Guy Gunderson
2025-07-11 17:46:33
Installed on a 2010 Tundra. Fit good and was easy to assemble. Be aware the nuts are 11mm and 28mm. Fits and looks amazing despite being skeptical of other reviews. No creases or dents, just nice, shiny, flat bends and ridges. Fit a 12 gauge and an ar15 snugly when I bent the flexible mounts around and snapped the Velcro. Velcro didn’t move it all and kept my guns in the same position for driving on my bumpy road. Already referred it to a few range buddies and would recommend it to others too.
ariel
2025-06-30 10:24:44
Very sturdy and wont rattle at all on pavements or decent off road trails, only problem i had with rattling is on these west texas oilfield lease roads (they are bad, and most people will never drive on anything near as bad). My first tip is to wrap the all thread rod with electrical tape to make it fit tightly in the square tubing, thats where i found my rattle was coming from. Second tip, i didn’t like the rack pushing down on my B pillar covers because it was deforming it a bit (thats how its supposed to stay in place) so i took off my pillar covers and added some self tapping scews where the rack was resting, i could tell from some rub marks on the pillar. So now my rack rests on the hex flats on the screws and i was able to tighten it even more than before without it ever contacting the plastics on the pillars. Keep in mind i only did this because on the nasty roads i drive on every day, miles and miles of nasty caliche roads. Most everybody will probably never hear any rattle from it, fyi the rack itself holds the guns snuggly and o have now had a problem with any guns shifting or coming loose
SAB
2025-06-21 12:15:39
This item was purchased for a 2004 Ram 2500 four door pickup.THIS RACK IS NOT INTENDED TO BE USED WITH LOADED FIREARMS!Tools needed: Two 1-1/8 wrenches or two adjustable wrenches capable of 1-1/8, two 7/16 wrenches, and something to hold the center with. I suggest locking pliers (vise grip).Quality of instructions: Adequate, giving simple enough directions for installation along with pictures to help understand what they are saying. Take the time to read them before installation.Product construction: The outer pieces, center threaded rod, and hardware are made out of steel. The square tubing and gun mounts are made out of aluminum. The gun mounts are lined with dense foam, secured by nylon straps with industrial Velcro.Installation: Easy. Can be accomplished by one person in less than ten minutes. A second person will make this easier.Post Installation: The gun mounts are somewhat bendable, allowing you to adjust how they fit around your firearm. Once properly installed, the rack is surprisingly sturdy. The rearward rack is positioned perfectly. The front rack sits a bit low if you are a tall person. Bend the Strap aluminum the gun mounts are attached to upward a little bit to fix this. On my vehicle, the locking nuts do rub on the dome light. a couple of pieces of soft side Velcro solved this problem for me.
Matt
2025-05-29 11:24:28
This thing is awesome! No drilling or holes in the headliner! Installed in about 5 minutes and to my surprise is extremely solid holding two fairly heavy rifles and bouncing down a thousand miles of rough roads every week. It held up all winter and taking it out took less than 2 minutes!
Crocket
2025-05-25 18:57:20
Love it! Holds rifles securely and they are easy to retrieve quickly if needed. My truck cab is more organized and the rifles don’t have the dog running over them! No worries doing heavy off-road in my Raptor; rifles stay put.
Gerald Patterson
2025-03-19 16:31:04
Easy to install, works fantastic.With crime skyrocketing I thought I better start carrying larger caliber rifle now days.
Ev
2025-01-31 16:58:13
I bought this after lots of positive reviews. After the install and a drive around, I took it out. Here's why:-If you have a sunroof, and hit a rough patch, the magazine or grip will bounce and hit.-I put a M&P 15-22 in the front, but it always sagged down. The magazine will not stay horizontal. You can bend the grips and try to tighten it, but it won't solve the issue.-If you are trying to put the grips/holders on the innermost holes to hold a small rifle you won't be able to do both since the threaded bar will block one of them.-Frankly, I was unimpressed with the price considering what arrived. Still, there isn't another like it on the market, so I figured I would give it a go. I'll have to find another option now.I returned it.Installed on a 2018 F150 with the panoramic sunroof.
Adam Campbell
2024-12-10 16:20:55
With the product being as expensive as it is it should come flawless with no issues. The first time I ordered the item it came all scratched up and in no kind of wrapping material to keep the parts from clanking around during shipping. So I did a return and got another one it isn't as scratched up but still not perfect. The fact that is made in USA is one of the big reasons I got it. But, come on as much as you are making on this product you can afford to throw in some bubble rap to make it so it doesn't get beat up during shipping. The functionality of the gun rack is great but disappointed in how it came twice. I could understand if it was a one time deal but, to come twice like that is just poor quality control on their part. Other than that product is sturdy and well built and rides well in the truck.