Your cart is empty.
Your cart is empty.1
Republicop
August 7, 2025
This product was packaged very well and arrived with rivets and screws needed for insulation. You do need a plastic rivet tool in order to complete the installation.I did not need to use a drill. I pried up a little on the rivet and used a tool to cut the rivet off. Installing the new rivets was very easy using a plastic rivet installation tool which you can buy separately for 17 or $18.Each Fender Flare is labeled very clearly as front or rear and left and right. I started the installation with the center most rivet and worked my way towards each of the edges of the fender flare. I had to hold the flare in place while I inserted the rivet but once I did everything matched up really well. There's very little gap between the fender flare and the original fender. It does look very nice and seems to be very good quality plastic. It seems very secure. Overall I'm very happy with this product and I expected to last a long time.Time will tell however if the plastic is of good enough quality so as not to discolor rapidly over time faster than the fenders do. I suspect using the same product I would use on the fenders to protect the plastic should work.
Matthew Belanger
July 23, 2025
Was worried these might completely useless but was pleasatly surprised. Install was easy (with a plastic rivet tool) and the look ok. Helped me pass inspection...
RocklanderUSA
July 6, 2025
Perfect fit and looks OEM. Arrived well packaged. Easy install.
Joseph K.
June 17, 2025
Fit was good. Had to drill couple of holes but who can complain. Great quality. State safety check approved
Glenn D. Hughes
June 5, 2025
Plain and simple. You will have to drill.
ghr
May 30, 2025
They fit perfect on my Jeep Gladiator and gave it a slight additional protection to the fenders from mud and debris. Fairly easy installation. Strongly recommend it.
Banx
April 22, 2025
These fit perfectly on Gladiator Rubicon high fenders. The fender flare extensions have rivet holes that align exactly with the stock fender holes, hence no drilling. Many Gladiator owners buy 2 sets of OEM Wrangler XR Mopar fender flare extensions, and put a set of fronts on the rear. But… that method requires you to drill new holes in the Gladiator fenders, as the front holes don’t align with the rear fenders. These Amazon flares eliminate the need to drill. So glad I found these.
Nathan Tegtmeyer
March 18, 2025
Overall I was surprised by the quality of these, they are a lot more sturdy than I was expecting. They match the plastic of the fender pretty well, even the texture of the plastic matches. You can get away with using the supplied rivets, I just used a little wider (head) of a rivet for a little more security on the fender. In the end I’m very happy with these, and they took less than 30 min to install.
Yann Gaumond
March 8, 2025
I used another kind of push pins that do not require any tool and are flush with the extensions. Great product, easy installation
Knoit Aull
February 15, 2025
Looks great and we'll made.
Philippe Beaudin
February 3, 2025
Bon produit et ce pose facilement vraiment très satisfait du produit
Customer
January 1, 2025
Easy installation..make sure to use a rivet gun specifically for plastic rivets. Look great on vehicle and have optically reduced the sticking out of terrain tires
Robert Frew
December 13, 2024
They are strong and of good quality. But, they do not come with a rivet tool and I don't know how install them as my rivet tool does not work on these
Recommended Products
