Your cart is empty.
Your cart is empty.Product Description
Laundry Faucet Mounting Block. Non-Corrosive, Plastic with brass screws. Easy do-it yourself installation instructions.
From the Manufacturer
Laundry Faucet Mounting Block. Non-Corrosive, Plastic with brass screws. Easy do-it yourself installation instructions.
George G
2025-09-03 14:06:49
This block is to secure a faucet with supply lines on top, see photo. Because I did not have access to under the laundry tub without disconnecting all the drainage pipes i had to purchase a sheet of stock to go under the block. I attached the block to the nylon stock and then used stainless steel screws to attach the nylon stock to the tub. The block was a perfect.I highly recommend this block if you’re replacing your laundry tub faucets.
Dave
2025-05-23 12:07:21
I took advantage of extensive work to fix leak in laundry foundation wall and eliminated gigantic old cement tub. As with every plumbing job it kept snowballing into more and more little tricks I had to come up with. This was the answer to not replacing the spigot that used to clamp some wall. I used some fender washers and aligned the hot and cold line so they did not fight this but instead help hold it in place. The replacement single bowl plastic tub had no thoughts instructions or equipment to help you get it in solid!? I get the feeling you got to personalize your own setup. But this is an integral piece and switching from cement to plastic tub!!
F. F.
2025-05-19 12:01:18
Item arrived safely and on time.
LuckyLeo0820
2025-05-08 15:57:29
Bought for a utility sink and faucet i got locally at home depot. Not sure why these arent included with sink, but you will need one if setting up a similar combo. Fit perfect.
SdlewisSr
2025-04-07 16:45:59
I purchased this block to secure a faucet with supply lines on top (see link below and photos). Because of the raised area under the faucet (see photos), I also had to purchase a sheet of HDPE (see link below and photos) to go under the block. The block was a perfect solution for securing this faucet. I secured the block to the sink, through holes in the HDPE, from beneath the sink through the water line holes. I secured the faucet to the block with the hex head bolt (supplied with the faucet) in the rear and the two 1/2" brass screws (included with this block) in the front.Link to: Aqua Plumb 1828010 AB1953 REQST Two-Handle Rough Brass Laundry Tray Faucet with Adapterhttps://smile.amazon.com/gp/product/B00FO5EUZW/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1Link to: HDPE (High Density Polyethylene) Sheet, Opaque Off-White, Standard Tolerance, ASTM D4976-245, 0.250" Thickness, 12" Width, 12" Lengthhttps://smile.amazon.com/gp/product/B000ILJZN4/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
Jerry
2025-04-02 12:34:43
So far so good.
Valorie Lengyel
2025-03-08 13:22:19
Did what it was suppose to do a d I am happy with it.
Terry B.
2024-11-27 17:12:10
Seems to be well made. It's definitely "utility" which fit my purpose just fine and it arrived promptly.
Paul Levesque
2024-11-15 16:50:08
Worked great.
Recommended Products
$200.05
$ 87 .99 $87.99