Your cart is empty.
Your cart is empty. 1.Gain more range of motion in front axle
2.Improve off-road performance and gain traction
3.Linch pins keeps pins secure while still allowing for fast disconnect
4.Kit contains 2 clevis pins, 2 licnh pins, and 4 washers
INSTALLATION:
1. With your parked on level ground, unbolt your factory swaybar link bolts using a Torx55 bit and a wrench. You may reuse the washer.
2. Replace the factory bolt with the supplied clevis pin. Make sure to place supplied washers on both sides of the pin for a tight fit. Insert linch pin in
appropriate hole to secure clevis pin. You may re-use the factory washer if the fit is loose or to adjust the cotter pin.
As with any home modification to a vehicle, use these supplies at your own risk. Pin head may wear down with regular use. Pins should be checked
regularly for wear and tear from use and should be replaced regularly if necessary.
L W
2025-09-04 15:01:34
I lost one of these so my sway bar was hanging loose on passenger side. It was make an unpleasant clunk every time I start moving. These go on without a hitch and fixed it.
ChriNoDa
2025-07-17 10:53:35
Fit fine. Doesn’t come loose. But the rattle is horrible. You start questioning if it’s somthing on the jeep. Then realize nope it’s the pin. Ugh
david
2025-07-05 15:02:48
The pins are to long so you have to add like 4 washers or more to keep tight on the swaybar link and the clips are junk one broke on me while driving..I have another set coming to me and will see if maybe I got Monday or Friday parts the first time
Jace
2025-04-26 13:31:26
Works as intended but it is a little shorter than I thought
Jd730
2025-04-20 17:33:19
Doesn’t fit. Needs an additional washer or two to make it a tight fit . It was rattling bad and not tight. There was a good eighth of an inch of a gap. So took it off for fear of it breaking.
Austin
2025-02-16 18:41:40
Great product! Easy to install! Fit perfect!
otter814
2024-12-28 13:27:36
I didn’t like the fit. It was too sloppy and would make to much noise and wreck bushings.
Brian R.
2024-11-24 18:01:37
Fell out shortly after install. Installed properly.
Recommended Products
