Your cart is empty.
Your cart is empty.Derrick Mattox
2025-09-05 16:22:18
It gives you way more options for setting up your truck. Just take your time and everything will go together easy. You won't be disappointed. ðŸ‘ðŸ¾
Patrick S.
2025-08-29 18:54:04
Just takes a little time to setup but once put together it works great comes with everything you need and puts the weight up front
Marcell
2025-08-21 11:03:34
Good bones. Kinda weird shock placement but you can manage.
L4J
2025-08-15 15:43:30
Got this chassis as a mod for an SCX24 Deadbolt. At this point, there are few original SCX24 parts left besides the drive shafts and the electronics. This chassis is lighter and stiffer than stock, looks good, and offers a fair number of suspension attachment points.Trouble is there are no instructions. At all. Which isn't that big a deal, since if you spend a lot of time tinkering with these small scale crawlers, you get used to figuring things out. But it may take a bit of tinkering to figure out exactly where you want to mount things, and there is only one "wide" platform, which means either the electronics or the battery will be relegated to one of the narrow ones.My build ended up with the wide platform to the rear to mount the electronics, and the battery in front held on with velcro. It works fine for my setup, but it would have been nice to have more options (more than one wide platform, tabs at the ends, etc.) since this setup isn't quite ideal.I give it top marks for quality though.
Thomas
2025-08-14 14:19:13
Budget friendly, great LCG Chassis for the price angled skid multiple shock mounts and easy to put together.
Tim Rickencraig
2025-08-04 16:46:55
I have a Bronco SCX24 built almost entirely with injora parts. For the incredibly low price, it is an absolute BEAST. However, I have a few tips for this chassis.1: Get longer shocks. In most cases, a build won't benefit from shocks longer than roughly 43 mm, unless the build has serious modifications. If you're using the stock chassis and links, 43 is the absolute limit. With these, 43 is almost a minimum if you're trying to run a stock body. It sits so low in relation to the wheels that a lot of your rebound travel will be taken up just to achieve ride height. Get longer shocks to compensate.2: Have some magnets handy for body mounting. They'll help a lot. Use 3m VHB double sided tape, it's the absolute best and it's crazy thin.3: My build has the injora steering link, and EMax servo. At full compression, the front of the chassis hits the bolt that links the steering rods. Trimming about 2mm off would fix it.4: It will take A LOT of patience to get a stock body to fit, and probably a lot of trimming.
Austin
2025-07-28 11:00:10
This chassis was really solid and really cool and looks really good. But if you're not very good at DIYing then you're going to struggle to relocate your ECS somewhere on this because it doesn't give you a set location for it. I just kind of stuck it between the shock towers and it just makes everything very difficult. Turning it on. Relocateing your back but on the shocks etc
Wyatt W.
2025-07-27 16:06:10
Works really good on my scx24. If your using a furitek motor then you want to get injora's side plates they make for your esc and reciever.
Michi
2025-07-22 11:14:39
Dem Motor könnte man mehr Platz geben.Aber sonst ein cooles Chassis.
joakim
2025-07-14 18:57:51
Bra men ingen beskrivning
JJBK
2025-06-17 20:52:04
Installed easily on base camp, used a piece of hard foam as a spacer for the front velcro body mount to get high enough, shoe goo held that to the carbon tray after a few weeks and many used.As with anything that comes with these tiny screws give them a good look over and make sure the 0.050 hex fits them nice. If any resistance is felt in the threads try a different screw. Buy a 1.4mm scx24 screw set on amazon to have extras.Otherwise this kit is awesome, injora scx24 side skid plates to mount the electronics down low will only add to this great chassis. If you are looking at the swb chasssis kits this is the best bang for the buck. Lowering the centre of gravity makes a massive difference in technical crawling ability.I paired this chassis up with injora s5 tires/wheels, 40mm oil big bore shocks in the rear and rclions 33mm oil shocks on the front , Injora alum links, Underdrive ring/pinion in the rear,and the already mentioned side skids. Emax servo/mount. Esc/motor is a spektrum brushless, which when geared underdrive in the rear actually works good. Battery is a Tattu 7.4V 300mAh 2S 45C LiPo Battery, which is velcro'd to one of the skid plates, esc/rx on other.Other "adjustable" wheelbase and injoras lwb chassis both have horrible rear shock placement.
cascia
2025-06-13 10:56:42
Arrivato nei tempi previsti, ancora da assemblare. Sembra tutto ok.
Blond Michael
2025-06-08 17:13:27
Sans problème, merci.
Derrick Mattox
2025-05-23 17:01:13
It gives you way more options for setting up your truck. Just take your time and everything will go together easy. You won't be disappointed. ðŸ‘ðŸ¾
Patrick S.
2025-05-18 14:31:45
Just takes a little time to setup but once put together it works great comes with everything you need and puts the weight up front
Marcell
2025-05-05 12:39:18
Good bones. Kinda weird shock placement but you can manage.
L4J
2025-04-01 19:24:04
Got this chassis as a mod for an SCX24 Deadbolt. At this point, there are few original SCX24 parts left besides the drive shafts and the electronics. This chassis is lighter and stiffer than stock, looks good, and offers a fair number of suspension attachment points.Trouble is there are no instructions. At all. Which isn't that big a deal, since if you spend a lot of time tinkering with these small scale crawlers, you get used to figuring things out. But it may take a bit of tinkering to figure out exactly where you want to mount things, and there is only one "wide" platform, which means either the electronics or the battery will be relegated to one of the narrow ones.My build ended up with the wide platform to the rear to mount the electronics, and the battery in front held on with velcro. It works fine for my setup, but it would have been nice to have more options (more than one wide platform, tabs at the ends, etc.) since this setup isn't quite ideal.I give it top marks for quality though.
Thomas
2025-03-31 14:38:08
Budget friendly, great LCG Chassis for the price angled skid multiple shock mounts and easy to put together.
Tim Rickencraig
2025-03-25 10:52:15
I have a Bronco SCX24 built almost entirely with injora parts. For the incredibly low price, it is an absolute BEAST. However, I have a few tips for this chassis.1: Get longer shocks. In most cases, a build won't benefit from shocks longer than roughly 43 mm, unless the build has serious modifications. If you're using the stock chassis and links, 43 is the absolute limit. With these, 43 is almost a minimum if you're trying to run a stock body. It sits so low in relation to the wheels that a lot of your rebound travel will be taken up just to achieve ride height. Get longer shocks to compensate.2: Have some magnets handy for body mounting. They'll help a lot. Use 3m VHB double sided tape, it's the absolute best and it's crazy thin.3: My build has the injora steering link, and EMax servo. At full compression, the front of the chassis hits the bolt that links the steering rods. Trimming about 2mm off would fix it.4: It will take A LOT of patience to get a stock body to fit, and probably a lot of trimming.
Austin
2025-03-02 13:55:38
This chassis was really solid and really cool and looks really good. But if you're not very good at DIYing then you're going to struggle to relocate your ECS somewhere on this because it doesn't give you a set location for it. I just kind of stuck it between the shock towers and it just makes everything very difficult. Turning it on. Relocateing your back but on the shocks etc
Wyatt W.
2025-02-19 14:05:46
Works really good on my scx24. If your using a furitek motor then you want to get injora's side plates they make for your esc and reciever.
Michi
2025-02-11 14:16:05
Dem Motor könnte man mehr Platz geben.Aber sonst ein cooles Chassis.
joakim
2025-01-31 15:36:42
Bra men ingen beskrivning
JJBK
2025-01-29 17:42:22
Installed easily on base camp, used a piece of hard foam as a spacer for the front velcro body mount to get high enough, shoe goo held that to the carbon tray after a few weeks and many used.As with anything that comes with these tiny screws give them a good look over and make sure the 0.050 hex fits them nice. If any resistance is felt in the threads try a different screw. Buy a 1.4mm scx24 screw set on amazon to have extras.Otherwise this kit is awesome, injora scx24 side skid plates to mount the electronics down low will only add to this great chassis. If you are looking at the swb chasssis kits this is the best bang for the buck. Lowering the centre of gravity makes a massive difference in technical crawling ability.I paired this chassis up with injora s5 tires/wheels, 40mm oil big bore shocks in the rear and rclions 33mm oil shocks on the front , Injora alum links, Underdrive ring/pinion in the rear,and the already mentioned side skids. Emax servo/mount. Esc/motor is a spektrum brushless, which when geared underdrive in the rear actually works good. Battery is a Tattu 7.4V 300mAh 2S 45C LiPo Battery, which is velcro'd to one of the skid plates, esc/rx on other.Other "adjustable" wheelbase and injoras lwb chassis both have horrible rear shock placement.
cascia
2025-01-04 12:31:13
Arrivato nei tempi previsti, ancora da assemblare. Sembra tutto ok.
Blond Michael
2024-12-28 16:48:46
Sans problème, merci.
Recommended Products
