Your cart is empty.
Your cart is empty.The right winch is important, and so is the mount you use with it. The proper winch mount maximizes winch performance and safety, and seamlessly integrates your winch with your UTV. This Extreme Max winch mount fits select Honda Foreman and Rancher models (2014-present) - see fit chart in product images for complete information. Our winch mounts are designed for use with all ATV/UTV winches from 2000 lbs. to 3600 lbs. with the following mounting patterns: Standard 4-Hole (4.875" x 3.00") and Standard 2-Hole (3.10"). The mount features a powder coated steel construction for lasting performance and protection from rust and other damage. Designed for easy installation. Need a new winch? Check out the Extreme Max Bear Claw ATV/UTV Winch, available in 3100 lb. (5600.3072) and 3600 lb. (5600.3075) models. Extreme Max also offers compatible hawse and roller fairleads, as well as a complete line of ATV cables, ropes, hooks, and other accessories.
Dennis M.
2025-09-01 11:46:42
Winch is a HFT Badland 3500. With this size winch you cannot install the four bracket bolts first, They are last. You have to slip the bracket in the spot loose and then install the four winch bolts, especially the top two are very difficult, but doable. the bottom two are not that difficult, then you install the four plat/bracket bolts. NO room for play, but it does work for a HFT Badland 3500. The mounting package was short one bolt as the fourth bolt was a carriage bolt and could not be used in this application. Extreme Maxx sent a complete new package of mounting hardware asap. Great for them. I was no hurry to have it installed, Again, Extreme Maxx did come through. The bracket is very strong and heavy duty, Great bracket and it does work and fits on a 2024 Honda Rancher, with IRS, PS, and ESP
Jon
2025-08-28 17:36:39
I have a 2016 Honda rancher and paid someone to mount a winch in it. I later bought this 2018 rancher and decided to do it myself. Installation was really not difficult and this winch mount was a perfect fit for the rancher. Product is well made, and I anticipate no issues whatsoever.
Josh
2025-08-05 14:26:56
I’m only writing this because Amazon won’t let you review until you do
Jayden
2025-07-31 14:21:13
Works as it should, holds strong but will require patience, lots of it. Had to bend the bracket out some and fight it on but will fit a 2025 rancher and be perfectly strong
JBH
2025-06-24 16:13:12
Simple install, fit perfectly. You don’t need to pull the front bumper to install this bracket. You do need to pull the front bumper to install the winch onto this bracket. Honda design flaw, no room to slip a winch in without doing so.
John M Higgins
2025-05-25 12:42:27
Works great, easy to install.
tyler
2025-05-11 19:02:34
The media could not be loaded.
Esteban Peña
2025-05-03 17:04:57
I didn’t know if it would fit my ‘24 Honda rancher but it does, it’s a bit of a PITA but with a little patience and finesse it fits good, used a 2500# winch and it fits good, seems like good quality steel, picked up the quad from a tree after install, so it works as designed.
Customer
2025-04-01 11:21:08
Perfect mount, I use it on a Honda, with a Warn Winch 3500. All holes match. Easy to install
Kaden
2025-01-24 10:58:41
I used this plate on a 2024 Rancher. It seems to be a good, decent quality product. I'm happy with the gauge of the steel and hardware provided. The coating seems to of a decent quality and I'm not worried about the coating breaking down or the product rusting.Installing the plate can be tricky and somewhat counter-intuitive as it can seem that the holes don't line up, but if you install the upper bolts first and then install the bolts to the front rock guard of your ATV you shouldn't have any issues. I would recommend this product!
Dg
2025-01-13 11:06:26
Worked perfect for a champion wench off the shelf had to pre-install to fit but works good
Randy Foster
2025-01-02 16:43:48
Tried loose fit it twice but the back mounting holes would not line up . Complained to the supplier they said it was a fitment problem and that they never claimed it would fit new models . I suggested they remove the part in their wording that it fits 2014 to the present . Last time I checked it is presently 2024 . I took it into my shop and bent it at the fairlead holes to make it fit .
Bryan Pemberton
2024-12-20 19:05:43
Installed on my 2024 Honda Rubicon with a Kimpex 3500lb winch. Looks to be solidly constructed. It's much like a KFI mount.Be sure to tighten the bolts that hold the winch to the plate before fitting it into the bike. I left everything loose to have a bit of adjustment and center things up once it was installed, but there's not enough room to get a wrench above the plate and tighten the bolts once it's installed.The plate does need a small amount of prying to get the holes to line up to the mounting points on the bike. This was expected as I'm no stranger to aftermarket products.
Recommended Products
$55.99
$ 24 .99 $24.99