Your cart is empty.
Your cart is empty.Class C weather, oil, and solvent resistant outer coating. Solid brass 1/4" NPT end fittings. Spiral synthetic yarn reinforcement. Max operating pressure: 250 PSI. Max burst pressure: 1070 PSI.
Timbo Slims
2025-09-03 11:12:43
I ordered both the 50 ft and 25 ft Goodyear Rubber Air Hose, and so far have been pleased with the quality of the hoses. I previously owned an Amflo PVC hose, so this definitely was an upgrade. The Amflo performed OK for a number of years, but once I saw the inevitable bubbles, it was time for a new one.To quell any confusion on what you will be receiving, my hose still says "Goodyear, Made in USA" on the hose. There has been a lot of reviews that state Continental bought out Goodyear air hose manufacturing, and this is true, so I was uncertain what I would get. In fact, you can buy the Continental version of the Goodyear hose here on Amazon also, and it states it is manufactured by Continental right in the title. I am not sure if these Goodyear hoses are remaining inventory, or if Goodyear is still making them, I was under the impression they no longer did. So realize at some point you may not be able to purchase the Goodyear branded version of this hose - keep that in mind if you are thinking of purchasing. I am not sure that it matters, but I took comfort in knowing I had the time tested Goodyear branded hose delivered.As far as the quality of the hose, I have used it a number of times and pleased with the way it handles and works. The hose will still kink if it is not under pressure, so keep that in mind when stretching it. You may have to turn the hose to avoid kinking, or get a swivel. When it is under pressure, it does not kink under normal use. I like how this hose lays flat compared to the cheaper quality PVC hose, it handles much better and is not such a pain to work with, as the PVC would "stand up" off the ground and pose more of a trip hazard.Note this hose does not come with any fittings, it has the standard 3/8 in male threaded connectors on each end. I read a review or two that expected to have a quick disconnect come with the hose, but it does not.Overall I am very pleased with these hoses, they are not cheap, but I am satisfied I have a high quality hose that will last a long time. If that changes and I have any issues, I will update the review.Recommended. Thanks for reading!
YaLonda Perkins
2025-08-21 13:59:07
This is a great hose and we love the easy on rolling it up in the cold weather.
Jason Busch
2025-08-17 17:36:41
Good quality and easy to install.
SPK
2025-06-19 14:26:11
I like this rubber hose. It works well on my Reelcraft retractable hose reel. Quality seems good, it doesn't kink or twist as easy as poly or coiled hoses and remains pliable in cool weather. Dust and dirt do adhere to it more easily than other material; but, that is insignificant relative to the overall characteristics of this rubber hose. It's also heavier than other hoses, which could be good or bad; but it works well for me.
Bill S
2025-06-09 12:14:24
Price is right for a long lasting hose. The fitting crimp is what went out on my last one after 5 years. Hose was fine.
Eric Solvesky
2025-05-31 15:23:30
Much better than stiff PVC. Soft, flexible, and rugged!
bryan k
2025-05-22 15:14:54
Real rubber! Doesn't get hard and tangle up like the other plastic type hoses when it gets cold. Vast improvement wish I had remembered to get one of this years ago!
Lumpy
2025-05-11 11:51:16
For SHOP air, this simple, plain Jane rubber hose is ideal. It's the heaviest of the three types (rubber, PVC, Polyurethane). It's also the most kink resistant. To kink it you have to force it into an unnatural bend. The other two types of hose seem to SEEK the bend and turn themselves into a kink.If your hose is on a reel, this is the ONLY kind of hose that will not frustrate you. Reinforced poly is "sticky" and PVC is "stiff and brittle". It's a battle to force those two into a reel. But rubber hose seeks to lay well in the reel.If you were using a hose for on board air in a truck, or for portable tools like nail guns, this kind of hose would be less practical than reinforced poly (heavier, more bulky). But for that big tank and reel in the shop, this simple hose is what I use. Replaced it once in 15 years. It tends to dry out and begin cracking after a decade or two of pretty modest home shop/man cave use.This is also a great source of stinger hoses. Buy a full length hose for nearly the cost of pre-made 10 ft stinger hoses. Cut your own to any length you like, install fittings, start moving' air. It'll make several stingers for about the cost of one that's pre-made.Once the hose eventually DOES die after 10-15 years, I use pieces of the old hose as wire protectors, panel pass-through protectors, whatever.Once in a while I read negative reviews about the hose and connector separating, bubbling, losing air etc. I've never seen any air hose not suffer stuff like that. Good grief, snip off the end and install a new fitting. Costs a dollar and 15 minutes. If a hose lasts 15 years and you need to replace a fitting twice, that seems pretty reasonable. I consider replacing hose ends every few years just normal maintenance. I consider replacing the hose every 10-15 years similar normal wear and tear.Thanks - Lumpy
Daniel
2025-04-25 17:31:42
Muy buen producto en precio y calidad. Muy bueno para uso en taller mecánico, soporta aceite y si le pasa un carro encima no pasa nada.
Dave McLean
2025-04-24 12:30:14
Made in USA. You get what you pay for. Durable and flexible
Bernard
2025-03-22 18:58:44
Well built. Flexible, doesn't kink. Happy so far. Time will tell....
César Briseño
2025-02-08 15:20:27
Llegó en muy buen estado, se percibe bien construida.
Customer
2025-01-28 11:46:04
It is very good price for quality of hose
Recommended Products
