Your cart is empty.
Your cart is empty.Genuine Honda part that fits your specific vehicle.
Shawn Edmonds
September 2, 2025
When your old Honda bolts are seized and have to be cut, these are the replacements! They fit great.
jerry fuentes
August 24, 2025
Bought this because strut mount bolt was seized up and head was starting to strip out from excessive impacting in attempt to remove. Bought this bolt since it looked very similar however it is listed as a flange bolt wich is a bit confusingBut will also work for strut mount bolt.Its the same thread, length and dimensions.
Mike
August 23, 2025
This is the exact same as the vertical bolts on the front a-arms of the 2006-2013 Suzuki SX4. The same markings and everything. Just be sure to put anti-sieze on this guy since it's mounted vertically and can drink up moisture into it.
Pablo Gonzalez
August 16, 2025
If you're planning to do Honda rear shocks in my case 2005 Honda crv I recommend this bolts because my were seized into the shock bushing but I cut them and replace with this and solve my problem and thanks to another customer I got the right nuts ( m14 x 1.5)
Michael
August 15, 2025
Fit just right in the honda element rear struts. Wish it came as a nut and bolt set as the nut from the old unit was not an easy fit but worked out well
Carrie Young
June 30, 2025
Good part
Ricardo
June 27, 2025
Used replace the rear lower shock bolts on my Element, I decided to cut them off since they were seized up, if you have to replace the nut also like I had to they're hard to find, checked all my local auto parts stores and no one carried it but you can pick them up at a dodge dealership they normally carry them in stock. The nut size is M14x1.50 and the Dodge part number for them is Part Number: 06104719AA, and they were about $6 bucks each if IRC.
CMB
June 14, 2025
Pain to remove seized bolt and 10 bucks for this is fair
Shawn Edmonds
May 28, 2025
When your old Honda bolts are seized and have to be cut, these are the replacements! They fit great.
jerry fuentes
April 21, 2025
Bought this because strut mount bolt was seized up and head was starting to strip out from excessive impacting in attempt to remove. Bought this bolt since it looked very similar however it is listed as a flange bolt wich is a bit confusingBut will also work for strut mount bolt.Its the same thread, length and dimensions.
Mike
April 20, 2025
This is the exact same as the vertical bolts on the front a-arms of the 2006-2013 Suzuki SX4. The same markings and everything. Just be sure to put anti-sieze on this guy since it's mounted vertically and can drink up moisture into it.
Pablo Gonzalez
April 3, 2025
If you're planning to do Honda rear shocks in my case 2005 Honda crv I recommend this bolts because my were seized into the shock bushing but I cut them and replace with this and solve my problem and thanks to another customer I got the right nuts ( m14 x 1.5)
Michael
January 28, 2025
Fit just right in the honda element rear struts. Wish it came as a nut and bolt set as the nut from the old unit was not an easy fit but worked out well
Carrie Young
January 12, 2025
Good part
Ricardo
January 1, 2025
Used replace the rear lower shock bolts on my Element, I decided to cut them off since they were seized up, if you have to replace the nut also like I had to they're hard to find, checked all my local auto parts stores and no one carried it but you can pick them up at a dodge dealership they normally carry them in stock. The nut size is M14x1.50 and the Dodge part number for them is Part Number: 06104719AA, and they were about $6 bucks each if IRC.
CMB
December 19, 2024
Pain to remove seized bolt and 10 bucks for this is fair
Recommended Products
$55.99
$ 24 .99 $24.99