Your cart is empty.
Your cart is empty.Product Description
PCI Fixed Bracket
Graphics partner is fixed by PCI bracket.
Installed in chassis PCI location.
Keep the fan away from the slots and components of the motherboard
Personalized Fan Interface
2 fans combined into one interface, So, you only need to access one interface to run all the fans.
Can be connected to the motherboard's 3-pin or 4-pin interface, working at full speed.
But it is recommended to use one point four voltage line we sent together.
Choose the voltage that suits your needs.
Because different voltages with different airflow, speed, and noise.
Power D-type Interface
- Four interfaces, three voltages.
- Different voltages with different airflow, speed, and noise.
- you can select the appropriate voltage interface to start the fan.
- 5V interface: The fan will work at about 40% speed，small airflow, very quiet.
- 7V interface: The fan will work at about 60% speed，moderate airflow, relatively quiet.
- 12V interface: The fan will work at about 100% speed, Big airflow.
Metal Fan Grill
Protect Fan Blades.
Prevent wires or foreign objects touching the blades,
Causing interruption or obstruction.
Step One
Step Two
Step Three
Step Four
Bruce Richwine
2025-09-05 17:46:35
The fans work as advertised and they are quieter than I was expecting. I can’t comment on the longevity of the fans, but they seem quality enough to last. It’s definitely a good buy if you are using an HBA in your system and need additional cooling. Works really well for a home server build.
Matt
2025-08-16 13:14:39
This fan fit right into a slot and the 3-pin plug fit fine into a 4-pin fan plug on my motherboard (ASRock Taichi x399), and I am able to control the speed via my motherboard fan control utility. The fan is very quiet at full blast and almost silent at lower speeds, and moves good air. This is my work PC so I wanted it to be silent, and so I bought a graphics card that only has a passive heatsink, no fan. But when playing games it gets too hot to touch and slows down. So I bought this fan to try to keep the heat under control only during those times that I play games (very rarely). Wow what a big difference! After 20 minutes of game play the graphics card heatsink is barely warm, an enormous difference from the previous too hot to touch! So in short, this fan works as advertised. It includes a power adapter for the older style (round pin) power plugs used on older hard disks and some instructions for splicing it into an existing plug. I'm a little surprised that the adapter isn't for more modern SATA style power plugs. It includes a one page instruction sheet that tries to pack some good technical info into few words and not the clearest english ever, but I suspect in 99% of the cases the instructions aren't needed anyway as this will likely just plug right in to any modern motherboard with a free fan plug, or any PC power supply using the included adapter. So in short, it fits as advertised, plugs right in, is quiet, moves lots of air and works great with the motherboard built in fan controller if you have one, or plugs in with the included adapter if needed.
Sabrina
2025-08-13 10:56:25
It is "customizable" if you need to move the fans around or remove a fan or 2 but i did have to use my GPU sag bracket as there is only one screw holding the fans wish there was a white option to match my PC build but I'm happy
Mark
2025-08-11 14:10:45
It works well for the price but the rear bracket that holds it into the PCIe panel is flimsy but does work fine. The biggest issue is after only a month one of the fans developed a rough noise on start up but it slowly goes away after about a minute. Still completely usable just kind of annoying and worrying when if first started as I thought one of my main fans of water pump were going bad.
Rhodeseven
2025-07-30 13:15:12
I use it to cool a very hot hauppauge quadhd tv tuner. Did not have increase noise in pc case. TV tuner went from being alarmingly hot to the touch to being cool with fans being installed. Not as stable as I would have liked but considering that it is two fans attached to a piece metal mounted by a screw, I’m not surprised it has some “playâ€.Be warned: The Fans occupies two PCIE slots although it looks like it only covers one.Good value for the money.
Tickerguy
2025-07-29 16:56:14
Update: Replaced one (same brand and model) that failed after ~4 years. Well, the second one lasted SIX MONTHS and now the furthermost fan from the back of the case has the bearing going out and making a fair bit of noise. The quality has gone down the toilet -- four years is reasonable service for something like this in a server but six months is not; buy someone else's instead this is, sadly, junk.
If you have a PC or server chassis with PCI cards that have no fan on them and are running warmer than you'd like this is a good solution. This is the second one of these I've bought -- the first was good for about 4 years and got quite noisy, thus was replaced before failure. That's not terrible service life for what it is and its inexpensive.
Juventino Reyna
2025-06-30 11:54:01
I don't know why there are negative reviews. This thing is easy to install if you have extra system fan headers. There are no instructions needed if you're even considering buying this. You most likely know how to put together a pc. I used this and it brought my gpu temps down a whole 15 degrees. At idle if I want to, I can speed it up to 65% and it'll bring my gpu temps down a whole 20 degrees. In order to control my fan speed on this I used armoury crate since I have an Asus motherboard. For $16 or whatever you can't go wrong with running this. As for longevity if it lasts 6 months it'll be worth the money.
Matthew
2025-06-11 15:14:06
Noise: First thing I noticed after install was the whiny, whirry, plastic-on-plastic sound that only a cheap fan can make. (I'm used to Noctuas so there is a high bar for my preference.)Temperature: In a 25°C room, I tested the GPU temperature with the FurMark GPU stress test; idle temperatures dropped from 39°C to 34°C, and after 10 minutes of continuous stress testing these extra fans lowered workload temperatures from 72°C to 70°C. I connected the fans to the motherboard's case fans, so I'm sure better temperatures could be achieved if these were added to the GPU's fan connection instead.Takeaway: Not terrible for the price, does work, but noisy when GPU is idle. There are mounting kits you can buy that allow you to add your own fans (hopefully quieter ones than these) in a similar PCI slot fan mount fashion. Also there are aftermarket GPU coolers (Arctic Accelero and RAIJINTEK) if you're willing to replace your GPU's stock cooling system.
Mac
2024-12-28 13:33:40
You get $6 worth of components - $2 mounting PCI bracket made from soft bending metal and 2x$2 fans. The fans appear to be PWM and they don't work when connected to a PC motherboard or fan controller. I have not been able to find the datasheets and figure out what frequency they operate under, so I threw them away after about two hours of trying to get them work with arduino. The supplied molex adapters are useless because the fans don't have standard +12 V, GND and tach lines; they're 3-pins but they require PWM input at the right frequency. They're basically very old noisy fans. Save your money and get the mounting bits separately and get 92mm or 80mm fans.
Alfonso Jiménez Velazquez
2024-12-22 13:03:11
The media could not be loaded.
Mohammed Ibrahim
2024-12-04 09:32:14
Ø§Ù†ØµØ Ø¨Ù‡ بقوة Ùقط اللي دسك توب Ù…ÙØªÙˆØ Ù…Ù† الجانب (نازع الغطاء) ينزل Øرارة الكرت كثير مع تكيي٠الغرÙØ©.
Sergio Esperón GarcÃa
2024-11-21 09:10:42
El artÃculo es muy bueno, tiene varias entradas de alimentación con la que puede varias el rpm de los ventiladores y con eso pude bajar a mi tarjeta de video 20 grados en uso normal pero no en uso rudo, es decir, que en uso rudo de la GPU no se mostró una diferencia instalándose en 12v .
Rafael Pedrera
2024-11-17 14:23:05
Fácil de instalar, trae el adaptador para conectarlo a la fuente de la computadora. Ventiladores con buen flujo de aire. Logró bajar la temperatura en uso normal de mi compu de 52 grados a 39 grados, aclaro está temperatura es uso normal NO EN GAMING.
Recommended Products