Your cart is empty.
Your cart is empty.Product Description
Safe Protection: Double isolated
- Burn protection: Voltage and current Intelligent Adjustment
- Safety design : Slow boost , soft start. Increase the current steadily
- Automatically adapt to voltage and current Automatically identify lamp beads and light bay
- Can test light beads and avariety of good and bad light board and light bar
- Suitable for single LED beads, LED stirng, LED panel and Integrated optical LED
- Support testing the capacitance voltage and the diode voltage - No need to disassemble panel to test the LED strips which can save a lot of time for you
Applicable to any size LED TV , perfect backlight inspection and maintenance tool
- Input Voltage:AC 110-265V (International General)
- Output Voltage :0-300V (Adopt soft start mode, the voltage slowly increases.After power on, the voltmeter needs to wait for a few seconds to display the normal 300 value)
- Output Current:30mA
- Package include:
- 1 X LED Tester
- 2 X Test probe
- 1 X Power Plug
How to operate this LED Lamp LED TV Backlight Tester?
- Plug in power, it would be cost about 3 to 5 seconds to start
- The soft start mode make the backlight getting brighter gradually
- If you can't make sure which is""""+""""and """"-"""", then not test for a long time
- Don't touch the output terminal of probes for a long time
- Retardancy materials: Double Isolate Design makes tester safety with high strength and flame
LT
2025-08-28 11:18:58
I recently got my hands on the LED Light and TV Backlight Tester, and I couldn't be happier with this little tool. It's a must-have for anyone into LED repairs, whether it's for TVs, computers, laptops, or any other LED-based devices.The gold-plated pins are a nice touch, ensuring a solid connection without damaging the LED beads. The adaptive voltage range of 0-300V makes it suitable for testing all kinds of LED beads, and the included power cable is a convenient addition.This tester has made troubleshooting and repairing LED lights a breeze. It's straightforward to use, and the results are accurate. No more guesswork or trial and error when trying to fix LED issues.In short, if you're into LED repairs, this tool is a game-changer. It's affordable, reliable, and a valuable addition to your repair toolkit. Highly recommended!
cwf111
2025-08-20 13:52:38
I had a renter that left a LED TV with me, so I attempted to repair it. The tester told me that a lot of the backlight LEDs were bad, and that was the problem that was causing the TV picture to come on, and then go off repeatedly. Unfortunately, when I was taking the TV apart I cut what I thought were pieces of tape off that were attached to the LCD screen, but it turned out they were ribbon cables going to the LCD boards that were glued to the frame. I should have just removed the boards from the frame. Anyways, I ended up trashing the TV.
Audrene Edwards
2025-03-17 13:36:01
My dad loved it
getto farian
2025-03-02 14:04:03
Feels cheap in your hand with inferior materials. But it does the job well. Accurate readings but not sure if or how long it will last.
Exelente
2025-02-24 13:41:42
Buen producto
David Schneck
2025-01-09 11:22:16
Worked right out of the box. No setup. Voltage settings are automatic. Probes are sharp and well made. Well worth the price.
Lynn
2024-12-17 14:46:25
$17 tester + $30 replacement backlights + YouTube tutorial + a bit of patience = several hundred dollars in savings over the cost of buying a new TV!I'll start by saying that I was, early in my career, an electronic technician, so I'm very comfortable working on electronic gear. That said, I believe that anyone with a bit of DIY aptitude could use the tools listed above to inspect and, as needed, replace a bad set of LEDs in a TV. The purpose of the tester is simply to confirm that the original LEDs are bad. You could skip that step and assume that replacement will correct the issue, but if you're like me and tend to apply your skills to help out friends and neighbors, then the $17 spent can become more of an investment in good will.In any case, it worked, and if you need it, buy it!
Michael Knight
2024-11-19 16:28:00
I repair tvs quite often, and needed a good back light strip tester. This tester does exactly what I needed it to, and it's super easy to use. Just turn it on and it's ready to go. I like that you can test one individual lamp, or many at a time without any damage to the leds. It also helps me to diagnose an led strip by showing the voltage that the tested leds are using. I highly recommend!
Recommended Products