Your cart is empty.
Your cart is empty.Product Description
m summers
2025-08-11 13:57:56
Purchased it for the X-Bull 13.5 and it’s a little tight for the power cables. I worry about the long term use (rubbing), the winch fits into the mount but one of the wires is very tight against the left side. I could probably avoid this if I removed the handles. Don’t let my find deter you from this purchase because it’s solid and does it’s job well, so well that I just pulled my friend out of some mud and he was driving a semi with a flatbed attached. Bad ass if you ask me !!Ashley SummersSummerville SC
TheJollySkipper
2025-06-29 15:05:49
This is a great mount! We put a Stegodon 13k winch in it, and it's performed flawlesly.The handles on the side make is much easier to pick up, and walk off with it. I am thankful they are there!When I bought this, I also bought a weldable hitch receiver and I drilled pin holes in the other end, essentially making an adaptor so that we could slide it on this mount, and insert a shackle hitch into the other end. Now we can chain or tie it off, pretty much anywhere, or take the adaptor off and mount it in a reciever on a truck.About the most, we've winched so far is a 10k forklift, up a 40 degree incline onto an industrial carrier (tandem axle rollback). It's worked flawlessly. Great mount!
kevin mccoy
2025-05-09 13:37:34
Xbull winch mount for receiver hitch seems ok but you can tell it’s made in China!!
Earl sterling
2025-05-04 13:26:53
Makes the job so much easier when hooking the winch up and to carrying a 10,000 pound winch
DIR JPM
2025-04-21 15:23:38
This is a universal mount that fits the winch I purchased without using the side brackets. It did not come with any instructions however anyone with mechanical aptitude can quickly figure out the assembly.
AJ
2025-04-09 15:21:00
The media could not be loaded.
tmash1
2025-02-07 18:41:04
This is one well made unit. It did add some additional weight to the Badlands winch, it is definitely worth it. The pre-drilled bolt holes on the plate matched perfectly up to the 12000 Badlands winch and the double rollers that cause the cable to retrack evenly back onto the spool also had pre-drilled holes that matched, as well as, the bolts and nuts to go with it. All in all this is an excellent choice to secure the winch in place for dragging something. Be advised that your 2" receiver hitch needs to be capable of handling 6 tons or you may not have a good day.
Kenneth G.
2025-01-28 15:24:14
Box came short parts. Contacted customer support with response within 24 hours and replacement parts confirmed FedEx shipment within another 24 hours. Highly recommend this part, price and customer support. ðŸ‘
Recommended Products