Your cart is empty.
Your cart is empty.Diamond Cut Off Wheels, 3 Inch(75MM) Metal Cutting Wheel with 3/8 Inch(9.5MM) Arbor, Diamond Disc with 5000+ Cuts on Rebar, Steel, Iron and INOX
Customer
August 25, 2025
great product.
owen oconnor
August 1, 2025
I used the product and it does what it says.good job.
Customer
June 8, 2025
good price, good fit but have not used yet
spencer
May 31, 2025
At first I thought they were a little bit expensive because I was so used to those garbage fiberglass wheels exploding on me after I got a quarter inch into a piece of pipe. Once I used this though, before the first cut was done I already knew how great these were going to be. First of all, they don't spark half as much as the fiberglass ones. Don't know why that is but kinda nice.Another reason they are great is because they last forever. I put one on and even if I had used the fiberglass wheels down to the nub without having them explode, which would be quite impressive, I would have used 15 of them at the bare minimum to cut what one of these cut up. They don't explode, all they do is get dull and you can notice they take a while to cut stuff and it gets hotter. Thats when you replace it. I'll take that over having hot shrapnel whipped at my face any day!
Robert Olson
May 24, 2025
great.
Alienkayaker
May 23, 2025
Coach like butter!
Leo M.
May 6, 2025
Cut metal roofing with the blade, worked great, and it looks like I never used the blade.I have never used a blade that cut metal roofing this good. Still using the first blade, hard to believe.Wish I had this blade on the other metal roofs I have done, would have been faster and easier.
Kindle Customer
May 5, 2025
Loads up and stops cutting on aluminum.
David Dawson
April 29, 2025
Cuts metal terribly.
Newf
March 7, 2025
Please don't waste your money on these. They are definitely not worth the price tag! If they were like no more then 5.00ea maybe? They don't last long at all! I'm not sure how they come up with 5000+ cuts!? I am lucky if I got 25 cuts combined on all three blades! They become dull very fast, takes much longer to cut through larger bolts, 1/2" etc. I do truck and trailer repair for a living. I use my cut off disc's a lot, and the "only" benefit to traditional disc's is it's a metal blade and they don't break off mishandling them!
Addi Vazquez
February 17, 2025
Son muy buenos discos de corte ,tienen bastante durabilidad, lo único malo es que si los quieres para corte rápido no te funcionarán ya que este tipo de disco es para corte lento ,el cabado que dejan es bastante regular por lo menos si lo usas con esmeril
Recommended Products
