This fan works great, doesnt seem to be any louder than the stock one. More importantly the wires are the exact right length. If they were too long or too short, it would make it difficult to route the wires on the heatsink. Installation only took about a half hour including taking out and reinstalling the card, and it is much easier to do than it might seem. Finally, it is less than half the cost of the original replacement, so all around this is the way to go.

1080 ti Strix owner here, replaced fan A, and here to tell my story of why I got this. If you just want the cliff notes to whether you should get this or not, I'll sum it up first.-Installed in less than 5 minutes with a tiny philips head screwdriver.-Came in within days of ordering-Is not an upgrade over stock, but is a fine replacement for the 1080ti in need.-Looks almost stock just missing the sticker (if you could add the old stock one on, almost no one would notice)Now, let me explain what happened. Within an hour of me turning my computer on one morning, I heard what sounded like a screw falling inside my case. The next thing I know, the fan that has a single sliver exposed from the opposite side was making a mess of sounds. After turning off the computer and investigating, I had 2 broken fan blades on Fan A (going by this products ordering). What I suspect is that one broke, and the broken blade itself broke the second one. I was annoyed, I still never found the culprit, but I had something I needed to fix.I got in contact with ASUS, and over a series of emails asked them what they would estimate the repair would be given the situation. I told them that I knew that there is unlikely any other sort of damage, and that it would just be an out-of-warranty fan replacement. They never gave me anything. Repeatedly, they told me they could not given any sort of estimate, unless they knew the damages, even when I explicitly asked them just to quote just a fan replacement: nothing. I was disgruntled, but at the time, I didn't want to spend 200-300 on switching to some form of watercooling, so I felt this was my best option.I paid $15 to get the GPU shipped to them, and waited. It took almost 5 days from when I saw it arrived, until I got a quote back. The only damage listed on their report was the fan blade (what a surprise.) But the actual surprise: $820 to repair. Yup, they only listed that single fan to be replaced in the invoice, and it would cost me $790+tax to get it replaced. I was stunned, I was legit dumbfounded to think that I paid less for this card than what they're asking to charge me to replace the fan. I told them not to complete the repair, to send the card back, and I gave a very lovely worded email to them. And basically got a bot response.After that, I found these replacement fans, and decided to go with them before trying some form of watercooling for the card. Bought the full set, figured why not, and waited for my card to get shipped back to me.Within 5 minutes of opening up the box with my GPU in it, I had this aftermarket fan inside the shroud, and just had to install it to test it out. I could tell it didn't spin quite as well as the stock fans, but I wasn't going to complain about an $800 difference at that, I just wanted it to work well enough to have my GPU back. And it certainly is more than enough for that.This is not something you should think of upgrading at all, as if anything, they are just minimally worse than the stock fans. But when you consider that ASUS will probably try to gouge you out of hundreds of dollars just to get replaced by them? I don't see any world that going through them is a viable solution.All in all, this saved me and my GPU from being scammed out of $800 by ASUS. I just wanted to share my story, in hopes that if there is someone in the same shoes as me, that it can be of help. I'm tempted to order another one, just in the odds that I shoot myself in the foot and break it again, because of this very tale.

The fans on my strix 1080ti failed, after replacing them with these it's good as new and stays cool again.

It’s almost identical it’s slightly thicker then the original fans but you won’t even notice if your not looking for it, other then that it fit perfectly on my Asus 1080 ti.

Easy to install. No issues after 3 months. Hopefully lasts as long as OEM.

When one of the fans was going out on my GPU I thought for sure my old HDD was dying. What else in this machine has the capability to vibrate my entire case and make loud "thunk" noises? As it turns out, these tiny fans do!These worked just fine for about a year and then the same one went out that went on my original GPU. The originals lasted 6+ years, not sure why these wouldn't do the same. Oddly, the same fan (last in the line) went out on both the original and this one.Quality seems fine, fit was perfect, installation was easy. Probably just really cheap bearings. I honestly would probably buy these again because honestly I think I just got unlucky.

Fan A was starting to fail on my ASUS Strix GTX 1080. Ended up replacing the entire set of fans and these worked and fit perfectly.

Bought and it did not work. One of the fans spun very poorly and the GPU controller couldn't run at specified speeds. Bought the Cavabien version of this and it worked perfectly, go buy that one instead.

montage environ 30mn.Garder les vis d'origine et mettre bien à plat les 3 ventilateurs avant montage.Pour respecter l'ordre et les longueurs de fil, la liaison du ventilateur 1 coté connecteur 6points, doit passer par le dessus vers la droite.Je recommande de visser les ventilateurs du plus éloigné au plus prêt du connecteur 6 points en commençant à chaque fois par la vis de la patte du ventilateur.Test 24H , fonctionnement parfait, aussi silencieux que les ventilateurs d'origine et les pales me semblent plus solides (renfort latéral visible).

Lo compramos para sustituir el que tenía roto la gráfica del pc de mi pareja, Muy fácil de colocar y funciona de maravilla. Se acabó el ruido de la gráfica . Hay que escoger el modelo que se corresponda con el que deseas sustituir, pero está bien explicado en la info del producto en amazon. Lo recomiendo al 100%

they arrived well, but after a week of use unfortunately one of the fans wings came off. Now it can’t stop making noises again. Very disappointed in how fragile these things can be.

Came sooner than expected, saved my gpu and me some money. Fit&work perfectly

started making an audible rattling noise every time it starts spinning after a month and 10 days of barely any use because i had exams at the time and didn’t use my pc