Your cart is empty.
Your cart is empty. The Handee Clamp has many useful applications - Farm, auto, truck, aviation, marine, ATV, UTV, snowmobiles, motorcycles, and more.
AVIATION MECHANICS- While working on an airplane, one will inevitably encounter a tight space. The Handee Clamp will securely hold onto whatever you put in its jaws, enabling you to reach into that tight crevice so you can focus on the job at hand and not worry about dropping the hardware you need. It also works great with those pesky Adel clamps that can be difficult to hold down while securing the bolt.
AUTOMOTIVE MECHANICS - Whether you are working under the dash or under the hood, an auto mechanic will eventually encounter a situation where they will need that extra reach the Handee Clamp can provide. Many argue a set of needle nose pliers can do the same job, but the profile of the handles will still handcuff any good mechanic as they reach into the tight space. Pliers also require constant pressure, something you do not need to worry about with the Handee Clamp.
AROUND THE HOUSE - If you have a toolbox at home, make sure you have this tool in your inventory. There is no telling when the next time you'll need The Handee Clamp to help you with that "Out of Reach Grasp". For a relatively inexpensive product, it can save you hours of frustration which makes it more than worth its value.
USA shop-built tool that is designed to attach nuts, bolts, or hose clamps in hard-to-reach places.
Nuts and clamps in pictures are not included.
JEM
2025-09-01 10:36:17
I like the fact it is made by a smaller USA business, and it seems to be a little heavier than another brand that is out there. It is a very simple tool, but very handy.
Gunslinger 47
2025-08-05 17:17:13
Already reviewed this item. Works great! Good Seller!
hje123
2025-07-14 10:25:14
I do a lot of car work and engine space is so cramped it’s a pain to get some bolts out. It’s worse to get them back in! This tool is a savior!
JOHN LEWIS
2025-07-11 12:30:56
Tool works great. You will not use this tool often but when you need it, you will save time with it .
Hgnomentat
2025-06-30 13:04:30
Nicely done. Meets a very specific need. There are several other "nut holders" from various sources but they tend not to meet the central need, which is to hold a nut where access to it is limited from above, that is, along the axis of the bolt. In fact, they seem to assume the needed assistance is where you can already put your finger, a wrench, or the like on the nut because they grip the nut from the top. With this tool, you can also hold the nut if you have that kind of access as well as simply from the side. I've found other methods such as using tweezers or forceps/hemostat from the side to be faulty because they do not close on the flats with a parallel orientation; at least one of the tweezer or forcep jaws will be at an angle. So if you put any force on it. the nut is prone to disengage. Of course, when you get it, you realize it would simple to make your own, but I don't think I could do it better except by using quite a bit of time - so it's worth it.
Mr.Rita
2025-06-18 09:28:34
One of the handiest gadgets in a long time. A real helpful tool.
mtmotorguy
2025-06-10 11:08:13
Just the ticket to allow you to place a nut in a location that you cannot access with your hand. Simple design allows you to access tight location to place a nut that you cannot access any other way.
Mark Pritt
2025-06-08 19:29:38
Nothing
JEM
2025-05-08 13:39:17
I like the fact it is made by a smaller USA business, and it seems to be a little heavier than another brand that is out there. It is a very simple tool, but very handy.
Gunslinger 47
2025-05-06 16:41:21
Already reviewed this item. Works great! Good Seller!
hje123
2025-05-02 12:07:41
I do a lot of car work and engine space is so cramped it’s a pain to get some bolts out. It’s worse to get them back in! This tool is a savior!
JOHN LEWIS
2025-04-19 21:37:03
Tool works great. You will not use this tool often but when you need it, you will save time with it .
Hgnomentat
2025-03-31 13:33:11
Nicely done. Meets a very specific need. There are several other "nut holders" from various sources but they tend not to meet the central need, which is to hold a nut where access to it is limited from above, that is, along the axis of the bolt. In fact, they seem to assume the needed assistance is where you can already put your finger, a wrench, or the like on the nut because they grip the nut from the top. With this tool, you can also hold the nut if you have that kind of access as well as simply from the side. I've found other methods such as using tweezers or forceps/hemostat from the side to be faulty because they do not close on the flats with a parallel orientation; at least one of the tweezer or forcep jaws will be at an angle. So if you put any force on it. the nut is prone to disengage. Of course, when you get it, you realize it would simple to make your own, but I don't think I could do it better except by using quite a bit of time - so it's worth it.
Mr.Rita
2025-03-03 15:52:26
One of the handiest gadgets in a long time. A real helpful tool.
mtmotorguy
2025-02-28 10:04:19
Just the ticket to allow you to place a nut in a location that you cannot access with your hand. Simple design allows you to access tight location to place a nut that you cannot access any other way.
Mark Pritt
2025-01-10 17:27:51
Nothing
Recommended Products
$37.99
$ 19 .99 $19.99