Your cart is empty.
Your cart is empty.Product Description
Notes on Use
- Appropriately reducing the cutting speed and feed speed can prolong the service life of the reamer;
- When working, it is necessary to add cutting fluid to protect the cutting edge to make the cutting smoother;
- When the oxide film or other hardened layer remains on the surface of the workpiece, it can be removed by reverse milling.
Feature<1>
- It adopts a suitable negative rake angle design, which is effective in anti-vibration and has good guiding performance.
- The use of large core diameter enhances the rigidity of the tool to make cutting and chip removal stable.
Feature<2>
- The shank is finely ground and chamfered, with a high horizontal reference.
- Efficient clamping and high concentricity provide high accuracy for product processing.
Feature<3>
- Wide chip flute, H7 high precision
- Smooth inner surface, Smooth chip removal without residue
Explanation of Reaming Allowance
- In order to improve its dimensional accuracy and hole surface quality, reasonable reaming can effectively improve the hole accuracy and surface quality.
- Generally, the reaming allowance is 0.1-0.25mm (one side). For larger diameter holes, the reaming allowance should be increased appropriately, but the allowance should not be greater than 0.3mm.
- There is an experience that suggests to reserve a thickness of 1-3% of the reamer diameter as the reaming allowance (diameter value). For example, it is more appropriate to add a Φ20 reamer with a hole diameter of about Φ19.6: 20－(20×2/ 100)=19.6
- Reaming allowances are usually made smaller for hard materials and some aerospace materials.
T Hoff
2025-09-05 16:22:12
Made quick work of a couple of dimensionally challenged holes in a piece of aircraft aluminum that were holding up a project of mine. Arrived the next day (on Sunday morning) and fifteen minutes later all four holes were properly sized and I was able to fit the pins that were supposed to go through them.
Allegro Winds
2025-09-04 13:11:48
Good accuracy for the price.
Jeff Mudek
2025-08-22 14:25:00
What I needed
Customer Mr D
2025-03-29 17:20:26
Looks like cutting edge has pits and is rough. Quality does not look good. Don't think wil last I'm returning.
Serhii
2024-12-29 16:07:26
Works fine.
Recommended Products
$27.49
$ 14 .99 $14.99