Your cart is empty.
Your cart is empty.Whether replacing a worn switch or just adding tonal variety to your favorite instrument, Fender offers high quality switches with knobs and mounting hardware.
Mike T
2025-09-06 20:46:15
This a 4 pole, 5 throw switch, with 24 contacts total. It supports a lot more switching options than a standard 5 way strat switch. Most folks shopping for this switch are probably following a wiring diagram. But for those like me who like to design their own switching schemes, just be aware that the standard 5 way switch has a unique feature not found on this switch. The strat standard 5 way switch is actually a 2 pole, 3 throw switch, but with 5 positions. The "extra" positions (2 and 4) connect each pole to two throws at same time. Ie. you can get bridge and middle; or middle and neck. My point is that a super switch doesn't work that way, it has 5 positions, and each one is a separate throw. So you have to think about it differently. With all that said, there are some great wiring diagrams out there for this switch, and this being a genuine Fender means it will fit, operates smoothly and should be reliable over time. I had fun wiring up my strat for stock versus series wiring. Pro tip, use multi-colored wires! 24 contacts is a lot to deal with, don't make it harder by using all one color wire.
MusicoMan
2025-09-05 11:59:21
I used this switch to mod a low end Tele to Nashville pickup wiring (with some routing and a middle pickup, naturally). I didn't want a toggle, so I used this switch for the following wiring: 1-bridge, 2-bridge/middle, 3-bridge/neck, 4-neck/middle, 5-neck. This switch makes this configuration possible, but this is a dual wafer switch and that configuration only needs a single wafer, so this switch's second wafer makes it very wide, and it was difficult to fit in the Tele's cavity.This switch will, however, do this job well. The action is smooth, with good connection, and lots of possibilities beyond the Nashville wiring I used it for. Be aware of potential clearance issues, but this is a quality product that I will buy again to keep in my parts box.
Artbeat
2025-07-12 09:19:20
Good quality part, easy to install on my guitar. Turned my Tele into a tone machine with the new out of phase and parallel pickup settings...Best Mod I've ever did to one of my guitars!
Dennis
2025-07-10 10:15:46
If you have a Fender electric guitar (meaning a guitar that is fitted with a 3- or 5-way PU selector switch that looks like this switch), this should hold enormous appeal to you. I build a Telecaster or Stratocaster for fun every now and then, and I have come to keeping one of these on hand either for my building or to help my friends upgrade their Fender guitars.If you do not know why a "4-pole 5-way" is so useful look to Seymour Duncan's and Stewart McDonald's sites; there are many more, too. These sites will explain the versatility that is within your reach with this switch.If you can read simple schematics go to DBG Studio for Guitar Players and Builders' site; you will find the mother lode of guitar wiring schematics. It will take a while to figure out how the schematics work at DBG, but the enormous versatility this switch offers in irresistible and should propel you to `get it.' Just use the index for "4-pole 5-way" and check it out. In and out of phase, add a capacitor for different tones, parallel or series, coil taps, are all no problem with this.And if you want, you can swap out your 500k volume or tone pot with a 500k push/pull pot to get 10 PU options - or you can just drill a hole in your pickguard and put in a mini-toggle switch to get the same advantages. But I like to just use a push/pull pot because the guitar has that `stock' look but has 10 PU options. Wow!Assuming that you can solder (or learn to, it is not hard) you can have enormous fun with this switch.
Mustafa AlDhaheri
2025-05-11 15:59:03
The good- good Value- built very well- can achieve a lot of switching wiringsThe not good- bulky- movement not smooth- included only (White Strat and Black Tele knobs)I haven’t tested it for a long time yet
Andy M,
2025-04-27 14:26:35
I used this on a two-humbucker guitar to get the following combinations:1. Bridge humbucker2. Bridge split - inner coil3. Bridge and neck both split - outer coils4. Neck split - outer coil5. Neck humbuckerI'm pretty happy with this setup. I suppose there are likely other ways to get this, but I am not a fan of push-pull pots or extra switches. Those are too easy to hit by accident. This rig works well. Along with a change of the pickups, it turned a muddy sounding guitar into a super versatile one. I would do it again!
J.C.
2025-04-01 16:46:00
Great switch. It allowed me to wire an HSS guitar with Tele/Strat options.
Maggie5
2025-03-29 13:32:53
Glad to find this(even if they are a little pricey..)great product!
Wojciech Blazejewski
2025-02-19 20:53:23
Ok.Bra.
Johannes Hummel
2025-02-16 13:57:43
Vielseitiger Schalter
Fran
2025-02-09 15:58:05
Super switch de Fender.Hace su función.Calidad de materiales aunque el paso del selector entre posiciones y su fijación en las diversas posiciones no es tan bueno como el de un selector made in USA
Mark Walker
2025-01-30 11:15:17
Works wonderful adds many more tones..
Ale_e_Franci
2025-01-21 11:36:00
Serve per collegare i pickup delle chitarre in svariati modi , questa versione fender chiamta comunemente "superswitch" presenta molti più collegamenti del normale in modo da aumentare la possibilità di scelta di configurazione dei microfoni chitarra.âž–âž–âž–âž–âž–âž–âž–âž–âž–ðŸLe possibilità totali resteranno sempre 5 ma la scelta tra queste configurazioni con altri switch è parecchio più limitata ( pickup 1 e 2 in serie e terzo ion parallelo , tutti in serie , tutti in parallelo , uno in controfase e altri due in serie ...etc etc etc )
Recommended Products
