Your cart is empty.
Your cart is empty.Product Description
Cold Rolling
Milling
Heat Treatment
Welding
Blade Teeth Selection Advice and Welding Joint Comparison
How to Improve Life
- Blade installation is the first step, make sure teeth is shown outside the guide, and blade strip is clamped tightly inside the guide.
- Teeth direction should be the same with the direction of wheel rotation, twist the blade from inside to outside if teeth direction is opposite.
- Running-in is required when blade cuts metal for the first time. It's important for blade life. During running-in, cutting speed should be 1/3 of normal speed, feed should be 1/4 of normal feed. Usually, after the blade cuts the first several pieces, like 5-10 pieces, adjust cutting speed and feed gradually to normal speed according relative parameters and your metal.
- Blade tension will be different for differnt wide blades, as time goes on, blade tension will be reduced by the bandsaw and blade stretch, make sure the blade is correct tension, our recommended blade tension is 300N/mm2.
- Coolant will be useful to cool and lubricate blade and teeth during cutting, better coolant could avoid overheat on the teeth of the blade, and reduce friction between the blade and the metal you cut.
- Teeth selection is also important, here are our experience:
- big variable teeths (like 3/4TPI, 4/6TPI, 5/8TPI) are for cutting ferrous solid rod with big diameter;
- big constant teeth (like 6TPI) is for cutting ferrous solid rod with small diameter;
- big variable teeth (like 6/10TPI) is for cutting aluminum, copper, brass etc and other non-ferrous metal;
- middle variable teeths (like 8/12TPI, 10/14TPI) are for ferrous thick tubing, profile, sheet, plate etc;
- small constant teeth (14TPI) is for general purpose;
- small variable teeths (like 12/16TPI, 14/18TPI) is for ferrous thin tubing, sheet, plate, profile etc;
- small constant teeth (24TPI) is for ferrous thin tubing, plate, sheet etc, don't cut non-ferrous metal, like aluminum etc.
Welding Joint
We weld blades with high performance welding machine to make sure welding joint looks perfect.
Teeth Direction
Default teeth direction is rightward, if you want leftward direction, please twist the blade from inside to outside.
Original Package
Brand new with original package for this blade with tips behind blade pacakge to help customers.
Metalworking Type
Bi-metal blade is designed for metalworking, ideal for metalworking craftman, blacksmith, mechanic etc.
Compatibility
Accurate length with high performance, compatible with most bandsaws with more choices on teeth pitch.
Ideal DIY Tools
Bi-metal type, M42 grade, 8% cobalt with 2% tungsten, much more fatigue resistant and durable on metal.
Blade Life
Spring steel backer strengthens blade life, hardened edges to cut metal straightly with ease, blade works with high performance.
Acemechanic
2025-08-31 18:42:51
Wouldn't cut 1/4, 1/8th no problem customer service emailed and sent the correct blade
Larry Luce
2025-07-20 13:26:22
Tried cutting some thin walled stainless pipe, .030 thick and it tore the teeth from the blade.
Fred S
2025-07-12 10:43:02
Worked perfectly
J renzo
2025-06-11 15:48:19
Attempted to cut 1/4" plate mild steel. No go stated to cut then just stopped. This is my second blade ordered.Update: customer service reached out to me. Replaced the blade for a better one that worked. Although my bandsaw speed is too fast for these blades. I am in the process of slowing it down, but best customer service I have ever had. Will buy from them again because they do the right thing, and wants to make sure you're happy with their product. Added 2 more stars.
sawyer
2025-03-26 15:02:59
Bought this blade to cut some steel, turns out i bought the wrong one, seller informed me of this mistake and helped me out with what one to get, new blade performed flawlessly, couldn’t be happier
Daniel Hoffman
2025-03-05 17:07:49
Recently converted my 30yr old band saw for medal work and this blade cuts up my rr spikes like butter great value blade
B.E. Haley
2025-03-04 21:10:48
What a piece of crap. It lasted 10 seconds on 304 stainless bar stock. It barely cut 1/16 deep before the teeth were completely worn out.Update. Customer service is great! They reached out to me and offered to not only replace the blade I ordered, but they suggested a different blade that might work better. Unfortunately, I haven't been able to test it yet. Added 2 stars for some of the best customer service I've seen on Amazon.
Linda Ford
2025-01-10 15:18:03
I made 2 cuts on 1/8†thick mild steel for a total of about 10 inches of length. Would barely cut butter now. Yes, I did use a blade lubricant. A waste of money. Buy American made where at least you might have some recourse if the product is pure crap like this one is.
Recommended Products
$20.57
$ 10 .99 $10.99
$110.00
$ 49 .99 $49.99