Your cart is empty.
Your cart is empty.Kindle Customer
2025-08-16 13:55:43
These worked great. Get some lithium grease with teflon to install them--it's a tight fit, as it should be.I had hoped I could get these in without pulling the rack and pinion completely out, but there was no way to get the old bushings out in that tight space. Pain in the neck job, but was told by two mechanics it would cost well over $1000, probably closer to $2000 to replace the rack and pinion (they wouldn't replace the bushings).
TN
2025-07-29 14:41:15
Bought these after trying Polyeurethane Bushings and cant get those ones to sit flush. With a C clamps these this set go in much easier and sit flush.
Mohammad Taqi
2025-07-26 13:50:24
The rack and pinion bushings are about 2 mm longer than other brands and cause to not set correctly ( not recomended )
Bob Cameron
2025-07-17 13:38:33
The steering rack for the Toyota 2007 sienna fwd were originally pressed in. So getting them out and using these would be a huge challenge I didn’t undergo. If you can replace yours that aren’t pressed to fit by the manufacturer then get them. They were great quality.
Daniel
2025-07-06 17:42:42
I instal in my toyota sienna and works perfect
Agustin Puente
2025-06-15 15:02:12
It was easy to install with a press. The difficult part is the removal of the old bushings.
JAVIER
2025-06-09 16:26:35
es exactamente como se describe
Luis Portillo
2025-05-22 12:53:32
They did the job
Ralph Cheng
2025-02-06 18:46:14
It is really easy to remove and install. It fits on my 08 sienna XLE limited perfectly and It took me 3 hours to complete the job. I have upload some photos for people who need tips about how to do it.
Recommended Products