Your cart is empty.
Your cart is empty.Product Description
Any object you can try to create
1. Test in small batches before use;
2. In case of incompatible casting materials, apply a layer of sealant or epoxy resin first, and then proceed with the operation
Jvtaurus
2025-08-15 13:58:34
This stuff is my go-to for sure, and honestly, the Let's Resin brand seems to be quality no matter the product. As far as the mold making kit, it's great. Mixes easily, no bubbles, no chemical smell and a decent curing time. Some of my best molds were made with this, and I've used them numerous time with no change in quality or detail. Highly recommend to those starting with mold making, or even pros.
Melanie Linnell
2025-06-28 19:15:46
This mix is easy to prepare and doesn’t take too long to solidify. I’ve bought it a couple of times for small craft projects and it’s worked very well!
Michele A. Tobler Sutter
2025-06-24 17:30:00
Great stuff pretty easy to use, I do recommend using a scale to measure before mixing!
James
2025-06-17 21:50:39
I measured out a 50/50 mixture by weight per in instructions. Maybe I just got the wrong type of silicone but even after a week the finished product was slightly sticky and would leave a fingerprint mark if touched. Still did what I needed it to do but a better description from a novice silicone user might be helpful
Laura S
2025-06-15 16:19:56
I wanted to copy a statue for my garden and couldn't believe how easy this was to use! (But a little messy)Make sure you have the container ready and item (like a little statue) secured down when you pour the silicone in or it will float up and make a huge mess. It hardened within hours and my little statues came out perfectly. Didnt even have to mix as long as they recommended, and now the mold is very sturdy yet flexible, easy to get finished product out. Even parts where it was a little thin because of my placement are strong and no tears or rips at all. Great Product.
Taylor Fonseca
2025-05-31 14:22:05
this is the best size for the price honestly you get a LOT of use out of it. it dries faster than it says and dries very fast in the heat and humidity. never had bubbles, extremely easy to use and surprisingly easy to clean up (hasn’t ruined any surface). just make sure you mix thoroughly and don’t use the container you mix in to avoid any curing issues. if making pick pads, the thicker you make it the harder it is to pick from so it really lasts!
Cynda C.
2025-05-04 16:41:02
I love let Resin products. This is the first time having issues with any. Says 4hr cure time, yet I have made 8 molds at room temperature- cure time ranged 8-12 hours. The thickness at max 1in, depth 1-3 in. unfortunately I bought the largest container - 11 lbs. Really hinders time management. End product is great but 2-3x time to cure. Not happy about it. Would love replacement if offered.
glenn
2025-04-18 20:21:34
I figured to make a few trial pours with this sample kit, but the 8 x 8 inch piece I wanted to mold took nearly ALL of both bottles. This is OK, since I bought a MUCH larger kit (about 10x) of the same stuff!>>First off, measuring with a super-accurate scale was really important, since the parts A & B are equal parts by WEIGHT (and I was impressed by How Much More part B was by weight than part A.)>>(Equal parts by Volume won't work- it ends up being a sticky mess that never cures properly!)>I mixed 2 times A & B for this same mold having underestimated how much I needed, but the Silicone material allowed this (it was within 10 minutes for the second mix.)>Leveling of the mold was important since it's a FLAT texture that should make for some interesting effects.>After 4 hours the Silicone has solidified but I'm going to wait for about 10 hours to make sure.>Previous attempts with other casting compounds haven't worked BECAUSE: -(1)- Not proper proportions to begin with. -(2)- Not stirred enough to completely mix A & B. -(3)- Mold not level. -(4)- NO Mold Release used and the Silicone stuck to the molded surface and tore!>One of those small "Bulls Eye Bubble Levels" was used to get the mold LEVEL and I used some thin wedges to push under the mold to get that BUBBLE IN THE CENTER before anything else.>I mixed each A & B for at least 5 minutes with the flat spatula furnished in the kit (much better than a thin stick.)>I sprayed mold release -SELSIL- (Take Precautions!) on the surface YESTERDAY to give it lots of time to dry. Looking down through the clear smooth surface of the CURED Silicone there are NO bubbles or parts that are not fully formed on the mold surface.>I Read the INSTRUCTIONS, used a scale that made this all exact, and did everything in advance to make this try a Success. Altogether it took several days of preparation for one small mold, not including how long it took to carve the piece I molded.>>Take Your Time!
Voraxel Vauss
2025-03-12 15:32:37
Easy 1:1 measuring ratio. And a very durable final product. Casts so detailed i sanded the Master Form and all the cast pieces were ready for paint immediately.
Ale
2025-02-18 18:54:06
Lo uso para hacer mis propios moldes.
christine
2025-02-11 17:11:40
Love this product for making inlays, and it does't take long to cure about three hours.
oli
2025-01-19 15:43:04
fait bien son travail
Lars
2025-01-15 15:55:49
Preisgünstig und schnell geliefert . Gut zu verarbeiten .
Recommended Products