Your cart is empty.
Your cart is empty.Product Description
Mark J. Hughes
August 13, 2025
This looks like it will attach to any IBC tote with the included adapters. 1 thing to note, if you've got an IBC floor level and you try to put this on, it won't be possible to get a garden hose to connect, so make sure you put your totes on pallets or turn the knobs sideways so that it comes out at 90 degrees so you can drain your tank.
Roy
August 1, 2025
Yup- this is exactly what I needed to turn a used pallet mounted plastic tote ( kind that is in the metal cages that DEF fluid comes in) into a pressure washer tank. Now I just put the tote on my trailer or truck, fill with water, and go around park properties pressure washing trash cans, walking trail, etc. Poor man's washer outfit.
Mandy B.
July 18, 2025
Everything went together easily. And a week or two in, it is still in place and holding. So far, there is nothing to compain about. Should anything with that change, there will be an update to this review.
Wired Fuzzy
July 4, 2025
This is a kit for putting a garden hose faucet on a large IBC tote water container. It comes with three different plastic adapters for use with the tote, and they are threaded with a 3/4" female NPT outlet to accept the all Stainless Steel valve. The valve is the star of the show though. It is a hefty piece made of Stainless Steel throughout, and it has an inner diameter of 3/4" or more all the way through the valve from inlet to outlet. Very few valves are made this way, most shrink down to barely more than 1/2" through the ball valve area. This means that this one flows fast as compared to the average valve. The fact that this is all Stainless Steel means that it won't corrode or collect fungus, etc. on the valve, which makes it a better choice for drinking water. This sells for a very reasonable price. In fact, just the valve alone in local stores is worth half again what this cost. That makes this an outstanding value, and I can highly recommend it.
Danny
May 7, 2025
Installation was straightforward and the adapters have been working reliably ever since.
Fredonyer it is!
March 2, 2025
The course thread adapter worked well on my tote. I have three other totes with fine threads and this set nor others I purchased, worked. Disappointed but am able to utilize the cam fittings to achieve what I wanted.
Sandi
February 23, 2025
I have an IBC tote for which I cobbled together a hose adapter. I'm tossing that and installing this. There are 2 female tote ends, one of which should fit your tote and a hose adapter that screws onto the female tote end.They included a quick connect and even the Teflon tape.Simple and effective.
Marilyn
January 1, 2025
This is a good kit with only one minor downside. That downside is the quick connect for the garden hose; It's pretty chintzy. That's okay though. I didn't buy a quick connect, I got a stainless IBC tote adaptor.But what's so important about stainless? I brew and distill a bit, and it's my experience that no matter what's on the label it's very hard to be sure that any brass you're using is lead free. By getting stainless you don't have to take anyone's word, you just eliminate the possibility. If you're gonna use your IBC tote for potable water, or for watering things you're gonna eat (whether it's animals or the garden) you want as few chemicals and contaminants as possible. If you spend a couple extra bucks you won't have to think about it for a long time.And I do mean a long time. From brewing, distilling, and being a professional cook for decades I've come to appreciate different metals for different things. Since this is gonna be left outside it's important that it is REALLY stainless, and not just meeting the minimum requirements to be called stainless. Obviously I haven't had this for long enough to say how it performs over decades, but my standard test that's worked well over the years is to see how magnetic a piece of stainless is. If it won't stick, then it's marine grade and can be outside for years in all weathers. If it sticks hard, then it's only kinda stainless. The ball valve that ships with this kit is only just barely magnetic using a strong neodymium magnet. This indicates to me that it will almost certainly be fine for long term, outdoor exposure in a fresh water environment. That's perfect for my needs.Other than the above there's not much to say. It arrived well packaged with protectors on the the threaded metal parts to prevent damage. What arrived was what was promised. It's a quality piece of kit for a reasonable price. I'd buy it again.
Recommended Products