Your cart is empty.
Your cart is empty.Product Description
Energy-efficient LED light: ETL & cETL Certified, 50K hrs lifetime, instant on, no flicker/UV/mercury. 20W, 1000L, 120V, wet loc.
Easy 3-wire install.
Frosted lens, black powder coating
Get a certification of authenticity with every purchase!
Mark of NJ
2025-08-19 15:57:27
I just installed this. Here are the steps to help people out there. First follow the instruction to download the app for Android or IOS. Scan the barcode that came with the instructions. I installed it on my Android phone. Once Smartlife app is installed, connect to your Wifi. Follow the instruction that came with it. Then click on the 3 dots on the top right (see my pix. circled), go to 3rd party control, then link it to Alexa. Once linked, open your Alexa app, add the device as switch. Click Other, Alexa will see Scan and should Discover the device (Smartlife). Then just follow the screen process as how you add devices with Alexa. It should install with no problem. Once done, just edit the device name as what you wanted. You can now adjust the light as long as your bulb is dimmable. Good luck. 😀
Neil s
2025-07-22 14:40:55
I bought this because I wanted something non digital and intuitive. It was very cheap but still UL listed which is important to me. It does feel clunky and cheap but I use it a lot and it is holding up fine. Came with face plate which was a nice convenience.
Ivan Kennedy
2025-07-08 17:56:30
I installed 2 ceiling fans in my living room and wired both up to this switch (probably not recommended). I made sure both fans together pull less amps than what the switch is rated for. the switch does a great job controlling the fans in sync. I will go over the fan switch first and the light switch after. just like other reviewers have said, the 2 lowest levels of the fan control are almost unusable for how slow they are so I labled the switch with just a High and Low setting with masking tape and we never use the lower settings. Also, 4 is low and 1 is high, that is annoying but no big deal. The switch is hard to move between the different settings and clanks through the levels. its a bit cumbersome, but my 2 year old can turn it on so I guess I cant complain too much about that. I can see a spark inside the switch going from level to level but I read that on reviews for other switches as well, so maybe all are like that. As for the light switch, I hooked it up to some dimmable LED lights and it works tremendously! they dim the lights all the way down to 0% with no flicker or buzzing. the slider is smooth and effortless and dims or brightens the lights very smoothly. overall I am satisfied with this item and it does a great job.
Tom T
2025-05-25 20:00:26
I installed two Almond 4 Speed Ceiling Fan Wall Controls with LED Dimmer and we have been using them for a couple of weeks. I like the way they work. The fan is now easy to set to one of four speeds and the the light dimmer brings the lights from total brightness to very very dim. Some switches that I have used barely dim the light, this one works perfectly.This was not part of new construction, I was replacing some old switches that had very small turning knobs which I found hard to use. I find these much easier to control. Our old switches had decorative plates around them so we did not use the plates that came with the unit. The switch unit is standard size so the plates are interchangeable. We're very happy with these switches.
Dandy Don
2025-04-08 10:44:30
Out of the box, this item has a look and feel of quality. However, after installing and actually using the switch, there are some issues:Pros:It works.The wires are clearly labeled to assist installation.The design of the switch is attractive.The light switch easily slides up and down and clicks off.Cons:The fan switch is hard to move up and down. Excessive pressure is required to get the number you want, and it is easy to go past your desired setting and have to return back to it.The numbers that represent the fan speeds are not intuitive. If you want the slowest speed, you must move the switch all the way to #4, which is at the top. This is completely backwards and is not instinctive. The lowest number should be the lowest fan speed, and the highest numbers should be the fastest.
DonCee
2025-01-26 19:14:11
Unlike some of the new light/fan switch choices that are out there, I’m happy to say it does the job and is pretty much idiot proof from the standpoint of use and installation..
Jim
2025-01-03 10:23:16
Be weary, this unit ran my fan at a very low speed when set to high ( yes i made sure the pullchain was correct). I thought it was just a fan issue but then decided to install a different name brand switch and without touching the pullchain, the fan ran at a typical high speed. Because I decided to try this other switch 2 days after the return window, I loose. Oh well. I may have wired it wrong, but it was pretty easy to connect so take this review as much as you want.
Larry Eaton
2024-12-08 12:31:16
I have a ceiling fan and light kit. The previous homeowner had installed a single position light dimmer with fan control for this. The light control became unreliable, would sometimes just turn the light on in the middle of the night. I was going to replace it with the same model and found the model was incompatible with LED's which I'd been using. Maybe that's why it went bad? Anyway, found this control, fits in a single position in the 3 position gang switch box, but still allows control of both fan and light, AND supports LED's. works great. Does everything the old one does for less money, LED compatible, and looks nice.
Recommended Products