Your cart is empty.
Your cart is empty.The INNO Racks RT201 Truck Bed Bike Rack lets you mount your bike in your truck bed without sacrificing precious cargo space. This rack is made to carry just about any type of bike in the bed of every standard pickup truck. It includes two mounts for attaching ratcheting straps with adjustable rods to hold your bike firmly by its front fork and seat stay. There are no tools or drilling required and the entire process of mounting the bicycle can be done outside of the pickup truck bed. In addition, front tire removal is not necessary with the INNO Racks RT201.
R. Betts
July 30, 2025
This bike holder is just about perfect.1- it fits whatever size bike you have, I have a road bike and a mountain bike, and holds both great.2- does not mark the truck3- easy to install, took me 5 min including adjusting for the bike4- rock solid, my bike has never moved after a month of use.5- do not need to remove it when you’re using your truck bed. When I haul my goose neck trailer I just leave these on the side, and they don’t interfere with anything.6- the fittings are solid and are showing no sign of weathering.7- For the price, much less than other bike holders, I was worried about quality but they are much better than expected and work great.8- I don’t need to get into the truck bed. I can just lift the bike over the side and into the truck bed then clip it in.9- I have showed this to other truck owners with bikes, and quite a few have ordered it to fulfill there needs.10, security wise I use a cable lock through the bike frames and the tightening handles keeps every solid and one unit.If you can’t tell I think for me this bike holder just about ticks all the boxes
mary hyland
July 2, 2025
I read a lot of reviews on a lot of pickup bed bike racks and decided on this one. Reasons: 1. It was easy to install. 2. Somewhat reasonably priced. 3. Does not take up a lot of space when not installed - easy to keep in the truck for later use. 4. Does not take up a lot of space in the truck bed. Moves the bikes over as far as possible - leaving the center of the bed open for other items. 5. Very secure - hold my bike nice and tight. 6. The best thing...the front tire stays on the bike!. Some reviewers said their bike did not fit well in the brackets - their bike frame was too large. My trusty Trek 720 from around 1997 fit just fine - perfect. But I can see how larger frame bikes may not fit as well. I plan to mark the side rail of the truck somehow so I know where to place the rack if I remove it. I purchased two racks - one for each side of the truck bed. I can lock my bike to the truck using the tie down brackets. The first three photos are of the rack installed in my 2019 Ford Ranger Extended Cab/6 foot bed. Both our bikes fit with the tailgate closed (important). The last photo is of my old cobbled together bike fork rack - This one is SO MUCH NICER. Leaving with the popup camper next week for a few days in MN. Pulling the popup camper with bike and gear in the truck bed. Can't wait. Get this rack - you will not be disappointed. Pedal On.
John Long
May 17, 2025
I have tried several different types of truck bed bike mounts. This one by far ranks the best, its easy to install, easy to remove if your not using the bike for awhile. Loading and unloading of your bike is fast an easy. I would definitely add a wheel chock to keep your bike from moving during hookup, but once connected my big fat tire bike is as solid as a rock. A++++
PH-Plano
May 10, 2025
This is a well constructed bike clamping system that makes hauling your bike around in the bed of your truck super easy while keeping it fixed in place very securely. It works perfect in my 2012 F-150. It installs in about 15 minutes the first time because you have to tweak the positioning of each clamp so that it lines up with the frame and fork of the bike. Once that was done, and I had the bike securely strapped into the clamps, I scratched a little mark in the plastic bed rail protector on my truck to mark the exact positioning of each clamp for future reference. Each time I use the clamps now it only takes 2 minutes to set them up and lock the bike down. Each clamp has a swiveling tightening lever with a large hole in it so that you can thread a bike cable lock through it as well as the bike frame. This allows you to lock both bike and clamps in place if you leave it unattended. The only reason I gave 4 stars instead of 5 is due to the shape of the plastic ends on the horizontal screw arms that fit next to the bike frame. They are lined with rubber and concave in design on about a 1/2" radius. This allows them to snug up very tight to a round bike frame tube or fork that is 2" diameter or less. Unfortunately, the carbon fork on my bike has a very wide profile and so actually rests on the plastic portion of the clamp since it will not sit down in the concave "cradle" with the rubber lining. This may also be an issue for bikes with aero frame parts or trapezoidal frame tube designs. When the frame part rests on the plastic instead of on the rubber lining it has a tendency to wiggle a little bit and the plastic slightly mars the finish of the bike. Regardless, this is the easiest and best truck bed bike carrier I have seen compared to others that folks use in my riding group.
david jim
April 3, 2025
I was looking for a bike rake that was simple to put away in a small bag and to hold a bike in the bed on one of my trucks. I took it on beaten paths and rough roads and it hold the bike securely
Thom Muskat
March 28, 2025
This is a great setup for hauling bikes clamped to my Ford F150’s tonneau cover rail. I had my doubts initially before ordering but it works perfectly. I recommend using one complete set per bike. In my case, the mounting plates included in each kit were not needed as I clamped directly on to the aluminum tonneau rails. I’ve read some people have gotten by using one Inno clamp per bike but because of the flex in most tonneau rails I think it’s best to use a complete set of two for good measure.
S. Gosnell
March 15, 2025
Undoubtedly the best pick-up truck bike rack made. This is my 2nd one and the ease of installation and simple functionality make this the perfect solution for my bike transportation needs. Fully adjustable for any size bike! Here's a few more positive aspects of this rack: Although it's meant for one bike only, with a pair of solid straps, you can easily secure a 2nd bike to the 1st to make this rack accomodate two bikes. Also, I'm an avid fisherman and was looking for rod rack for my new pickup...this rack actually works perfectly as a rod rack. Easily holds 4-6 rods securely so this has met my needs for two different pastimes! Absolutely worth every penny!
Omar
February 19, 2025
I loved the product easy to install without breaking anything and it is of very good quality, unfortunately it doesn’t fit my bicycle fork because it is round and mine is an elliptical shape
Rick T
February 16, 2025
Great product. I can add more photos if needed.I needed something for my truck as I wasn't a fan of broken spokes with my lying bikes on top of another.Seen this product, read the reviews and decided to give it a try.One "gripper," per bicycle is fine, as stated in another review below. I used one per, and it worked out good. I also tied the front and back of the bikes to the truck bed for extra security and support - I used tie downs. Look for a spot that won't wreck your bike when tieing down, such as above the wheels on the metal parts.Drove 100k each way on the weekend for a Granfondo and the bikes barely moved.The "gripper" works on trucks with tonneau covers, obviously with the cover pulled back. It tightens on nicely with a little crank type thingy.Weight limit of 66 lbs I believe, so electric bikes need not apply.Great product if you want to use your truck bed to carry bicycles.
Chris B
January 28, 2025
Very sturdy and high quality. A little time consuming to take on and off as you need to screw them on like a vice - and so you have to unscrew them quite a ways in order to take them off. If you're not worried about having them stolen, you could just leave them permanently attached.
CJ Task
January 27, 2025
Impressed How quick I received , My tracking showed Washington state and I’m in small town rural Canada (ordered Friday, received Sunday afternoon) Very well Packaged, appears to be a quality device , purchased for pickup truck box for Mountain bike, fits perfect, the added rings for ratchet straps (hauling) is a bonus, in addition I tested inside Motorhome (Worked) clamping to dinette table to carry bike while travelling, then lock to RV bumper once stationary, holds bike sturdy, the bike upright position provides plenty of room to navigate past table, will save me hundreds on an RV hitch bike carrier, ðŸ‘.
Ghislain
January 26, 2025
Installation dans une boîte de camionLe support est très bien fait et facile d’installationLe seul problème est que la vis de serrage l’acier est trop molle Après quelques installations et désinstations les filets ont tendance à s’écraser
Recommended Products
