Your cart is empty.
Your cart is empty.Lenox MetalMax is the new standard for metal cutting abrasives. Breakthrough diamond technology delivers 1,000 or more cuts (30 times longer life than thin bonded cutoff wheels)* without sacrificing speed or finish. Made of solid steel to greatly reduce the risk of breakage, the combination of a steel body with a diamond edge allows MetalMax to hold its original wheel diameter until the last cut, meaning better control, reach, and cut precision throughout the wheel life. The enhanced design substantially reduces dust particles and lessens odor. Lenox MetalMax is suitable for metal cutting applications including steel, sheet metal, stainless steel, rebar, cast iron, aluminum and non-ferrous metals, and works at the same speeds and feeds as thin bonded abrasive wheels.
Customer
September 3, 2025
This wheel is better than the $20+ diablo wheels. It cuts well. I use it for brass, copper and nickel silver.
J
August 8, 2025
I have always used those thin abrasive cut off wheels for cutting metal. Going through several every job, cost really adds up. More importantly they are very dangerous shedding pieces, into your skin!Those days are over. Since I have found these I will never use or buy anything other than this style cutting wheel. Cuts really well. Can also do light grinding. Most important they don't break or shead pieces making them soo much safer. Also last a LONG time! Love this product!
R. Clifton
July 29, 2025
Excellent cutting abilities compared to the standard cutoff wheels you may be used to. They of course cost a bit more but I have used only one of these so far and am happy to say, I have not had to replace it because it was completely worn down to the size of a silver dollar due to wear like the others I have experienced. It does save time and allows continued cutting without having to change the wheel quite as often. I usually buy a ten-pack of standard cutoff wheels, and I still have them but haven't used one since I bought this.
Public Eye
July 27, 2025
I used this to make several cuts in sheetmetal and aluminum angle bar. Did well on sheetmetal and it was much cleaner since the blade doesn't degrade and consume. 1/8" aluminum was much harder to cut but it worked. I noticed that the blade still looked good when I finished.
VtCollection
July 15, 2025
Pros: Superior, in many ways. This lasts far longer than abrasive cut off wheels, discs, and other Sawzall blades for sure. Extremely fast on smaller stock. Old but still new technology- Carbide toothed blades should be outdated, and spit shards of sharp metal into your face or hands even with serious PPE.Cons (although trivial) : It will make the metal (if its over 3/16ths) so hot you cannot touch it. Any metal gets hot through cutting, unless on a mill bandsaw.On 1/4" stock it will leave a burr of about 1/4" wide. Not a big deal. Lennox has always made the best metal cutting blades out there, and it makes short work of steel and lasts ridiculously long. It will cut through 3/4 as well...It takes about 3 to 4 cuts through 1/4" cold rolled steel to dull the best Sawzall blade, I've made at the least about 30 to 40 cuts through 1/4" thick angle iron and no signs of dulling yet.
Valerie Iskierka
July 7, 2025
Cut through several 1/2 x 6 inch pieces of steel and it still looked like new,
Wilbur Reaves
July 5, 2025
It was well worth the money, Last a long time, and will buy it again.
bob
July 1, 2025
As compared to cut-off discs, this cuts pretty slow. The only upside is the lack of debris from the cut-off discs as they wear out. From the get-go is was surprised how slow this blade cut steel so it cuts that way out of the box. I wont be buying another but instead i'll order more cut-off discs.
Cliente de
June 29, 2025
Tuve que cambiar un marco metálico de ventana y necesitaba un disco multi material para que en un solo paso poder cortar el marco y desbastar el concreto que rodea el marco, se puede hacer con un disco de pasta diamantado, pero es muy peligroso y la probabilidad de que se rompa el disco y provoque un accidente. Vi una reseña de uso de este disco y lo compré, funcionó perfecto y lo he usado en otros cortes de perfil metálico y lo hace sin dificultad y produce cortes muy finos.
Buyer
June 20, 2025
We use it for vanilla Siding, works extremely well. Also works when we need to cur metal ,not as fast a a good zip but not as much breakage on jobsite
منصور.م
June 12, 2025
ماشاء الله عملي عليها شبه شهري بس الØÙ‚ لله ممتازة
Seascape
June 9, 2025
It saved using a lot of ordinary cutting discs.
Jason
June 7, 2025
Cuts fast and hard threw stainless
Customer
June 6, 2025
This wheel is better than the $20+ diablo wheels. It cuts well. I use it for brass, copper and nickel silver.
J
May 13, 2025
I have always used those thin abrasive cut off wheels for cutting metal. Going through several every job, cost really adds up. More importantly they are very dangerous shedding pieces, into your skin!Those days are over. Since I have found these I will never use or buy anything other than this style cutting wheel. Cuts really well. Can also do light grinding. Most important they don't break or shead pieces making them soo much safer. Also last a LONG time! Love this product!
R. Clifton
May 7, 2025
Excellent cutting abilities compared to the standard cutoff wheels you may be used to. They of course cost a bit more but I have used only one of these so far and am happy to say, I have not had to replace it because it was completely worn down to the size of a silver dollar due to wear like the others I have experienced. It does save time and allows continued cutting without having to change the wheel quite as often. I usually buy a ten-pack of standard cutoff wheels, and I still have them but haven't used one since I bought this.
Public Eye
May 5, 2025
I used this to make several cuts in sheetmetal and aluminum angle bar. Did well on sheetmetal and it was much cleaner since the blade doesn't degrade and consume. 1/8" aluminum was much harder to cut but it worked. I noticed that the blade still looked good when I finished.
VtCollection
April 30, 2025
Pros: Superior, in many ways. This lasts far longer than abrasive cut off wheels, discs, and other Sawzall blades for sure. Extremely fast on smaller stock. Old but still new technology- Carbide toothed blades should be outdated, and spit shards of sharp metal into your face or hands even with serious PPE.Cons (although trivial) : It will make the metal (if its over 3/16ths) so hot you cannot touch it. Any metal gets hot through cutting, unless on a mill bandsaw.On 1/4" stock it will leave a burr of about 1/4" wide. Not a big deal. Lennox has always made the best metal cutting blades out there, and it makes short work of steel and lasts ridiculously long. It will cut through 3/4 as well...It takes about 3 to 4 cuts through 1/4" cold rolled steel to dull the best Sawzall blade, I've made at the least about 30 to 40 cuts through 1/4" thick angle iron and no signs of dulling yet.
Valerie Iskierka
April 18, 2025
Cut through several 1/2 x 6 inch pieces of steel and it still looked like new,
Wilbur Reaves
March 29, 2025
It was well worth the money, Last a long time, and will buy it again.
bob
March 18, 2025
As compared to cut-off discs, this cuts pretty slow. The only upside is the lack of debris from the cut-off discs as they wear out. From the get-go is was surprised how slow this blade cut steel so it cuts that way out of the box. I wont be buying another but instead i'll order more cut-off discs.
Cliente de
March 5, 2025
Tuve que cambiar un marco metálico de ventana y necesitaba un disco multi material para que en un solo paso poder cortar el marco y desbastar el concreto que rodea el marco, se puede hacer con un disco de pasta diamantado, pero es muy peligroso y la probabilidad de que se rompa el disco y provoque un accidente. Vi una reseña de uso de este disco y lo compré, funcionó perfecto y lo he usado en otros cortes de perfil metálico y lo hace sin dificultad y produce cortes muy finos.
Buyer
March 1, 2025
We use it for vanilla Siding, works extremely well. Also works when we need to cur metal ,not as fast a a good zip but not as much breakage on jobsite
منصور.م
February 26, 2025
ماشاء الله عملي عليها شبه شهري بس الØÙ‚ لله ممتازة
Seascape
January 31, 2025
It saved using a lot of ordinary cutting discs.
Jason
January 26, 2025
Cuts fast and hard threw stainless
Recommended Products
