Your cart is empty.
Your cart is empty.Product Description
birch edge banding
-
EASY APPLICATION
Birch edge banding
-
First
You simply hold the edge banding in place, run over it with a household iron to heat the adhesive
-
Second
Wait for the edge banding cooling 10 minutes
-
Third
Use the back of a utility knife to scrape off the burrs on the edge banding.
-
Final
Finished
EASY APPLICATION
Birch Edge banding is a thin material used to seal the sides.
Laminate
Cabinet
Door
Desk
Black edge banding
Compare
Melamine | Material | Melamine |
Black | Color | White |
250 ft | Length | 25 ft |
1/2 inch | Width | 1 1/2 inch |
| | Pre-glued | |
Melamine | Material | Birch Natural Wood |
Black | Color | Birch |
250 ft | Length | 100 ft |
1/2 inch | Width | 2 inch |
| | Pre-glued | |
Melamine | Material | Maple Natural Wood |
Black | Color | Maple |
250 ft | Length | 50 ft |
1/2 inch | Width | 7/8 inch |
| | Pre-glued | |
Melamine | Material | Oak Natural Wood |
Black | Color | Oak |
250 ft | Length | 10 ft |
1/2 inch | Width | 3/4 inch |
| | Pre-glued | |
- Melamine edge banding
- Birch edge banding
- Maple edge banding
- Oak edge banding
For carpentry
Birch Edge Banding
Birch Edge Banding can make the work of carpentry easily.
Ashopper
2025-08-23 12:53:26
This is my second order of the 7/8 inch x 250ft Wood Edge Banding, and I couldn’t be happier. Unlike other options I’ve tried, the color of this edge banding is a perfect match for my project, blending seamlessly with the wood. The pre-glued backing makes it super easy to apply, and the flexibility is great for working around curves. Highly recommended for quality and consistency!
Hongwei S.
2025-08-16 15:27:51
I bought one 100ft roll and one 50ft roll for my DIY walk in closet cabinet. The quality is very good and easy to use for DIYers. The color matchs my cabinet very well. I like it. However, the 50ft roll is fratured/broken due to squeezing. I need to use them urgently so I could not ask a replacement because they want it back if you want a replacement. This is reasonable. So, I contacted the customer service, they immediately refund me without shipping it back. I was so pleased with the customer service. I will absolutely recommend it.
Johnny Y.
2025-07-30 20:06:20
Easy to apply and works fine but the face feels rough and a little cheap. Feels like you could give yourself a splinter running your finger across it if you're not careful.
JC
2025-06-02 10:49:07
Worked perfect to finish the edge on a three-quarter inch piece of plywood. Pretty easy to iron on with a regular iron. Just put the top of it flush with the top of the plywood and then I use a razor blade knife to shave about a 16th of an inch off of the bottom.I would totally buy it again.
Michelle Coscia
2025-05-12 12:48:03
Adheres easily and stands up to use. Maple edge banding matches maple plywood well.
Gray Svcs
2025-03-07 14:33:25
I see some complaints relating to adhesion - this was not my experience. This could very well be down to inconsistency in manufacturing, but in my experience this outperformed 2 others brands that I have used.Specifically, this product did not tear-out while trimming, and once adhered to a prepared surface it does not readily separate. It does help to ensure that you are using a heat source that is appropriate for the task.Caveat: once again, Your Mileage May Vary - but I had absolutely no problems with this. If you find that you struggle with adhesion, you CAN purchase separate heat-bonding adhesives and supplement if you encounter difficulties... Although many would consider this not worth the time and effort, it helps to cut down on waste in the shop. Adhesive is cheap - but so is edge banding, so you do you!
olyone
2025-02-25 11:36:11
great product
BronkBuilt
2025-02-08 12:45:39
This is very thin. After I put it on the edge of my plywood you could see through it and see the different plys. Also, the glue is not great. It slides around very easily when putting on with the iron and once on it can peel back off pretty easily. This was a small shop project that I'm painting so no big deal. Glad I tried it on that before my nicer project. I'm returning this.
Gilles
2024-12-24 11:50:56
Tel que décrit
YC
2024-11-19 13:22:42
The adhesive is not strong enough and I have to apply contact glue to make sure it bond well.
Recommended Products