Your cart is empty.
Your cart is empty.Product Description
Garage Smith GWP02S Garage Wall Protector's Features:
Heavy Protection - The 3/4” (20mm) thickness buffer layer absorb any impact up to 330lb or 150kg;
Strong Adhesive & Reliable Retention - Reinforced by fiberglass mesh design and strong adhesive surface;
Non-tearing Adhesive Cover – Unique plastic-coated cover paper can be peeled off easily without tearing;
Waterproof Material - Great waterproof provided by the special surface treatment;
Diamond Texture Design - The special textural surface can minimize the marks that scratches left on the surface.
Packaged Included:
2 x GWP02S Garage Wall Protector (15-3/4” x 6” x 3/4” or 400mm x 150mm x 20mm)
Little Details Make All the Difference.
Instruction:
1. Please clean and dry the wall surface and remove any particles on it;
2. Peel approximate 4” or 10cm adhesive cover from one side and apply the protector on the wall.
3. Slowly peel the rest of the adhesive cover and apply the protector on the wall at the same time to make sure it is straight and no space between it.
4. Repeat the same steps above for the other side of your garage wall.
Notice before use:
· Please do not put under extremely high temperature or exposure to the sun for long;
· Please clean the wall surface and remove the dust or other particles and keep dry before sticking the strips to the wall;
· Protectors can be removed without leaving marks on the most of the surfaces (e.g. brick, tile, glass, or marble walls). But the removal on a brittle or lime wall pavement may need to do it with care because the adhesive is very strong.
Artie
July 30, 2025
I can't get over how great these worked; I'm getting ready to buy at least 5 more packs. I was looking for a product to protect my car doors from being opened in the wood shelving and brick in my tightly spaced garage. I decided to buy a single pack of the wall protectors to see if they would work figuring worst case, I may be able to offset mount these 'bumpers' with screws. Absolutely no need for that; the glue backing on these pads are the strongest I've ever seen on anything. I first tried them against the wood shelving, basically an untreated 2x4 and it's not going anywhere. They cut easily to size/shape, are very think and substantive, and protect well from impact. I now have no fear of accidently letting loose of the door into the shelving. I have not tried these on the low brick wall on the other side but will write another review when I purchase for other side. But I tell you, this is industrial strength glue, if these don't stick, no product will.
ELI
July 3, 2025
It's easy to install—just ensure you position it correctly on the side of your garage. The adhesive is strong and holds well, so it stays in place. Make sure to align it properly to prevent your car door from hitting the wall. Overall, it’s a simple and effective solution, Highly recommended!
Cassie4ever
June 4, 2025
This product does stick, even on the roughest of walls. As long as you generally park in the same place, it will do a good job of protecting your doors. I just kind of wish we got the longer ones for only a few dollars more.
RonR.
May 31, 2025
I looked for a long time for such a product as this. When I finally purchased it, I did so by holding my nose. That's because the price seems to be FAAAAR more than is necessary for the company to produce, market, & deliver this product and get a reasonable profit. Yet, I did obtain it and am happy with it. It was quite easy to mount onto my garage wall and the sticky surface seems to be adhering well to the wall. I don't envision it peeling off of the wall anytime soon. Yes, I recommend this if you can get over the much-too-high-of-a-price you'll have to pay for it.
LESG
May 20, 2025
Easy to install and very thick providing good cushioning for avoiding door mars.
Customer
March 18, 2025
Easy install, serves the purpose well.
Gerald Polite
March 16, 2025
Protects wall and car doorsOnce you stick it it's stuck no redos
dongurao
March 12, 2025
It's thick enough and large enough to protect the door edge of my car. I attached one pad to the garage wall location where the front door contacts and the other for the back door. The adhesive felt strong so I hope they stay there through the summer heats.
AlexRM
March 4, 2025
fácil instalación y buena protección para las puertas del vehÃculo
Eduk8r4evr
March 3, 2025
This is an excellent product that provides superior bump protection for my car doors. The bumpers are easy to apply and stick well to drywall and concrete.
Anirban
February 25, 2025
Excellent product. Helps to save car door when your garage has a limited space.
aboreem
November 19, 2024
المادة اللاصقة غير قوية على الجدران المصبوغة
Tom D
November 15, 2024
I bought this product a few years ago now, to stick to my garage wall and protect the door of my car from knocking against the internal wall, which is made of breeze blocks.It was VERY easy to install, just peel back the film on the back and stick the product directly onto the wall. I would recommend brushing away any loose dust and cobwebs first.I bring my car out of the garage and put it back almost daily, and the thick foam has protected the door perfectly. A few years have passed, and the product remains firmly stuck to the breeze block wall, with no signs of it coming loose or peeling off.I hope that potential buyers find it helpful to have a review of how the product has fared after a few years of use. It's a simple, reliable, long lasting and effective product. Highly recommended.
Recommended Products