Your cart is empty.
Your cart is empty.
Product Features: 1.Connetor A:Firewire IEEE 1394 6 Pin Female.
2.Connector B:USB Type A Male.
3.Solved the problem of no FireWire port on the computer. Connect FireWire to the peripheral device and this adapter, and then plug the adapter into the USB input port of the computer.
4.Compatible with USB 1.1 and 2.0.
5.Plug and play.
6.No software is required.
7.NOTE:After the 1394 interface is converted to a usb port, it will affect the voltage and current of the camera and the camera.If the computer does not respond, the computer has to check whether the camera driver.
Package:2 x Firewire IEEE 1394 6 Pin Female to USB Male Adaptor Convertor
Roy Feague
2025-08-06 10:46:00
Doesn't work all. Simple task: plug my old external firewire hard drive into a modern Windows PC with USB. Tried multiple drives, multiple PCs. Nothing. The PC will not see the hard drive. The USB and Firewire standards are (unsurprisingly) apparently different in more ways than just routing a few wires between these two different plug shapes!
ECinLA
2025-07-15 18:45:10
This worked only to the extent that I was able to plug an IEEE 1394 cable into one end and put the other into a USB port. Otherwise, these were completely worthless junk.
A. Aiuto
2024-12-12 15:21:55
I hoped to use this to feed firewire output from an old video recorder into a USB port. It did not work on either a Mac or a Linux machine. Each machine saw a new USB device, but not one with any video capability.
Ken
2024-11-25 10:07:21
USB and Firewire are not compatible standards. The inside of these adapters are nothing but glue and wires.
Recommended Products
