Your cart is empty.
Your cart is empty.HealSmart 6 Inch Air Carbon Filter 6" Premium Australian Virgin Charcoal Smelliness Control, Fit with Inline Duct Fans, Free Pre-Filter, Reversible Flange and Hook for Grow Tents, and Hydroponics
Dan
2025-09-01 11:23:07
Used these to make an air curtain for the new fireplace. Ultra quiet and very good air movement while being very quiet at the same time.
Amerigoods
2025-08-29 11:41:27
We use these on our laser engravers and they do a good job with fumes and smells.
LRS79
2025-08-16 16:27:30
Does exactly what a needed it to.Pretty quiet also.
Ken Adams
2025-08-08 18:49:28
No power switch but is not as loud as some fans i have used. Works well on glowforge but next time i would get a higher cfm fan.
David James
2025-08-07 12:51:31
I have this and 2 others different name. I like these for smoking, soldering and blasting ass outside without leaving my room. One is an air filterThey’re all the same but this one was a good bit cheaper.
Greg Fishback
2025-08-02 16:50:51
The fan moves a lot of air, it is fairly quiet. The problem with the one I received is when installed in a hose with no backpressure, it leaked air around the seam of the 2-part housing. This appears to be glued and not easily split back apart so the first thing I had to do was run a bead of RTV sealant around that seam.
Ernest Walker
2025-07-26 14:47:33
It's doing a great job of keeping order under control so nosy neighbor's don't smell anything
Jason Timerding
2025-07-15 16:25:23
I just bought something cheap till I could get a more expensive, better one, but this little fan surprised me. Ive had more expensive name brand ones that this fan works just as good as. I get good air movement with it and have about 4 foot of exhaust hose connected to it and when you put your hand on the other side, you can feel the air blowing out pretty good. I have it in a closet grow that is about 4X3 feet. I would suggest a little bigger fan for a room this size, but for what it is, it's definitely doing the job!!! I would purchase another one of needed
The Scribe
2025-07-11 11:50:24
Bought in March 2024, but not installed until today. Ran for 10 minutes then stopped. My meter suggests it is burned out. There was no smoke, but the my meter shows no continuity through the coil. It's not maintainable, so I need to buy a replacement. I say poor quality, not just because it failed so quickly, but also because, while it was running, I could feel air escaping from the join in the 2-part casing.
Dan
2025-07-04 15:45:06
Used these to make an air curtain for the new fireplace. Ultra quiet and very good air movement while being very quiet at the same time.
Amerigoods
2025-06-14 17:21:55
We use these on our laser engravers and they do a good job with fumes and smells.
LRS79
2025-05-26 11:10:18
Does exactly what a needed it to.Pretty quiet also.
Ken Adams
2025-04-21 14:19:58
No power switch but is not as loud as some fans i have used. Works well on glowforge but next time i would get a higher cfm fan.
David James
2025-03-23 17:17:10
I have this and 2 others different name. I like these for smoking, soldering and blasting ass outside without leaving my room. One is an air filterThey’re all the same but this one was a good bit cheaper.
Greg Fishback
2025-01-31 09:06:58
The fan moves a lot of air, it is fairly quiet. The problem with the one I received is when installed in a hose with no backpressure, it leaked air around the seam of the 2-part housing. This appears to be glued and not easily split back apart so the first thing I had to do was run a bead of RTV sealant around that seam.
Ernest Walker
2025-01-16 13:07:49
It's doing a great job of keeping order under control so nosy neighbor's don't smell anything
Jason Timerding
2025-01-12 10:44:49
I just bought something cheap till I could get a more expensive, better one, but this little fan surprised me. Ive had more expensive name brand ones that this fan works just as good as. I get good air movement with it and have about 4 foot of exhaust hose connected to it and when you put your hand on the other side, you can feel the air blowing out pretty good. I have it in a closet grow that is about 4X3 feet. I would suggest a little bigger fan for a room this size, but for what it is, it's definitely doing the job!!! I would purchase another one of needed
The Scribe
2025-01-07 17:11:27
Bought in March 2024, but not installed until today. Ran for 10 minutes then stopped. My meter suggests it is burned out. There was no smoke, but the my meter shows no continuity through the coil. It's not maintainable, so I need to buy a replacement. I say poor quality, not just because it failed so quickly, but also because, while it was running, I could feel air escaping from the join in the 2-part casing.
Recommended Products
