Your cart is empty.
Your cart is empty.Product Description
Features:
- Small, exquisite workmanship, long service life.
- Clear display, easy to use.
- High accuracy, and stable working performance
- LED Display meter has wide measurement range of 60-500V, and 0-100A
Specification:
- Material: plastic
- Color:Red, white, blue, green(Optional)
- Installation size: Approx. 22mm/0.87"
- Accuracy: ±2%
- current range: 0-100 (A)
- Measurement range :60-500 (V)
- Input voltage :60-500 (V)
- Output voltage :0 (V)
- Ambient temperature: 0 to 50 (℃)
- Size: Approx. 15*9cm/5.9*3.5in
- Weight: Approx.47g~50g/1.7oz~1.8oz
Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
Package list:
- 1 x LED Display Voltmeter
Terry H. Williams
August 9, 2025
Worked perfectly - The toaster DOES actually draw 11.1 Amps.
Customer
August 7, 2025
I wanted a live readout on my electrical panel for my solar install. I found this while searching among rectangular ones and such. Could it be real? I only had to drill out a 22mm round hole? No way! One drill and a stepper bit and I had this beautiful thing installed into the face of my panel even before the surrounding metal cooled down. A small gripe was the lack of details to install it, but X1 and X2 for the voltage and the CT for amps. I used a 14 gauge standard SAE quick connector cable for the voltage leads to an unused breaker. The CT was installed with my 1/0 feeder cable and while it's quick connector is nice, it could be a tad longer though. With both of the sampling leads quick disconnecting types, I can remove my panel front without worry about holding it while working inside the box.Now I can witness the live readout of what's really going on in my solar grid and backup panels. It is so simple and didn't hurt my budget at all. I only had to connect two wires. Do note that this will not work on a 200A main service panel nor would the CT fit with 4/0 cabling. But for a sub panel or a feeder below 100A this works perfectly. The accuracy is decent and within a volt and amperage is roughly the same. I use these as a quick visual of the system status.
JawaExtra
June 4, 2025
Directions are a little lacking, but you probably have a good idea how to wire this in if you’re considering it. Reasonably accurate (all within 0.2 amps of my meter), definitely bright enough for indoor use. My only real complaint is wiring length for the hall sensor. You can extend them, but now you’re soldering 4 joints or crimping 4 splices. However at this price point that’s not a dealbreaker.
José A Jimenez
May 15, 2025
Very Good for the house electrician
Customer
April 29, 2025
Simple to install, inexpensive to purchase.
Captain Eric
April 14, 2025
Perfect for seeing the voltage of our service cable
Farasat Chaudhry
April 4, 2025
Display gone,Cheap
Jimmy L Miller
March 11, 2025
Perfect in my application
Jacoumie
March 1, 2025
Recommended
Dany B.
January 25, 2025
The media could not be loaded.
Ricardo
December 20, 2024
Todo bien y llegó en la fecha mencionada, gracias.
Rejean Gervais
December 17, 2024
parfait pour un montage et assez precis
Pascal
November 17, 2024
Recue endomager lecran est craquer
Recommended Products
$25.59
$ 12 .99 $12.99