Your cart is empty.
Your cart is empty.Product Description
CLASSIC MID-CENTURY DESIGN
BOON Living Hairpin Table Legs are designed specifically for DIYers, makers, and professionals. These hairpin metal legs are heavy duty proofed and will add both stability and mid-century modern style to any and all furniture projects.
SUITABLE FOR ANY PROJECT
You are able to build any number of designs including cabinets, coffee tables, benches, bedside tables, desk/dining tables, counter tables, nightstands, end tables, kitchen tables, and bar!
EASY INSTALLATION
- Each leg has 4 pre-drilled holes in the mounting plate that allow for easy installation. Screws are included. Tools are NOT included.
- These legs are black powder coat finishes. We stock leg sizes for any project for 6", 10", 15", 18", 20", and 30". ; The Serenta Hairpin Table Leg brackets measure 4.75" x 4.75".
Solid Steel
Floor Protectors
More size
Combination suit
PearProjexts
2025-08-29 15:02:35
Purchased Home Soft Things Hairpin legs in various sizes. We make old barn wood tables. These are my favorite because the feet are attached and adjustable. Legs are strong. Come well packed.I made one table with the legs that have small round feet that snap on....they are strong but the feet are awful.....just keep falling off.I will always purchase these. Wish they made a few additional heights for various uses.Spend a little more for these....well worth the investment for the strength and adjustable feet.
Customer
2025-08-25 20:02:12
I had no trouble installing these legs, and they look great. I am not very handy, so, perhaps it will help you if I explain how I installed the legs.What I needed: Finished table top,, 16 lag bolts, nut driver, drill and drill bit, masking tape. Really, I needed all of this stuff! (Read 1 and 2 before going to the hardware).I used a pencil and a ruler too.1. I measured the thickness of my table top - I had finished a piece of Butcher Block.2. I took one of the table legs to the hardware store (I chose ACE) to purchase 16 lag bolts and a nut driver for the lag bolts. (To help you, they will need to know how thick your table top is. Your bolts (or screws) need to be shorter than the thickness of your table). I also asked what size bit might be the best. (If you need the bit and masking tape, don't forget that.)3. From the tip of the drill bit, I measured how deep I wanted the bolt to go into the table. I placed the tape on bit at that depth. (nope, not on the point, near the chuck that holds the bit in place. The point to the tape is how deep you want to drill - it is a measurement smaller than the thickness of the table top.)4. I used a pencil to mark where I wanted the leg (I put my legs about 1" inside the edges). I measured again.5. Holding the leg in place and being sure I was on my pencil line, I pulsed the drill into the hole with the taped bit until it was as deep as the masking tape marker. (After drilling just a little bit of the first hole, I verified that the bolt was going to be the right size for the hole)6. I put the lag bolt in place using the nut driver.7. I drilled and placed a second lag bolt in on the leg before drilling the last two holes for each leg and driving the bolts in place.I did go back and forth between the drill bit and nut driver several times. This might be a slower way to go, but I suffered no setbacks or errors. Even going very slowly, this only took 40 minutes.Thanks to those who recommended the nut driver. This job would have been difficult without.. The masking tape helped a lot too.By phone, the shipper recommended lag bolts for my 1.5 inch butcher block, although wood screws could be used. The lag bolts work very well and I am glad I used them.
Mxcs
2025-08-03 12:31:53
Very sturdy for a 200lb girl! Came with the needed screws. Made my curbside futon look modern. Going to order another set for the other half of the futon. Didn’t come with the rubber non slip grips tho.
Sam Lightbringer
2025-07-06 14:42:59
Pretty sturdy. But really for a dinner table height. I should have gotten shorter, but they're sturdy. I'm not gentle on my stuff and it's holding on strong!
C. Ram
2025-06-24 16:39:31
These did the trick for what I wanted, but the advertised photos did appear that the legs angled outwards a bit. In actuality they do not. You’ll see in my photo they drop straight down. Otherwise, the quality is excellent.
ibjb
2025-06-21 17:12:17
The adjustable feet are wonderful!
Randy Welsh
2025-06-07 16:12:47
Works great for me too make a table
James Pryde
2025-06-04 12:45:48
No problem with installation and they look great.
Deepak kumar
2025-05-22 15:31:57
Legs are slick and Sturdy. Great design.. no need to throw old tables, just replace legs with this one
Braulio Hernández Dotor
2025-05-17 21:55:36
Fue de gran utilidad, el producto
ANA ROSA
2025-05-01 11:53:24
Son estables y fuertes, se instalan con facilidad
Joanne Waddell
2025-04-29 15:19:19
Great quality and value. These would be 5x the cost in a store. They worked great on my repurposing project. Highly recommended. Screws included for easy installation.
PearProjexts
2025-04-08 10:39:19
Purchased Home Soft Things Hairpin legs in various sizes. We make old barn wood tables. These are my favorite because the feet are attached and adjustable. Legs are strong. Come well packed.I made one table with the legs that have small round feet that snap on....they are strong but the feet are awful.....just keep falling off.I will always purchase these. Wish they made a few additional heights for various uses.Spend a little more for these....well worth the investment for the strength and adjustable feet.
Customer
2025-03-22 12:34:12
I had no trouble installing these legs, and they look great. I am not very handy, so, perhaps it will help you if I explain how I installed the legs.What I needed: Finished table top,, 16 lag bolts, nut driver, drill and drill bit, masking tape. Really, I needed all of this stuff! (Read 1 and 2 before going to the hardware).I used a pencil and a ruler too.1. I measured the thickness of my table top - I had finished a piece of Butcher Block.2. I took one of the table legs to the hardware store (I chose ACE) to purchase 16 lag bolts and a nut driver for the lag bolts. (To help you, they will need to know how thick your table top is. Your bolts (or screws) need to be shorter than the thickness of your table). I also asked what size bit might be the best. (If you need the bit and masking tape, don't forget that.)3. From the tip of the drill bit, I measured how deep I wanted the bolt to go into the table. I placed the tape on bit at that depth. (nope, not on the point, near the chuck that holds the bit in place. The point to the tape is how deep you want to drill - it is a measurement smaller than the thickness of the table top.)4. I used a pencil to mark where I wanted the leg (I put my legs about 1" inside the edges). I measured again.5. Holding the leg in place and being sure I was on my pencil line, I pulsed the drill into the hole with the taped bit until it was as deep as the masking tape marker. (After drilling just a little bit of the first hole, I verified that the bolt was going to be the right size for the hole)6. I put the lag bolt in place using the nut driver.7. I drilled and placed a second lag bolt in on the leg before drilling the last two holes for each leg and driving the bolts in place.I did go back and forth between the drill bit and nut driver several times. This might be a slower way to go, but I suffered no setbacks or errors. Even going very slowly, this only took 40 minutes.Thanks to those who recommended the nut driver. This job would have been difficult without.. The masking tape helped a lot too.By phone, the shipper recommended lag bolts for my 1.5 inch butcher block, although wood screws could be used. The lag bolts work very well and I am glad I used them.
Mxcs
2025-03-21 11:41:03
Very sturdy for a 200lb girl! Came with the needed screws. Made my curbside futon look modern. Going to order another set for the other half of the futon. Didn’t come with the rubber non slip grips tho.
Sam Lightbringer
2025-03-14 18:34:18
Pretty sturdy. But really for a dinner table height. I should have gotten shorter, but they're sturdy. I'm not gentle on my stuff and it's holding on strong!
C. Ram
2025-03-01 18:17:00
These did the trick for what I wanted, but the advertised photos did appear that the legs angled outwards a bit. In actuality they do not. You’ll see in my photo they drop straight down. Otherwise, the quality is excellent.
ibjb
2025-02-26 10:30:26
The adjustable feet are wonderful!
Randy Welsh
2025-02-24 15:55:43
Works great for me too make a table
James Pryde
2025-02-16 17:55:48
No problem with installation and they look great.
Deepak kumar
2025-02-14 14:12:09
Legs are slick and Sturdy. Great design.. no need to throw old tables, just replace legs with this one
Braulio Hernández Dotor
2025-01-29 14:39:57
Fue de gran utilidad, el producto
ANA ROSA
2025-01-02 14:15:14
Son estables y fuertes, se instalan con facilidad
Joanne Waddell
2024-12-24 18:02:05
Great quality and value. These would be 5x the cost in a store. They worked great on my repurposing project. Highly recommended. Screws included for easy installation.
Recommended Products