The media could not be loaded.

We bought two doors and easily worth every penny. Price point is perfect. Assembly is easy, takes time but not a brain buster. We thought about just buying wood from Home Depot and doing it ourselves and after using this kit, I am sooooo happy we went this route. The wood is a good thickness and it comes with all the hardware you will need. I do recommend have a good set of tools like a drill and hammer so make the process faster. We also bought the door floor rollers it suggest for 9.99 and those work great! Wood comes unfinished but the stain we got from the hardware store was not expensive. The doors are the perfect thickness and are heavy duty. Not flimsy at all. Size fits my door opening perfectly !

WOW oh wow..dont think anyone has left a detailed review so here is mine. First the door was super easy to put together. You will need glue to help hold pieces for you so not to allow for too much movement of slats. Also a long phillips or a long drill bit for drill when assembling door. As for inserting dowel pins using a hammer...cover with a cloth or another piece of wood to hammer in the dowels so you don't leave dents in the door. The boards on the outside are almost 2x4. The slats are not. They are about 1/2 inch thick...so your door isnt ALL 2 inches thick. Technically a 2x4 is not 2 inches thick either. Some of the boards in certain places would not take the stain. Bad spots in wood. Manufactures don't have much control over that though when boards are made. DO make sure if using glue you do not allow glue to seep onto exposed boards that you plan on staining. Use a wet paper towel to wipe off any exposed glue or stain will not cover it..if you are staining. I used a water based stain. First time to use this and it was AWESOME. No odor and easy clean up and the stain went on perfectly. I used Varathane ESPRESSO color. I have always been a Minwax girl but this water based stain with that brand has many choices in colors that I like. Plus I shop at Home Depot and that's what they carry. Its their brand. And it dries very fast and only took one coat.NOW the railing. SIGH. My first to do this so learn from me. I failed at it like 10 times. It was horrible. My measurements sucked.... A nightmare to say the least. I added the board which definitely gave it some support BUT..it also bumps the door out more and that I don't like. The holes in rail would not line up with studs so I felt I had no choice. I THINK that the manufactures of the railing should add more holes all the way across so that people can drill into a stud and have a hole available. The way it is now is very limited. The instructions on the railing was a little bit confusing for me so i think that's what messed me up.Now when I ordered this door and was waiting for it to arrive, I ripped off my old door framing cause it was in bad shape and I replaced the boards. I got another half inch out of the door. so instead 32, it is 32 1/2 in wide. NOT a big deal. I think they had it framed out and I framed it in more tight to stud to fit a door. ANYWAY with how the door sits, not close to framing due to overhead board holding rail..there is a gap...and I can see right around the side. Don't like that either. I now FEEL...I needed to get the 36 inch wide door to cover those open areas. So what I did, i added 2x3s to each side of the door to make it wider. It will be a tighter fit with 2x3s due to the length of the rail but it works. I know they will fit.The door rolls very smooth and quiet.The metal door guide for floor requires me to drill holes in floor. I am not going to do that. SO NOW, I am having to purchase a separate guide that will screw into the wall instead. I am not putting holes in my tile floor. Also it requires that gap in the bottom of the door..which is fine but..if I am adding boards to the sides, I do not have a table saw or router to cut it..so a floor guide to screw into wall works better for me.So you may want to consider that when installing. I hope this review will help others to know what to expect.IMO, this was difficult on installing railing so doubt I will ever install another barn door. ugh. it was too much for me.....but it looks nice.UPDATE on an added note AFTER install. I think shorter spacers for railing when using the board above would remedy my issue. Although I had now added 2x3s to each side, I still would like to see it fit more snug. So I will look into purchasing shorter ones. Also due to me having limited wall space where the door is parked when open..it now does block the doorway 5-6 inches. Somewhat of an issue but not big enough to change it. It looks GREAT though when the door is closed. Door trim and everything is covered so all you see is a door and a wall..no door trim. See added boards in image with door closed.

After making a bi-fold barn door from scratch (which was moderately difficult), I wanted an easier regular barn door for a different area. This door was EXACTLY what I needed. Superbly crafted and so easy to put together. I did glue the inner slats to lessen natural wood movement and stained one side with a light oak and whitewashed the back. Glides smoothly and I love the look. Thanks for your quality product.

These doors are amazing! We bought for our office and it looks so great. They slide perfectly, and they were easy to put together.

Went up easy, looks great! If you want it for a bathroom and want it locked, you’ll need to purchase your own hook. This one did not come with a slower mechanism when sliding your door shut so be careful closing your door. (especially with younger children)

Easy to put together. Worked as advertised. No issues whatsoever. Stained them and they are beautiful

I’m giving it a 3 rating. The screws for the “Z” shape don’t connect to the door because they’re too short. I do like the black handle. But it didn’t come with a lock for the inside. Had to Mickey Mouse it. It glides alright and does function. I’ve had it over a year and seems to be in good shape. I’d give it a 3.5 if I could. Ha!