The tool is very sturdy and seems to at least be able to easily take 95 ft/lbs of torque without any issues.
Customer
July 19, 2025
Worked just as I hoped! It was the right size and sturdy enough to hold .. for me to break loose the fan bolt!!! Fits right in those two holes on the water pump pulley!
David
July 17, 2025
Just be aware that one can't use it to lock a variator on a 50cc setup because, unlike the 150cc, it does not have places to insert the "prongs" on the face of the variator. It worked perfectly on the clutch, though. I'm not getting the comments where people say the tool seems flimsy. Other than making it out of titanium I'm not sure how they could have made it stronger. Simple, sturdy, inexpensive, works as described, and was delivered quickly. Option B, which includes a flywheel removal tool, is an even better bargain for very little added cost. Very pleased.
Paul
July 5, 2025
I like the way those two ends I have this tool chest, lock into the clutch and hold it I was doing all kinds of crazy crap trying to hold that variator down before I started using this tool (wish I would have invented it) really works well removing the clutch and in the barrier. Also, they don’t rise. Yeah, do you write that it’s very reasonably priced for what it does.
LoriC
July 2, 2025
This tool is a great idea ... but too cheaply made to be of use. Fit of the fork and blade is loose, allowing too much twisting of the pins, causing the pins to flex and slip out under any force. Material is steel, but unhardened mild steel. Very soft and malleable, thankfully, because it will require straightening after the first use.If your application has deep holes for the pins to engage and prevent their twisting, this might be of use.This tool performed poorly for the removal of an auto air conditioning compressor clutch.
David Rodriguez
June 27, 2025
Exactly what I was looking for. Tools are of good quality and worked perfectly for the task at hand.
Randy H.
May 29, 2025
Ordered this tool to hold a cam gear on a Honda motorcycle so I could torque the cam bolt to 20ft lbs.Couldn't get it to fit right because the pin is not even close to being straight!Seriously, why even bother making something if the tool is so bad it's not even useable?Yet another item I will be returning...
Jelly Bean
May 23, 2025
Wonderful
Marlonium
March 25, 2025
Solid hold on torquing the bolt on my secondary clutch to 44 lb/ft and my primary clutch to 74 lb/ft! When positioned correctly, it did not slip once. A must have for CVT clutch work.
Robert
March 16, 2025
Pins wrong size.
joe
February 26, 2025
Work great on my 06 Dodge Durango 4.7 water pump pully. love the long handle that give u great leverage for a one man job. Everything on the tool worked great not sure how anyone could give a bad review. GREAT TOOK AT AN AMAZING PRICE A++++
Richard Macdonald
February 4, 2025
Worked well to remove the fan clutch from a 2007 hemi.
Recommended Products
$23.99
$ 9 .99 $9.99