Your cart is empty.
Your cart is empty.Product Description
Heavy Protection - The 1.2” (30mm) thickness buffer layer absorb any impact up to 330lb or 150kg;
Strong Adhesive & Reliable Retention - Reinforced by fiberglass mesh design and strong adhesive surface;
Non-tearing Adhesive Cover – Unique plastic-coated cover paper can be peeled off easily without tearing;
Waterproof Material - Great waterproof material provided by the special surface treatment;
Diamond Texture Design - The special textural surface can minimize the marks that scratches left on the surface.
Packaged Included:
4 x GWP04 Garage Wall Protector ( 11.8" x 3.9" x 1.2" or 300mm x 100mm x 30mm)
Instruction:
1. Please clean and dry the wall surface and remove any particles on it;
2. Peel approximate 4” or 10cm adhesive cover from one side and apply the protector on the wall.
3. Slowly peel the rest of the adhesive cover and apply the protector on the wall at the same time to make sure it is straight and no space between it.
4. Repeat the same steps above for the other side of your garage wall.
Notice before use:
· Please do not put under extremely high temperature or exposure to the sun for long;
· Please clean the wall surface and remove the dust or other particles and keep dry before sticking the strips to the wall;
· Protectors can be removed without leaving marks on the most of the surfaces (e.g. brick, tile, glass, or marble walls). But the removal on a brittle or lime wall pavement may need to do it with care because the adhesive is very strong.
Daniel T Bowman
2025-09-01 21:19:31
I put these in our garage behind a small parking space, where if a car hatch is opened, it would hit the railing. The cushions are very firm so they should protect the hatch well in case it gets opened, and the adhesive is strong, but not so strong that I’m very worried about damaging the railing if we carefully remove them for some reason. They’re pretty much perfect for this application and I’m no longer stressed about the car getting damaged.
KP
2025-08-30 12:12:45
Easy to install. Does what it is supposed to do.
Susan Zellman
2025-08-12 15:30:54
Adhered good to drywall in garage to protect car doors from banging into wall.
Customer
2025-07-31 18:20:42
once it's placed, we won't peel it off or it will take the dry wall paint with it
Leah S
2025-07-20 12:13:24
The protective pads are light weight and have a medium pad thickness with a soft but firm resistance to the weight of a car door swinging open. It looks like these will do well at protecting my doors and the wall.My biggest question was how to mount these to the wall because I didn’t want to risk drywall damage in the future with the large peel and stick backing.Tip: use 3M sticky strips! They barely increase the depth and will be easy to remove temporarily (or permanently) and just reattach as needed with the Velcro, no damage to drywall.
RJH
2025-06-14 13:48:06
Bought this to protect the door edge on my 1970 Cutlass against the shelves. It sticks well to the pressure treated wood and is a soft landing spot for the door. No paint damage.
rico
2025-06-05 13:29:38
used to prevent front of vehicle from hitting garage wall. combined with a tennis ball hanger, gives excellent protection of garage wall.
Peter
2025-05-17 12:07:25
The ones l ordered last time were bigger these are tiny. But the cushioning is good., ðŸ‘ðŸ‘ðŸ‘Good quality and value.They can be painted to match the colour of your car park walls /pillars.I ordered these before and they saved my car from worse damage when l turned too suddenly against a pillar.
July Caballero
2025-04-22 10:16:06
Muy buen producto... ayuda mucho a proteger las puertas del auto.
SOFFR Vaclav
2025-03-31 16:07:01
Super
Michel D.
2025-03-29 18:31:07
Très bon adhésif et revêtement. Peut-être un peu ferme
A.M
2025-02-14 14:51:12
Ottimo prodotto, viene anche rilavato dall'auto come segnale di pericolo, manovre al top, consiglio
Victor P.
2025-02-08 15:40:11
PROS: El adhesivo es bueno y el protector es resistente.
Recommended Products