Your cart is empty.
Your cart is empty.Product Description
P. Kaplan
2025-07-23 11:00:11
Not much is more annoying that the sound of a loose fitting hitch. It rattles, squeaks and pops. This Anti-Rattle Stabilizer does the trick. It takes just a minute or two to install and it works flawlessly.
Kristin
2025-06-30 11:35:41
super solid quality, does the job, does not rattle.
FuntimeFandrew
2025-06-15 18:25:39
Product works great. If you’re in a salty area, both pieces will begin to corrode after a year or so, but still function
DIY Guy
2025-05-31 14:04:48
My only complaint is that the loop isn’t stainless steel like other models. Probably not a big deal for most people if you’re not going to leave it installed for an extended time. Price is right though.
Paul from Santa Rosa
2025-04-21 13:01:52
I just bought a utility trailer and am using the receiver hitch on my car for the first time. It was really noisy on the short drive home, my temporary fix was to wrap some duct tape around the hitch shank, which worked, but made it hard to insert and remove the hitch. This hitch tightener was the least expensive solution I could find, and it works. Mine came with two types of nuts, plain and "airplane nuts" with a plastic insert that works as a locking device in addition to the lock washers supplied. I guess you have a choice, I went with the airplane nuts. It didn't come with instructions, so here's what I figured out: first loosely assemble it, then slide it on the shank of your hitch. Be sure you put the plate on correctly, as shown in their photos, you could put it on upside down or backwards, or... both. Then slide the hitch into the receiver and insert your pin as usual. Slide the hitch tightener as far toward your vehicle as it will go, and then tighten the nuts evenly. Try to shake your hitch, it should be rock solid. To remove your hitch, just loosen the nuts a little, and it should come off. Next time you use it, you'll only have to tighten it a little as it will already be close. In the user uploaded photos you will see some where the guy installed it backwards, and he complains that it bent. Look at the seller's photos, so you don't make that mistake.
Just me 2
2025-02-26 12:31:48
This takes care of the play in the receiver hitch, making the carrier more stable
Wes
2025-02-15 12:54:46
Excellent product
Jeff Lankford
2025-02-06 18:15:14
The first time I towed anything in my 2023 Ford Maverick it was scary. The hitch receiver was so loose and clunked around. Sounded like I was going to break something. I purchased this and it tightened everything up and now it works and sounds great. Do note, for my truck I had to mount it upside down. It will rub the coating around the hitch receiver, but I'm ok with that.
Recommended Products
$65.04
$ 27 .99 $27.99
$84.99
$ 34 .99 $34.99