Your cart is empty.
Your cart is empty.Product Description
Steel Dual Arm Auto-Retractable Pressure Washer Hose Reel - 3/8" X 50 FT
-
Steel Dual Arm Auto-Retractable Hose Reel
FIXFANS High Pressure Washer Hose Reel for Water/Air/Oil
pressure washer hose is not included
-
UPGRADED DESIGN
Easy to Operate
-
SIZE MAP
Working pressure: 4000 PSI.
Max temperature: 212℉ / 100℃
-
Great Compatibility
3/8" QC Plug to M22 14mm male
360° swivel water joint (3/8" NPT female)
4 FT inlet hose (M22 14mm female+3/8" NPT male)
Fits most pressure washer hoses, air hoses, oil hoses, and pressure washers
-
Controlled Automatic Rewind
Say goodbye to tangled hoses and time-consuming manual winding.
-
Max Capacity: 50 FT
The pressure hose reel with a retractable spring-driven mechanism, this high pressure hose reel offers convenient and controlled retraction for 3/8" ID pressure washer hoses up to 50 ft long.
-
Can secure mounting to any flat surface outdoors indoors. Such as ground, wall, or ceiling mounting
-
The disassembly work is only allowed for a qualified technician
-
Secure and stable mounting to any flat surface outdoors or indoors
UPGRADED DESIGN & EASY TO USE
Adjustable Lock
Locked at any length, and rewind automatically
Solid Stainless Construction
Black powder coating resisting corrosion
360° Swivel Joint
Swivel brass inlet, 3/8" NPT female
Locking Ratchet
Securing desired hose length
UPGRADED DESIGN & EASY TO USE
Steel Wire Hose
Explosion-proof, wear-resistant
Large Steel Base
Mounting to pressure washer frame and any flat surface
Wide Application
Can mounting to ground, wall, or ceiling mounting of factory workshops, garages, body shops, automotive workshops, etc.
Wide Application
Allow for secure and stable mounting to any flat surface outdoors or indoors.
Wide Application
The pressure washing hose reel's adjustable guide arm and robust steel construction base allow for secure and stable mounting to any flat surface of outdoors or indoors. Such as ground, wall, or ceiling mounting of factory workshops, garages, body shops, automotive workshops, etc.
anon
August 29, 2025
Update 10/10/24: No more leaks since last update. I'm starting to depend on it and take it for granted. The convenience alone makes the extra work to fix leaks well worth it. I still can't understand why anyone would consider a manual reel.Update 9/26/24: Sprung a leak in the swivel joint on 3rd use! It was easy to take apart and replace all the o-rings with new ones with some silicone grease. First I thought it was the 2 o-rings in the middle of the swivel housing but noticed the leak was coming from the shaft as it bolts into the center of the reel. Was able to see pinhole leak with normal tap water pressure and then noticed the inside o-ring was mangled. Removed the shaft and replaced that o-ring as well as adding a healthy dose of teflon tape on the shaft threads. All is well now and I appreciate how easy it is to service most of the unit. I do worry about the proprietary quick-connect extension and hopefully that stays leak-free for a long time.Original review:Finally got all the fittings in to connect the Adams 1/4†60ft steel-braided superflex hose (which is also amazing). Works perfectly and no leaks. Reel can accommodate 60’ hose easily with enough tension to draw the entire line into to the roller feed. installation was a breeze and definitely recommend lag bolts since this has a bit of heft to it. Jumper hose is quality and appreciate the swivel. It’s working very well wall mounted with an Active 2.0 pressure washer. The ratchet is smooth and very quiet compared to oldschool reels I’ve used in the past for air lines. It’s such a convenience to have and definitely recommend. Hoping it holds up well to abuse..
Randy H
July 29, 2025
Works great, exactly what I needed.
David murdock
July 4, 2025
I've had a few issues with it leaking and the ratchet not working properly, but it has been functioning daily for our shop for 6 months.
DM
June 27, 2025
By adding these quick disconnects it makes it so much faster to connect up pressure hoses and to clean up afterwards swell.Should have bought them years ago.
mustapha
June 4, 2025
The U connector gets cracked because is cheap material and very tiny I been have same issue of leaking but I fixed but this issue hard to get resolved because even if been replaced hard to to tighten.
Christina Bordelon
May 30, 2025
I am doubtful this thing is ever going to break as compared to my old hose reel. It feels like professional quality construction to me. It can hold more than 50` as well. Some of the provided fittings were slightly out of spec for my ryobi pressure washer but I was able to use adapters to get it all hooked up. No leaks! I suggest using a thread sealer like Permatex as opposed to the included tape, which did leak on me no matter what I did.
Todd
May 24, 2025
Perfect fit works amazing
Thomas Lindner
May 14, 2025
These appear to be good, quality fittings. Though I haven't tested them with water through the pressure washer yet, I did install them on the hose and pressure washer. I believe they'll do what they're designed to do.
Tim C.
May 7, 2025
Just the right quantity I needed for a fair cost. It works great on my pressure washer gun for quick connection to soap blaster and extension wand.
Rosevear Creations
May 3, 2025
At Rosie Dazzlers, these quick-connect adapters have been a huge time-saver for our detailing work. They attach securely, don’t leak, and make switching between hoses and tools effortless. The build quality is solid, and they hold up well under high pressure. A must-have for keeping our workflow smooth and efficient!
Customer
April 26, 2025
What I like about the product it makes it much easier to connect to the power washer.
Newt from Greely
February 27, 2025
Great quality, great fit, works well.
sundayDX
November 24, 2024
Fits high pressure Outlet from the pump and gun.Tested and does not leak. A Little bit of neutral ph lube can help o rings on the long run.
Recommended Products
$177.63
$ 71 .99 $71.99