Your cart is empty.
Your cart is empty.Product Description
Thickened shell
Thickness 1.1mm.
It can resist the impact of coarse sand and gravel and can adapt to various harsh environments.
2 brackets
2 spring steel supports
Compared with only one iron bracket,it has good shock absorption and fixing strength
Handle length:3.2 ", screw hole of 0.34in
Copper nickel plated
Pure copper nickel-plated plug.
Will not rust, and have better power performance.
Automatic gluing
Automatic gluing is more uniform and more beautiful than manual gluing.
D. Boehning
August 14, 2025
I put this in my track car when I installed an aftermarket quick-release racing wheel. I had no interest in tapping into the wiring harness for the wheel horn, so this was a perfect compromise. It even came with clear instructions. Beep beep!
Dave
July 19, 2025
It beeps, enough said
Gerry
July 17, 2025
One contact wire goes to hot (battery) another goes to horn. Most often they are not next to each other. I had to remove a wire from shielding to connect to horn. Then add a length of wire to connect horn to negative on battery (no body ground available). A lot of extra work. The included connectors are handy but pigtails are too short.Unless you can hook up button light to ignition switch just cut them off. Unless you want a constant drain on your battery.The horn itself is pretty heavy duty and loud enough to make my atv street legal. There appears to be a little volume control or tuner screw on the back.
Nathan Foulds
June 29, 2025
Put this on my Cub Cadet Lawn tractor. Mounted to the rear where the battery is housed for ease of installation. Sounds a little tiny but 100% for the price paid. The switch lights up so it is always on since I hard-wired it to the battery. It'll need a disconnect switch for winter storage. Overall, very happy.
Charles S. Hobson
June 21, 2025
Loud and easy to install on DT250
SR
June 16, 2025
Not as loud as stock horn. Then it stopped working after 5 months.
Lou
March 26, 2025
When you're riding a motorcycle in constant traffic, you need the loudest horn you can find that will fit within the confines of the motorcycle. This horn fits the space requirement but I can yell louder than this horn can blast.
Brett Odgers
January 18, 2025
Great horn for my old red kz1100
Eric
December 28, 2024
Good quality and value . Needs better installation instructions or you tube link
Recommended Products