Your cart is empty.
Your cart is empty.Product Description
ISPINNER 140pcs 12x30mm Self Drilling Drywall Anchors with Screws Kit, No Drill or Holes in Wall, Hangs up to 66 lbs
HIGH QUALITY MATERIAL
These drywall self-drilling anchors and screws are made of high quality yellow zinc plated carbon steel with high hardness, wear resistance and rust resistance.
EASY TO USE
No drill or holes in wall. You just need a hammer to strike the anchor into the wall and then screw the screw into the anchor hole. It will expand into two opposite sides, which can increase holding power, anti-rotation and with high stability.
KIT INCLUDES
- 70pcs Anchors
- 70pcs screws.
Be fair
2025-08-16 10:50:43
Game changer! These are very easy to use. No guesswork and they pound right into the drywall easily. They attach securely and solidly. I'll never use the old plastic anchors again after using these.
Jasmine
2025-07-26 11:45:06
Super easy and sturdy
Jose m novo
2025-07-04 18:31:27
Me sirven ðŸ‘
kenfrancisco
2025-06-15 13:58:33
Had a chance to try them out and if tapped into the usual 1/2" or 5/8" wallboard then all is ok. The taps should be gentle....not wham bam thank ya mame. They are a bit fragile if you can't control your hammer but I was happy with the overall results. I recommend them for wallboardðŸ‘ðŸ‘ðŸ‘ðŸ‘
Nick G.
2025-05-29 17:12:48
Extremely simple clever design. After poking two tiny 1/8 inch holes to mark the spots I was able to push the anchors into the sheet rock with just my thumb! I mounted a small metal shelf easily with just a Phillips screwdriver;- excellent anchors, highly recommended! These will be great for pictures clocks and other items weighing less than about 10 pounds. I don’t know if I would recommend it for heavy items hanging from the ceiling.
Roussallier
2025-05-14 16:00:38
I love these. They are thin but strong, and not a single one bent while being hammered into drywall. They hold up plenty of weight, from glass framed pictures to curtain rods. Easy to use and cheap, will buy again when I run out.
Justin Florida
2025-05-10 19:01:25
Wish i had found these long ago. Super easy to install, just drive into drywall and then insert a screw. I found that i had to be carefull when pounding them in or they would start to go in a bit sideways, but thats my fault. Also my brain says that if i install them so the slit goes up and down rather than sideways they might have a bit stronger hold in the wall? Not sure, as they seem strong enough no matter how you pound them in. ( i used the screwdriver handle)
MGN
2025-03-22 17:45:22
The anchors don’t work, it won’t take the screw in
Will
2025-02-11 18:38:32
This product is terrific.easier and better than plastic and no drilling. For the thinner drywall ,it is even more terrificAnd economical as well.should have found these sooner.works on wood too if needed
Toronto
2025-01-22 14:31:18
Really good method to secure something onto the drywall without creating a large hole.The way it expands while tightening provides a decent amount of hold within its limits and if you want to remove it it leaves a small hole that is barely noticable.
IR100
2025-01-03 14:53:29
Works like a charm, is easy to hammer in, a sharp point allows for precise location. No mess or dust, no trilling. Think use is limited to the screws supplied, as it has to match the plug's thread. Will see how it will last in the wall.
Customer
2024-12-11 19:37:46
These are the best anchors I’ve bought because I don’t own a drill and they were easy to use. There are so many in the box and the packaging isn’t great, but once you use a few, the box closes. I did have to throw some out after putting them in the wall (and then pulling them out) because the screw wouldn’t go in, but because there’s so many, it’s still worth it. They’re strong and have held up frames, hooks, etc with no problems.
Leo
2024-12-05 12:21:33
So much easier and better than regular wall plugs, used to hang a bunch of storage containers on wall
Recommended Products