Your cart is empty.
Your cart is empty.Product Description
The Monkey Autosports Factory Style Fenders are made to an OEM fit for the Chevrolet Silverado years 2007 to 2013. With clean cut finishes, these fenders do not need any additional modifications to ensure a clean fit.
The fenders are made with lightweight yet extremely durable plastic. It can withstand the most harsh conditions are is designed to be installed as is or can be painted to your preferred color. Rest assured that you are getting the highest quality parts for your truck!
Instructions included. Our full 4 piece set includes the front and back fenders and everything needed for a quick and simple installation. Add style while protecting the sides of your vehicle from road debris and other outdoor elements.
Andrew Eccles
August 23, 2025
Fantastic product and great fit. I purposely installed these during the summer for the heat, so the adhesive would bond to the truck even better. I pointed the truck side I was working on at the time, towards the sun to heat the surface up. The double sided tape will definitely not be coming off anytime soon. I did use my heat gun to mold the bond even better in some places.I was very happy with the product from the start. Easy directions to follow, and simple installation. I have a 2010 Silverado, and these flares look great on my truck. Patience is definitely required, as readjusting is needed when fitting. If you can change a flat tire, you can easily install these flares to your ride. It took about 30-45 minutes per flare to install-so take your time. I first installed and tightened all the hardware first, then pulled the double-sided tape backing off. Throw away the white plastic fittings. Instead just drill a hole and use a screw on each side where the white fitting was supposed to go. The white plastic fitting does not fit well in the oval holes in the wheel well.Definitely worth the money, great look with or without paint/Line-X.
LOUIS ROTHER
August 20, 2025
I bought these fender flares to cover up some rust over the rear wheels and I had them installed today by Trick Trucks. I was just a little worried that I might not do a good job but they did a great job and they look awesome. I recommend you trying these.
TZ
August 17, 2025
Their QC fail?Or my incorrect assumption?Quality and fit "seem" good. Was expecting a fairly easy installation.Wrong. No holes were drilled in the flairs at all. Now I'm looking at having the installation done for me.No jackstands to raise the truck. At age 66 I'm no invalid. But working kneeling or bent over for even a fairly short period is not happening.It's what I get for abusing my body years ago.Update. After life getting in the way of having fun. Repeatedly.Was planning on getting these mounted.Double checked packaging more closely only to find no hardware had been included.Contacted the seller, who promptly replied asking for my shipping address inorder to correct the oversight.2 thumbs up.If, things go as planned. I will return to post once flares are mounted. Post pics, weather permitting as winter is nearing here.
Tyler Wheatley
August 1, 2025
I was worried about buying these type of fender flares due to a lot of negative reviews and many options. I’m glad I bought these. The fit was very good. Better than I expected. I applied them during the summer and the tape stuck excellent. The only negative was many of the hole marks they give you to pre drill do not line up. I ended up marking and drilling them myself. The rear I just drilled the s of tapper screws through the flares and the fender lip at the same time where I felt appropriate. I then released the adhesive tape while a helper gently pulled the edge of the flare away from the truck as I went along. Worked out great
M. Turner
July 14, 2025
Bought these to hide the bed rust that’s common on this body style of GM pickup. Straightforward to install, all hardware was included. Front flares used stock hardware mounting points. Design matches other OEM trim very well.Other reviews have mentioned the adhesive pulling back - have only had them for a month, but they are flush & secure so far.Might paint the rear inner fender flat black to match the front & flares. Otherwise like the black contrast with the white truck.Would buy again.
Customer
July 7, 2025
Had rust removed and repaired, then added the fenders for protection.
David Knuth
June 8, 2025
These flares are a great value, and do a great job covering over areas where my old truck has started to rust out on the bed fenders. They align okay for the most part, but I found on my 09 the very bottom is a bit long and doesn't quite wrap in with the body, requiring a heat gun and some modification.The tape included is also useless, so you definitely need to invest in the 3M trim tape that actually holds.Also, I found it's better to use tape on the inside of the wheel well arch, then drill and use body screws to hold things solidly in place instead of just relying on the tape, then go back and use the tape on the edge of the upper side where it sits against the body to form a seal.Overall, I'm happy with them for what they are, and since they cover up the body rust that would cost me thousands to repair, they're definitely the better option.
Dan
June 1, 2025
I had a price break during shipping, didn't know it till after the amazon return date. Contracted monkey autosports. And they said there is no problem at all sending the new part. Got this response within 12 hours of asking. Best customer service on Amazon. Should have slowed down before posting anything yesterday. They deserve a better review than I can think of writing. The parts fit well and appears it will be a very easy install. The front ones use existing screw holes already on the truck, the rear comes with clips that go in the existing holes as well. Good product
Taylor
May 4, 2025
Didn't bother with the supplied instructions. There is a great step by step video on YouTube. Just searched the product name. Very happy.
Customer
March 29, 2025
Je n’est pas utilisé la quincaillerie qu’il fournissait, j’ai utilisé des vis autovisseuses pour les installer. Il n’avait pas collants 3M de fourni avec le kit d’installation et j’ai dû en acheter pour aider à coller le rubber. Les instructions ne sont pas facile. J’aime le look qu’ils donnent sur les ailes de mon camion silverado 2007. Le devant est facile à installer, vous prenez les mêmes trous de compagnie, mais pour l’arrière ça va mieux lorsque vous êtes deux!! Je recommande!!
michel lamontagne
February 23, 2025
Bon produit . S adapté bien à mon camion
John Styles
February 12, 2025
Bumper flares were simple to install on my 2013 Chevy Silverado(6’6†bed). The fit was great for the price point. The covered a bit of the logo on the bed but not enough to be an issue.
Frank
January 1, 2025
Cheap Chinese parts save your money don't fit well and look cheap and seller lies
Recommended Products