Your cart is empty.
Your cart is empty.Set the heights of router bits and saw blades with greater accuracy! This 3-in-1 digital router combines the functions of three tools: a depth gauge, height gauge and thickness gauge. It is a metal rule with a Super Large LCD display, housed in a heavy-duty polycarbonate frame which allows it to stand freely. The frame allows the tool to be set at 70, 80 or 90 degrees as well as horizontally for accurate measuring. The measuring range is 0-6", with a router depth of 0-3.10" and a slot depth of 2.90". It features buttons for on/off as well as zero set functions, and it easily switches readings from inches to metric to fractions at a touch. Two hardened steel measuring anvils (flat and point) are included. Supplied with a 3V CR2032 battery and packaged in a protective plastic case.
J. Carter
2025-08-10 17:46:58
Makes setting up saw blade and router bit depth way-y easier and much more accurate.This tool is obviously designed by people who use tools. Very intuitive and responds quickly to commands (no lag time).My device came with two extra (three total) batteries. This is an inexpensive way to say “hey, we know you don’t want to go to the drugstore for batteries today.†There is also a wonderful conversion chart on the back of the tool with standard measurements for parts and metal sheet goods.The only thing I do not like about this product is the fact it is made of plastic. It would probably have to sell for twice as much if made of metal so I do believe it to be well worth the money as is. When they make a metal version I’ll buy it but still keep this one for backup.
HSH
2025-08-08 13:50:31
I have only used this for a week, but what a time and frustration saver. It is now very simple to accurately measure the height of the table saw blade. It is made of durable plastic with a wide enough base to stand perfectly straight. The measuring tip is hardened steel so it should not be damaged by the saw blade teeth. My only complaint is that when taken out of the package the battery holder is reversed to prevent battery drain in the package. However this is not mentioned in the packaging anywhere. The battery holder doesn't look out of place when reversed so I had opened a second battery (it comes with 2 spares) thinking that the battery in the unit was dead because it would not "turn on". After about 10 minutes of hassle (when the second battery also did not work) I peered into the battery housing and discovered that the contact is on the bottom of the housing and that the battery holder, as received, had the contact on the top. Turning the battery housing over solved the problem. Just a one sentence notice would have been sufficient to prevent the anxiety and wasted time. Otherwise the unit appears to do what it is intended to do very well. I am looking forward to other uses, and especially being able to measure the depth of angles.
Tim B
2025-06-22 10:40:31
Really a great product for the woodshop. Lots of uses to get the depth measurements correct. It is plastic and I suspect it won't take much abuse. Not that I would abuse it but things happen.
J. Jangula
2025-06-07 11:30:02
I do dado joints on a regular basis and have used a tape measure to set distances and heights for my router and table saw. My method has worked OK for the most part, but using this multi-gauge has been a huge help in terms of accuracy and efficiency. I am confident in my cuts and can easily reset measurements when needed.The tool itself is very light, which initially made me concerned about quality and the possibility of it breaking on me. However, after working with the gauge for some time now, I have found that it is very strong and durable.The LCD display has three measurement options; metric, fractions and decimals (accurate to .001, supposedly). I have mostly used the fractions setting, which has proven to be accurate based on test comparisons with a tape measure.It comes with two spare batteries and a pointed anvil (flat anvil comes installed). To replace the anvils, simply unscrew and screw them into the end of the ruler.For $20 (plus shipping, not prime when I purchased it), this tool is an excellent buy that I highly recommend!
G.I. McB
2025-06-03 11:19:45
I purchased this and have used it recently to help with setting up my router table for creating tenons. The gauge has performed flawlessly and has provided me with a very accurate means for setting my fence and bit height. It feels to be fairly solid, at least for a workshop environment. It is made of a solid plastic composite. The operation is simple and easy to adjust and lock in place. The gauge comes with a battery installed, but also has an additional battery in the package. There is also an additional tip which can be installed in place of the flat measuring tip to which will allow measure of inside corner depth. Zeroing the gauge is easy as it can be, 1) Place on flat surface 2) move tip to contact surface 3) Hit "0" button and your done.
Buckeye In MI
2025-06-01 13:19:42
The tool itself is fine as far as functionality, i.e. it can accurately measure distances, but it has a 3 flaws that can't be overlooked. First, it comes with 2 tips, 1 flat and 1 pointed, but it doesn't have any way to store/hold the 1 that isn't attached. This isn't much of an issue when using it, but it could definitely cause an issue for long term storage. There are humans involved, so someone will inevitably lose 1 of them (umm, like me). The ad does say "packaged in a protective plastic case", which is just the original, far-too-large packaging. A simple clip or threaded hole on the gauge itself would have solved this without affecting performance, and I can easily store the extra batteries with all my other batteries. Second, the buttons are rather small, and the On/Off and Zero buttons have very similar symbols. Not a big deal since you can lock it in place and then move/read it, but also not the best of designs. Third, it doesn't have magnets on the bases. It doesn't say that it has them, but it describes itself as being "for woodworkers and welders", so it should by default. The LCD is also somewhat tough to read, but I know a backlit screen would have eaten up batteries. As for recommending it, I'd say at least look at other products before buying this one. Maybe it's the best one out there, but that wouldn't remove the flaws this one has. I'll use mine for now, but I can see relegating it to backup status once I find a better one.
MartÃn Moran E
2025-05-14 10:20:03
Muy útil. Simplemente artÃculo que es necesario para trabajos de buena calidad.
randy webber
2025-04-18 13:07:26
Great guage , really speeds things up
Duncan
2025-04-07 11:25:06
Another quality product from Milescraft. This depth gauge is a.must have for woodworkers. Great for measuring depth of cuts for your table saw or router. The priduct is simple to use and the easy to read digital display shows fraction, imperial or metric readings. This is a muat have for rvery woodworker.
tony hodges
2025-02-21 13:04:30
does the job but a little stiff so readings tend to jerk.
Felix
2025-02-18 10:03:43
Not all that useful but nothing wrong with it
Recommended Products
